Aldo Barbera industrial centrifugal pumps and parts

Aldo Barbera industrial centrifugal pumps (Italy): CM horizontal units, AS vertical drainage pumps, DS submersible equipment, and mechanical seal sets.

Aldo Barbera dei F.lli Barbera industrial pumps

Founded in 1949 by Mr. Aldo Barbera, the enterprise manufactures tailored centrifugal pumps at its industrial plant in Brandizzo, Turin. Every pumping unit is built entirely in Italy according to rigorous industrial standards, with an assigned serial code for lifelong parts tracing.

Specialized Italian pump manufacturing in Brandizzo operating continuously since 1949
Complete in-house mechanical engineering delivering 100% Made in Italy equipment
Unique serial number on every pump enabling instant retrieval of original drawings
Technical selection of custom materials, motors, and mechanical shaft sealing options

CM series horizontal close-coupled centrifugal pumps

Aldo Barbera CM series horizontal enblock centrifugal pumps deliver reliable liquid transfer across industrial loops and utilities. The close-coupled arrangement between pump volute and electric motor eliminates alignment discrepancies, minimizing vibration and footprint.

Rigid close-coupled enblock configuration providing compact mechanical footprint
Durable bronze and iron alloy pump housings engineered for industrial durability
Single and dual mechanical seal packages tailored to specific media temperatures
Direct parameter calculation of flow rate and head matching application demands

AS series vertical drainage and sump pumps

The AS series vertical drainage pumps are designed for sump pits, collection basins, and underground wells. Featuring an overhead dry motor and submerged hydraulic volute, these units handle drainage wastewater, process runoffs, and abrasive slurry with elevated solids content.

Vertical semi-submerged architecture with motor positioned above liquid level
Open and vortex impellers ensuring dependable handling of suspended particulates
Intermediate shaft support guide bushings engineered with specialized materials
Configurable column immersion length tailored to exact tank depth dimensions

DS series submersible motor pumps for sewerage

Aldo Barbera DS series submersible pumps provide heavy-duty movement of municipal and industrial sewage streams. The hermetic motor and dual silicon carbide mechanical seals submerged within an oil chamber guarantee continuous pumping duty under full liquid submersion.

Heavy-duty submersible motor construction meeting IP68 ingress protection norms
Tandem dual mechanical seals within an oil reservoir protecting motor windings
Non-clogging single-channel and vortex impellers clearing heavy solid matter
Automatic discharge coupling system facilitating rapid guide-rail retrieval

Pumps for molten salts, hot sulfur, and wax

Custom engineered Aldo Barbera pump assemblies are built to pump molten salts at temperatures reaching 430°C, liquid sulfur, paraffin, and waxes. Heating jackets around the pump body prevent crystallization, while heat-tolerant alloys counteract high thermal expansion stresses.

Extreme fluid operational temperatures accommodating molten salts up to 430°C
Integrated thermal jackets with steam or thermal oil circulation around volute
Refractory stainless steels and high-nickel alloys resisting severe corrosion
Engineered thermal expansion clearances across shaft and mechanical bearing sets

EA self-priming and VI vertical line-shaft pumps

The manufacturing lineup features EA electric self-priming pumps and VI vertical internal shaft units. Systems are tailored to custom technological requirements, offering explosion-proof ATEX construction for hazardous areas and build compliance matching standard API 610 criteria.

Integrated priming chamber on EA series facilitating swift suction lift startup
Vertical internal axis architecture on VI units suited for tank fluid drainage
Optional explosion-proof design in compliance with European ATEX regulations
Mechanical layout and inspection procedures aligned with standard API 610 rules

Aldo Barbera manufacturing heritage and Italian engineering principles

Italian manufacturing enterprise ALDO BARBERA dei F.lli Barbera s.r.l. was established in 1949 by Mr. Aldo Barbera in Brandizzo near Turin.

For more than seven decades, the plant has continually refined manufacturing techniques for industrial centrifugal pumps handling water, aggressive media, and dense process fluids.

Operating under the 100% Made in Italy philosophy, fluid dynamics development, mechanical machining of pump housings, and precision dynamic balancing of impellers proceed at the Brandizzo factory.

Every manufactured pumping assembly receives a dedicated serial code registered in archival logs, facilitating recovery of design blueprints and reliable identification of replacement parts throughout unit operational life.

CM series horizontal close-coupled pumps for industrial flow loops

Aldo Barbera CM series horizontal close-coupled centrifugal pumps are engineered for efficient circulation of clean process liquids, cooling water, and utility fluids in processing loops.

The rigid coaxial integration between electric motor and pump volute suppresses radial shaft deflection and prolongs bearing assembly endurance. Hydraulic volutes are produced from resilient iron or corrosion-resistant bronze alloys suited for brine applications.

Depending on fluid temperature and chemical properties, CM assemblies incorporate single or dual mechanical shaft seals featuring silicon carbide or graphite friction interfaces, preventing leaks and safeguarding workplace environmental integrity.

AS series vertical semi-submerged pumps for drainage and sump basins

Aldo Barbera AS series vertical drainage pumps are developed for dependable evacuation of runoffs and thick industrial slurry from deep pits, sumps, and underground retention basins.

The semi-submerged mechanical arrangement places the electric motor dry upon an upper mounting baseplate while the hydraulic volute remains submerged, shielding drive elements from harsh liquid contact.

AS pumps feature open or semi-open vortex impellers providing uninhibited clearance for fibrous matter and abrasive particulate slurries.

Immersion column length is configured to match exact sump depth, while intermediate shaft guide bushings are fashioned from wear-resistant polymers or specialized bronze alloys.

DS series submersible motor pumping sets for municipal and plant effluent

Aldo Barbera DS series submersible pumps are engineered for continuous handling of heavy wastewater, municipal effluent, and industrial sludge carrying high abrasive content and suspended solid lumps.

Pumping units operate under continuous immersion at the bottom of collection sumps or lift stations. The sealed oil-filled electric motor remains protected against exterior fluid penetration through tandem dual mechanical seals installed within an intermediate barrier oil reservoir.

For rapid regular maintenance, DS units incorporate an automatic guide-rail duckfoot discharge claw, enabling swift raising and lowering of the pumping assembly without requiring personnel to enter or drain the sump pit.

Engineered pumping systems for high-temperature molten salts and sulfur

A notable specialization of Aldo Barbera engineering involves bespoke pump architectures designed for extreme thermal conditions.

The enterprise produces high-temperature centrifugal pumps designed to move molten salt mixtures up to 430 degrees Celsius, serving solar thermal energy installations and molten salt loops, along with dedicated equipment for molten sulfur, bitumen, and wax.

Hydraulic pump bodies feature integrated heating jackets with steam or thermal fluid circulation to prevent fluid freezing and crystallization.

Wetted components are machined from heat-resistant austenitic stainless alloys and nickel alloys, with calculated thermal expansion clearances for shafts and bearings.

Technical spare parts selection and lifetime centrifugal pump maintenance

Technical procurement of replacement parts for Aldo Barbera pumps relies upon exact equipment identification via the unique serial number stamped on the metal nameplate.

Using this serial identifier, factory engineers access original manufacturing blueprints and specific build records for the designated pump revision.

This capability ensures swift provision of matching hydraulic parts: impellers of required diameter, stainless steel drive shafts, pump volutes, shaft sleeves, bearing housings, elastomeric sealing gaskets, and mechanical shaft seal assemblies.

Thorough calculation of hydraulic parameters guarantees restored unit performance matching catalog technical ratings.

Aldo Barbera and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Aldo Barbera and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.