Wattsan CNC Laser and Milling Machinery

Industrial Wattsan CNC laser and milling machines, handheld laser welding and cleaning stations, and replacement parts: equipment selection tailored to your factory duty.

Wattsan CNC CO2 laser cutting and engraving machines

Industrial Wattsan CO2 laser machines of the 0203 Micro, 0503, 6040, 6090 LT/ST, 1290 LT/ST/Duos, 1610 and 2030 series with work areas up to 2000x3000 mm. Built for cutting and engraving plywood, acrylic, polymers and textiles with lifting or through honeycomb and blade work tables.

Series 0203 Micro, 0503 Hobby, 6040, 6090, 1290, 1610, 2030 Flat Bed
Table layouts: static ST, motorized lift LT and twin-head Duos versions
Ruida RDC6445G controllers, HIWIN guide rails, Leadshine stepper drivers
Through-body frame layout for processing continuous roll and sheet goods

Wattsan CNC fiber laser metal cutting machines

Wattsan fiber laser cutting systems of the 1530, 2040 and 2060 series equipped with laser sources from 1.5 kW to 25 kW. Designed for high-speed precision cutting of carbon steel, stainless alloys, aluminum, brass and copper plates with positioning repeatability down to 0.02 mm.

Working tables 3000x1500, 4000x2000 and 6000x2000 mm with exchange pallet
Configurations: open E-type, enclosed S-type cabin and rotary tube cutters
Raycus, Maxphotonics and IPG power sources, Raytools autofocus cutting heads
Heavy stress-relieved welded machine base with digital AC servo drives

Wattsan Fiber, UV and CO2 laser marking machines

High-precision industrial Wattsan marking stations for indelible barcodes, QR matrices, graphics and serial codes. The range features FL TT desktop and FL floor fiber systems, cold-beam UV marking stations for glass and plastics, and CO2 marking units for organic substrates.

Wattsan FL TT desktop and FL floor marking stations with motorized column
UV cold-marking stations at 355 nm wavelength with minimal heat impact
Sino-Galvo high-speed scanners, F-Theta lenses for fields up to 300x300 mm
EzCad 2 and EzCad 3 boards with rotary chuck synchronization support

Wattsan multi-function laser welding and cleaning systems

Multi-function Wattsan 3-in-1 and 4-in-1 laser stations powered by CW and QCW fiber sources rated at 1000, 1500, 2000 and 3000 W. Combine handheld seam joining with wire feeding, non-contact rust and oxide stripping, and thin sheet trimming in one mobile workshop machine.

Operating modes: seam joining, surface ablation and sheet trimming
Fiber source ratings: 1000, 1500, 2000, 3000 and high-output 6000 W
Ergonomic handheld torch assembly with dual-drive automatic wire feeder
Integrated dual-circuit chiller for cooling the optical tool and source

Wattsan CNC router and milling portal machines

Heavy-duty Wattsan CNC routers of the 0404 Mini, 0609, 1313, 1325, 1530, 2030 and 2040 series for 2D profiling and 3D carving in solid wood, MDF, engineering polymers, composites and non-ferrous metals. Supplied in M1 manual tool clamping and A1 automated tool changer configurations.

Work tables from compact 400x400 mm up to full-format 2000x4000 mm beds
High-speed GDZ and HQD spindles rated from 1.5 kW up to 9.0 kW with ER collets
Combined vacuum table grids with T-slots and high-flow vacuum pump systems
HIWIN 20 mm linear rails, helical gear racks on X/Y and TBI ballscrew on Z

Wattsan optics, laser components and spare parts

Replacement components and optics for Wattsan CNC laser and routing machines: sealed CO2 tubes, fiber modules, focusing optics, high-speed spindles, drive motors and digital boards. We select parts by machine serial plate, assembly drawing or component marking.

Reci, Lasea, Yongli CO2 glass tubes with matching high-voltage power packs
ZnSe focusing lenses, Mo/Si mirrors, fused silica quartz windows and nozzles
S&A, Hanli and DVT refrigeration chillers for optical tool and tube cooling
Ruida and DSP controllers, HQD spindles, Leadshine drives and ER collets

Wattsan industrial CNC engineering and manufacturing standards

Wattsan designs and builds computer numerical control laser and milling machinery for continuous factory duty cycles.

Established in 2003 with modern production facilities covering over 43,000 square meters in Jinan, the enterprise utilizes heavy-duty welded frames that undergo high-temperature furnace stress relief.

This thermal annealing eliminates internal material stresses, ensuring enduring positional accuracy and geometric stability across high-speed cutting cycles.

The manufacturing catalog spans desktop and portal CO2 cutters, high-output fiber metal sheet cutters up to 25 kW, versatile laser marking stations, mobile laser seam joining and surface ablation units, and multi-axis CNC routing centers with automatic tool magazines.

Each platform integrates premium motion guide rails, precision ball screws and digital control architecture for demanding industrial shops.

Component selection and matching by machine serial plate

Our technical specialists assist production facilities with selecting matched components, replacement optics and electronic units using Wattsan machine serial plates, assembly manuals or part markings.

For CO2 laser machines, we supply sealed glass laser tubes from Reci, Lasea and Yongli paired with high-voltage power packs, ZnSe focal lenses, molybdenum reflecting mirrors, dynamic timing belts and stepper motor drives.

For fiber laser cutting and welding systems, we configure Raycus, Maxphotonics and IPG power modules, Raytools cutting head consumables, protective quartz windows, ceramic sensor rings, precision cutting nozzles and dual-circuit water chillers.

For CNC routers, we deliver high-frequency GDZ and HQD spindles, digital inverters, tool calibration touch probes and precision ER collet chucks.

Routine maintenance for laser optics and high-speed spindles

Sustained performance in demanding shop environments requires adherence to scheduled inspection procedures.

On CO2 laser equipment, operators should regularly verify the cleanliness of reflective mirrors and focusing lenses, inspect beam alignment across all three axes, maintain cooling fluid temperatures between 18 and 22 degrees Celsius in refrigeration chillers, and keep optical surfaces clear of organic smoke residues.

Fiber laser cutting heads require daily inspection of the bottom protective cover glass to prevent slag accumulation and thermal damage to collimation optics.

CNC routers demand periodic lubrication of HIWIN linear bearing blocks, verification of gear rack backlash, and spindle collet cleaning to eliminate tool runout and maintain smooth surface finishes on machined timber and aluminum panels.

Ordering workflow, international logistics and technical assistance

We provide complete business-to-business support for industrial enterprises, manufacturing workshops and maintenance facilities. Commercial offers include itemized technical specifications, component data sheets and direct transport options.

Standard parts and wear items ship rapidly via verified courier and freight services to minimize factory downtime during maintenance turnarounds.

Every shipment is backed by engineering consultation on mechanical installation, optical alignment and software parameter configuration.

Our engineers assist operators with setting cutting speed and gas pressure tables in Ruida RDWorks, CypCut and DSP handheld systems, providing practical guidance on processing diverse materials from wood to reflective metals.

Equipment retrofits and performance upgrades for Wattsan machinery

We offer engineering recommendations for retrofitting existing Wattsan CNC machines to expand their operational versatility.

For CO2 laser platforms, upgrades include converting static work tables into motorized lifting tables, adding synchronized rotary attachments for cylindrical drinkware engraving, and installing higher-output laser tubes paired with high-flow exhaust blower systems.

On Wattsan CNC routing machines, facilities can upgrade from manual tool clamping to automated tool changers with ISO30 toolholders, transition to modern DSP remote controllers with advanced 3D contouring algorithms, add multi-zone vacuum hold-down table tops with liquid-ring vacuum pumps, and incorporate efficient dust extraction hoods for clean shop operations.

Industrial processing sectors and manufacturing capabilities

Wattsan machines operate across diverse manufacturing fields including cabinetmaking, architectural joinery, sign making, composite panel fabrication and packaging production.

High-precision CO2 cutters and portal routers produce custom acrylic POS displays, architectural models, wooden gifts, textile cutouts and leather components with clean edges and tight dimensional tolerances.

Fiber laser metal cutters deliver high productivity in structural steel fabrication, electrical enclosure manufacturing, metal furniture production and machinery construction.

The machines produce dross-free edges on carbon steel, stainless alloys and aluminum sheets, streamlining subsequent bending and welding operations without secondary abrasive deburring.

Wattsan and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wattsan and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.