ACM Research (ACMR) Wafer Cleaning Equipment

Selection and export configuration of ACM Research (ACMR) Ultra C single-wafer and batch wet processing systems — SAPS, TEBO, Tahoe, wb, s, b, we, and vac — for 200 mm and 300 mm IC, memory, and WLP/PLP fabs.

Ultra C SAPS Megasonic Cleaning

ACM Research (ACMR) Ultra C SAPS systems alternate megasonic wave phases in the gap between transducer and wafer. Uniform acoustic energy clears random defects on flat, patterned, and Bosch-etched TSV wafers. Core assemblies include SAPS transducers, nozzles, and ULPA FFU modules.

  • Wafer size: up to 12 in (300 mm)
  • Targets: flat, patterned, TSV
  • TSV study: 5×50 µm post-Bosch
  • Subassemblies: transducers, nozzles, ULPA

Ultra C TEBO Damage-Free Cleaning

Ultra C TEBO 12-inch single-wafer systems use Smart Megasonix cavitation control for damage-free cleaning of 1x nm FinFET and 3D NAND structures with aspect ratios up to 60:1. Modules scale across 1–12 chambers and 2–4 load ports. Flow holds ±0.3 lpm and temperature ±0.5 °C.

  • Config: 1–12 chambers, 2–4 robot arms
  • Structures: FinFET, 3D NAND up to 60:1
  • Precision: ±0.3 lpm, ±0.5 °C
  • Parts: TEBO units, nozzles, ULPA FFU

Ultra C Tahoe Hybrid & Hot SPM

ACM Research (ACMR) Ultra C Tahoe pairs a 25-slot batch SPM tank with nine single-wafer chambers for 300 mm wafers above 200 WPH. Sulfuric acid usage drops up to 75%. Up to four arms dispense SC1, HF, and DI-O3 with jet spray, SAPS/TEBO, and hot IPA vapor drying.

  • Wafer & rate: 300 mm, >200 WPH
  • Hybrid: 25-slot bench + 9 chambers
  • Chemistries: SPM, SC1, HF, DI-O3, IPA
  • H2SO4 savings: up to 75% (tests >80%)

Ultra C wb Wet Benches & sCO2 Dry

ACM Research (ACMR) Ultra C wb automated wet benches handle batch photoresist stripping, SC1, SC2, and hot phosphoric baths before oxidation or deposition. Memory platforms add supercritical sCO2 drying for >50:1 trenches. Key parts include QDR tanks, heaters, and pumps.

  • Chemistries: SPM, SC1, SC2, H3PO4
  • Applications: 3D NAND & DRAM (>50:1)
  • Drying: hot IPA and sCO2 collapse-free
  • Parts: QDR modules, heaters, chem pumps

Ultra C s Scrubbers & Backside Tools

ACM Research (ACMR) Ultra C s scrubbers, Ultra C b backside cleaners, Bevel Etch / Ultra C bev-p, and Post-CMP tools serve IC, WLP, and PLP lines. They clean wafer backsides and bevels while protecting front-side devices. Subassemblies include brushes, N2/DIW nozzles, and chucks.

  • Models: Ultra C s, Ultra C b, bev-p
  • Steps: Post-CMP, backside, bevel etch
  • Markets: IC fabs, WLP, panel packaging
  • Parts: brushes, N2/DIW nozzles, chucks

Ultra C we Etch & WLP/PLP Systems

ACM Research (ACMR) Ultra C we wet etchers process 8- and 12-inch wafers across 4–8 chambers with scanning nozzles, 2-chemical reclaim, and ±0.3 lpm control. WLP/PLP tools also include Ultra C vac / vac-p flux cleaners, Ultra C ct/dv tracks, and Ultra C pr strippers.

  • Wafer size: 8 in & 12 in (200/300 mm)
  • Chambers: 4–8 double-sided, 2-chem reclaim
  • Packaging: Ultra C vac / vac-p, ct/dv, pr
  • Parts: scan nozzles, seals, robot arms

Platform Selection by Wafer Node and Process Step

ACM Research (ACMR) covers front-end IC fabrication, memory, compound semiconductors, and advanced WLP/PLP packaging with single-wafer SAPS and TEBO Smart Megasonix tools capable of damage-free 1x nm cleaning on FinFET and 3D NAND features up to 60:1 aspect ratio.

For low-to-medium temperature SPM stripping, the hybrid Ultra C Tahoe pairs a 25-slot batch tank with nine single-wafer chambers above 200 WPH while cutting H2SO4 consumption up to 75% (>80% in Shanghai tests, <6 particles at 26 nm).

High-aspect-ratio memory lines integrate Ultra C wb wet benches (including hot H3PO4) with supercritical sCO2 drying to prevent pattern collapse.

Global Fab Integration and Configuration Scope

ACM Research tools operate across Asia, North America, and Europe, supported by development and manufacturing hubs in Shanghai and Incheon and recent multi-tool 300 mm single-wafer deployments to a Singapore semiconductor foundry for backside cleaning and wet etch.

Equipment quotations specify wafer diameter (200 mm or 300 mm), chamber count (1–12 on TEBO, 4–8 on Ultra C we), load ports, chemical delivery modules (SPM, SC1, SC2, HF, DI-O3, hot phosphoric acid), reclaim loops, and hot IPA or sCO2 drying options.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.