TG Drives / TG Drives s.r.o. — Servo Motors, Drives, Gearboxes & Motion Control
Industrial servo motors (TGN, TGM, TGQ), digital servoamplifiers (TGZ, AKD), planetary gearboxes (SG, SGFN), actuators and TG Motion controllers sourced to specification.
Synchronous AC Servomotors TGN, TGM, TGT, TGS & TGH
TG Drives s.r.o. synchronous servomotors across 10 frame sizes drive CNC machines, packaging lines and robotics. Ratings span 0.03–115 Nm stall torque, 200–15000 rpm and 18–560 V DC bus. Legacy TGH fits older installs. Spare parts: resolvers, EnDat/BiSS/HIPERFACE encoders, brakes, bearings.
- Stall torque: 0.03–115 Nm across 10 frame sizes
- Rated speed 200–15000 rpm, power 10–17803 W
- Feedback: Resolver, EnDat, BiSS, HIPERFACE
- Parts: feedback sensors, holding brakes, bearings, seals
Frameless Direct-Drive Torque Motors TGQ1–TGQ7
High-pole TGQ frameless torque motors integrate directly into rotary tables and indexing axes without gearboxes or belts. Seven sizes TGQ1–TGQ7 deliver 2.3–469 Nm stall torque and 4–1407 Nm peak torque with high torsional stiffness. Parts: stator winding rings, magnet rotor sleeves, angle sensors.
- Seven frameless sizes: TGQ1 through TGQ7
- Stall torque 2.3–469 Nm, peak torque 4–1407 Nm
- Direct-drive integration without mechanical backlash
- Parts: stator rings, rotor sleeves, thermistors, encoders
Compact Rotary Actuators & Cycloidal Drives DriveSpin
TG Drives rotary actuators pair a servomotor with a backlash-free cycloidal reducer in a compact unit. Hollow-shaft versions pass hoses and cables in robots and indexers under high radial loads. Parts: cycloidal gear modules, crossed-roller bearings, seals, sensors.
- Zero-backlash motor-to-cycloidal gearbox coupling
- Hollow-shaft options for internal media routing
- Compact footprint with high radial and axial load capacity
- Parts: cycloidal cartridge, oil seals, feedback sensors
Exlar Roller-Screw Linear Actuators
TG Drives integrates Exlar GSX, GTX, GTF, GTW, FTP, FTX and K linear actuators with a planetary roller screw inside the servomotor. They replace hydraulic and pneumatic cylinders in pressing and dosing with lower noise. Parts: roller screws, thrust bearings, seals, encoders.
- Exlar lines: GSX, GTX, GTF, GTW, FTP, FTX, K
- Planetary roller screw integrated into servomotor frame
- Electromechanical alternative to hydraulic/pneumatic cylinders
- Parts: roller-screw assemblies, rod seals, bearings, encoders
TGZ Digital Servoamplifiers & TGS-320 Power Modules
Single- and dual-axis TGZ-48, TGZ-S-230, TGZ-D-320 (fed by TGS-320-10/15), TGZ-S-400 and TGZ-D-560 drives cover 0–560 V DC, 3–100 A rms and 425 A peak. Firmware selects EtherCAT, CANopen or PROFINET Z14414 and EnDat/SSI/HIPERFACE DSL. Parts: IGBT stages, boards, fans.
- 0–560 V DC bus, 3–100 A rms nominal (425 A rms peak)
- Variants: TGZ-48, TGZ-230, TGZ-320, TGZ-400, TGZ-560
- Fieldbuses: EtherCAT, CANopen, PROFINET Z14414 / PROFIsafe
- Parts: IGBT modules, logic boards, connectors, cooling fans
AKD Digital Servoamplifiers for Rotary & Linear Motors
AKD servoamplifiers in TG Drives s.r.o. systems drive rotary and linear servomotors over EtherCAT, CANopen, PROFINET and EtherNet/IP networks. Multiple feedback ports and WorkBench software handle loop tuning. Parts: power modules, I/O cards, brake choppers, connectors.
- Drives rotary and linear synchronous servomotors
- Buses: EtherCAT, CANopen, PROFINET, EtherNet/IP
- Multi-feedback ports and WorkBench parameterization
- Parts: power stages, fieldbus cards, connectors, fans
TG Motion Controllers: TGMmini, TGMcontroller & TGZ+Motion
TG Motion systems cover TGMmini (virtual PLC plus HMI, AUTOSAR, Safety over EtherCAT), TGMcontroller (64 EtherCAT axes, 3×10-axis CNC interpolators) and TGZ+Motion. They drive CNC machines, Robot Base Mini AGVs and 800 kg loaders. Parts: CPU boards, I/O modules, HMI panels.
- TGMcontroller: up to 64 EtherCAT axes, 3×10 CNC axes
- TGMmini: virtual PLC and HMI with Safety over EtherCAT
- TGZ+Motion: servoamplifier with integrated TG Motion PLC
- Parts: CPU modules, EtherCAT I/O blocks, HMI screens, cables
Planetary Gearboxes SG, SGQ, SGFN & SGFE
Shaft gearboxes SG (SG040–SG160 to 800 Nm, SG050–SG155 to 460 Nm, IP54) and SGQ (98% efficiency) deliver 6–22 arcmin backlash. Flange SGFN064–200 reach 27–1800 Nm at 1–5 arcmin backlash and IP65. Parts: planet gears, carriers, output bearings, lip seals, flanges.
- Shaft SG / SGQ: 5–800 Nm cyclic torque, 6–22 arcmin, IP54
- Precision flange SGFN064–200: 27–1800 Nm, 1–5 arcmin, IP65
- Economy flange SGFE064–110: 5–260 Nm, efficiency up to 98%
- Parts: planet carriers, output bearings, seals, adapter flanges
Integrated Motion Architecture by TG Drives / TG Drives s.r.o.
Founded in 1995 in Brno, Czech Republic, TG Drives, s.r.o. builds matched servo motion packages combining AC synchronous servomotors (TGN, TGM, TGT, TGS; legacy TGH replacements), frameless torque motors (TGQ1–TGQ7), digital servoamplifiers (TGZ, AKD) and planetary gearboxes (SG, SGQ, SGFN, SGFE).
For space-constrained rotary joints, DriveSpin cycloidal actuators offer hollow-shaft media routing and minimal backlash, while Exlar GSX, GTX, GTF, GTW, FTP, FTX and K planetary roller-screw linear actuators replace hydraulic and pneumatic cylinders in heavy linear positioning.
Bus Topologies, Voltage Tiers and Feedback Compatibility
TGZ servoamplifiers scale across 0–48 V DC mobile drives (TGZ-48, up to 100 A rms / 425 A peak), single-phase 230 V AC (TGZ-S-230), 320 V DC via TGS-320-10/15 supply modules (TGZ-D-320), 400 V AC (TGZ-S-400) and 560 V DC dual-axis units (TGZ-D-560).
Firmware selects EtherCAT, CANopen or PROFINET (Z14414 tested for PROFIsafe telegram 31/36 and PROFIdrive) alongside HIPERFACE DSL, EnDat, SSI or Resolver feedback, controlled by TGMmini (AUTOSAR, Safety over EtherCAT) or TGMcontroller (up to 64 servo axes and 3×10-axis CNC interpolators).
TG Drives and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of TG Drives and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for KEB
- Equipment and parts for WANSHSIN
- Equipment and parts for MAKISHINKO
- Equipment and parts for FATEK
Documents and sources
- About TG Drives, s.r.o. — Servo Drive Manufacturer Since 1995
- Industrial Servomotors, TGQ Torque Motors, Rotary & Exlar Linear Actuators
- TG Drives Servomotor Configurator — Series S, N, H, M, T Limits
- Digital Servoamplifiers TGZ, TGS-320 Supply & AKD Drives
- TG Drives Servoamplifier Configurator — TGZ Ratings
- TGZ PROFINET IO / PROFIsafe Test Report Z14414 (PDF)
- Motion Control Systems TG Motion — TGMmini, TGMcontroller & TGZ+Motion
- Planetary Gearboxes for Servo Motors — SG, SGQ, SGFN & SGFE
- TG Drives Mechatronics — Robot Base Mini & Modular Robotic System
- TG Drives Downloads — Manuals, GSDML/EDS/XML & Service Software
