Aircrete Europe (Aircrete) AAC Plants & Flat-Cake Cutting Lines

Turnkey autoclaved aerated concrete plants, horizontal Flat-Cake cutting lines, ALU SAFE dosing systems, steam-recovery autoclaves, and spare parts from Aircrete Europe (Aircrete).

Flat-Cake Cutting Lines, HSCF & Cross-Cutter

Aircrete Flat-Cake horizontal cutting lines keep the green cake flat from pouring to cutting without tilting, enabling thin panels from 35 mm and Super Smooth surfaces. The HSCF double-oscillating wire frame and inclined Cross-Cutter cut blocks and reinforced panels. Smart Wire tracks wire tension.

  • Process: Flat-Cake horizontal cutting line
  • Modules: HSCF frame, Cross-Cutter, Smart Wire
  • Thin panels from 35 mm, tolerance up to ±1 mm
  • Parts: oscillating wires, guides, tensioners

Raw Material Dosing, Mixing & ALU SAFE Systems

Aircrete dosing and mixing plants batch silica sand or fly ash, lime, cement, gypsum, and water by digital recipe. The dedicated ALU SAFE module handles safe aluminum powder or paste dosing into the slurry mixer. Load cells, mixer blades, discharge valves, and screw seals are replaceable.

  • Raw feed: sand, fly ash, lime, cement, gypsum
  • Safety unit: ALU SAFE aluminum dosing module
  • Control: automated weigh hoppers and slurry mix
  • Parts: mixer paddles, wear liners, valves

Autoclaves, Steam Transfer & Condensate Recovery

During autoclave decompression, steam is transferred via a steam distribution unit to heat another autoclave while condensate is reused in the mixing plant. High-pressure steam curing builds the final crystalline AAC structure. Door seals, locking rings, and steam valves are serviceable.

  • Curing: pressurized saturated steam processing
  • Energy loop: steam transfer and condensate reuse
  • Hardware: autoclave door locks and steam headers
  • Parts: door gaskets, steam valves, safety switches

Moulds, Door Manipulators & Hardening Trolleys

Aircrete automated handling moves moulds, rising frames, and hardening trolleys smoothly without shocking the green cake. Automatic mould door manipulators, closed-mould oiling units, and crane grippers protect panel edges. Wheelsets, hinges, clamps, and scrapers are routine wear parts.

  • Tooling: heavy-duty moulds and curing frames
  • Automation: mould door manipulators and oilers
  • Transport: hardening trolleys, rails, traversers
  • Parts: trolley wheelsets, mould latches, seals

Aircrete In-Control Automation & Smart Wire

The Aircrete In-Control platform links batching recipes, cutting profiles, and autoclave schedules with plant MES and ERP workflows. Smart Wire uses LED status indicators to speed wire replacement and monitor wire wear in real time. PLC I/O cards, encoders, drives, and sensors are supported.

  • Platform: Aircrete In-Control plant automation
  • Cutting aid: Smart Wire LED wear monitoring
  • Data link: recipe tracking and MES/ERP bridge
  • Parts: PLC modules, encoders, servo drives

Turnkey AAC Plants & Cutting Line Upgrades

Aircrete Europe has delivered projects across 100+ factories on 6 continents. Scope covers greenfield AAC plants and retrofits replacing vertical cutters with horizontal Flat-Cake lines. Plant scans, reinforcement automation, and spare part kits extend line life.

  • Track record: 100+ factory projects on 6 continents
  • Retrofits: vertical cutter replacement by Flat-Cake
  • Panels: automated reinforcement cage handling
  • Lifecycle: Plant Scan audits and upgrade kits

Flat-Cake Horizontal Cutting & Super Smooth Panels

Unlike conventional tilt-cake systems, Aircrete Europe keeps the aerated concrete cake horizontal from pouring through cutting to autoclaving.

Eliminating the tilting step prevents layer sticking and micro-cracking in green cakes while enabling thin panels starting from 35 mm and dimensional accuracy within ±1 mm.

The High-Speed Cutting Frame (HSCF) uses double-oscillating wires to leave a Super Smooth panel finish, and the inclined Cross-Cutter minimizes edge chipping and return slurry.

Turnkey AAC Plant Engineering & Steam Recovery

Aircrete Europe supports complete turnkey AAC plants and factory modernizations across 100+ projects on 6 continents, integrating raw material dosing with ALU SAFE aluminum handling, automated mould door manipulators, and Aircrete In-Control software.

Autoclave steam transfer routes decompression steam into adjacent autoclaves while returning hot condensate to the mixing plant to reduce fuel and water demand.

Aircrete Europe / Aircrete and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Aircrete Europe / Aircrete and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.