Okay Energy Industrial HHO & Lab Sealing Equipment
On-demand oxyhydrogen generators (OH200–OH20000), rotary quartz tube vacuum sealers (OK-M), ampoule sealers (OKABFKJ), HHO engine carbon cleaners (CCS), PEM hydrogen units, and ultrapure water systems.
OH Series HHO Welding & Brazing (OH200–OH7500)
The OH200, OH1000, OH1500, and OH7500 units electrolyze water on demand without gas cylinders. A 2800 °C flame brazes motor magnet wire, transformer bars, and copper tubes. Models run on 220V or 380V up to 7200 L/h. Spare cells, torches, valves, and boards are supported.
- OH1000: 1000 L/h, 220V, 3 kW/h
- OH7500: 7200 L/h, 380V, 23 kW/h
- Pressure 2 kg/cm², flame 2800 °C
- Parts: cell stacks, torches, PCBs
HHO Cutting & Boiler Heating (OH2000–OH20000)
The OH2000, OH3000, OH5500, OH10000, and OH20000 serve steel cutting and boiler combustion. Three-phase 380V units (11–75 kW) deliver 2000 to 20,000 L/h at 2 kg/cm². HHO gas stabilizes coal, biomass, and diesel flames. Spare cell stacks, regulators, and sensors are available.
- OH3000: 3000 L/h, 380V, 11 kW/h
- OH20000: 20,000 L/h, 380V, 75 kW
- Carbon steel cutting & boiler retrofit
- Parts: cell stacks, valves, sensors
Quartz Tube & Ampoule Sealing (OK-M / OKABFKJ)
OK-M10, OK-M20, OK-M30, OK-M40, OK-M210, and OK-M320 seal 8–45 mm quartz tubes under vacuum. OKABFKJ-1, OKABFKJ-6, and OKRFH-18 handle 1–30 ml ampoules at <0.5% dosing accuracy. Units integrate KF25 vacuum joints and 3000 °C torches. Spare rotary seals, tubing, and tips are supported.
- OK-M210: 8–45 mm quartz, KF25 joint
- OKABFKJ-1: 1–30 ml, <0.5% accuracy
- Filling flow 0.007–2280 mL/min
- Parts: rotary seals, tubing, tips
HHO Carbon, DPF & Catalytic Cleaning (CCS / QM / VCS)
CCS800, CCS1000C, and CCS1500 clean engine carbon via HHO without disassembly. QM6000 (0.8 MPa) washes DPF/SCR filters, and VCS2000 treats three-way converters. Single-phase 220V systems output 1000–1500 L/h. Spare cells, hoses, pumps, and valves are supported.
- CCS1000C / CCS1500: 1000–1500 L/h
- QM6000: 0.8 MPa air, 1400 rpm
- VCS2000: 220V, 13A, <=0.4 MPa
- Parts: cell stacks, pumps, hoses
PEM High-Purity Hydrogen Generators (HG / HO)
HG-80FC, HG-90HS, and HG-60PV generators produce 99.999% pure hydrogen using PEM electrolysis. HW-900, HO-3000A, HO-M1500, and HO-M3000 support lab H2/O2 delivery and hydrogen-water systems. The HG-80FC fuel cell kit operates at 12V/24V. Spare PEM stacks, dryers, and sensors are available.
- H2 purity: 99.999% (PEM / alkaline)
- HG-80FC: 12V/24V PEMFC trainer
- HW-900 / HO-3000A / HO-M1500 / M3000
- Parts: PEM stacks, dryers, sensors
Ultrapure Water & HHO Safety Devices (OK-HP / OKFA)
OK-HP20, OK-EP40VF, and OK-MP10 deliver 20 L/h of RO and 18.25 MOhm-cm ultrapure water. Safety devices include OKFA-1, OKFA-2 electronic arrestors (0.02 s cutoff), OKFR-1, and OKSR-3 igniters. Modules integrate with OH series. Spare resin cartridges, UV lamps, and OHTORCH tips are supported.
- OK-HP20: 20 L/h, 18.25 MOhm-cm, RO
- OKFA-2: 0.02 s cutoff, 110/220V
- OKSR-3: 0–0.4 MPa flame controller
- Parts: resin packs, UV, OHTORCH
Industrial HHO Selection: Welding, Cutting & Boiler Retrofits
Okay Energy Equipment Co., Ltd. (founded in 2006 in Changsha, Hunan) manufactures on-demand water-electrolysis oxyhydrogen systems replacing bottled acetylene, propane, and LPG.
Selecting the right OH-series generator depends on required gas output (200 to 20,000 L/h), single-phase 220V or three-phase 380V power, and torch/arrestor matching (OKFA-2 electronic cutoff in 0.02 s, OKSR-3 integrated ignition).
Core industrial deployments include copper magnet wire brazing in electric motor assembly (OH1000–OH1500), transformer busbar and HVAC copper tube joining (OH3000–OH7500), carbon steel cutting, and boiler combustion optimization (OH5500–OH20000).
Laboratory Quartz Sealing, PEM Hydrogen & Automotive Service
For materials research and pharmaceutical filling lines, Okay Energy offers rotary quartz tube vacuum sealing devices (OK-M10 through OK-M320, 8–45 mm OD, KF25 port), ampoule fillers/sealers (OKABFKJ-1, OKRFH-18), 99.999% PEM hydrogen generators (HG series), and 18.25 MOhm-cm ultrapure water units (OK-HP20).
Automotive workshops utilize CCS1000C/CCS1500 HHO carbon cleaners, VCS2000 catalytic cleaners, and QM6000 DPF/SCR washers.
Okay Energy and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Okay Energy and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HSGM
- Equipment and parts for Lutz-Jesco
- Equipment and parts for Fisher
- Equipment and parts for WITTENSTEIN
Documents and sources
- Okay Energy official homepage and catalog
- Okay Energy company profile (founded 2006, Changsha)
- OH7500 HHO gas welder specifications (7200 L/h, 380V)
- OH1000 flame welding machine specs (1000 L/h, 220V)
- OH3000 HHO flame cutting machine (3000 L/h, 380V)
- OH20000 HHO boiler heating system (20000 L/h, 75 kW)
- OK-M210 rotary quartz tube vacuum sealing system (8-45 mm, KF25)
- OKABFKJ-1 ampoule filling and sealing machine (1-30 ml)
- CCS1000C HHO engine carbon cleaning system (1000 L/h)
- CCS1500 mobile engine carbon cleaning machine (1500 L/h, 4.5 kW)
- QM6000 SCR/DPF filter cleaning machine (0.8 MPa)
- VCS2000 three-way catalytic converter cleaning machine
- HG-80FC PEM hydrogen fuel cell demonstration system
- OK-HP20 laboratory ultrapure water system (20 L/h, 18.25 MOhm-cm)
- OKFA-2 electronic flashback arrestor (0.02 s cutoff)
- OKSR-3 flame regulation and electronic ignition device
- Official Chinese factory website of Hunan Okay Energy (cswkny.com)
