HSGM (Heißschneide-Geräte und -Maschinen) Thermal Cutting Equipment
Industrial heat cutters, HSG-G2S automatic rope and belt cutters, HSG-L-M / HSG-C longitudinal and cross-direction machines, Styro-Cut foam cutters, and 31 blade types from HSGM Heißschneide-Geräte und -Maschinen GmbH.
Handheld Heat Cutters HSG-0, HSG-0-Accu and HSG-0-EST
HSGM handheld cutters HSG-0 (60 W, 12/48 s duty) and HSG-0-EST (up to 200 W) reach 600 °C in 6–8 s. Cordless HSG-0-Accu (65 W, 18 V 2.0 Ah Li-Ion) weighs 0.414 kg. Units cut and seal ropes, cords, and belts, including HSG-OE and HSG-0 SF. Spare blades and switches match each model.
- HSG-0: 60 W, 230 V, 12/48 s duty
- HSG-0-Accu: 65 W, 18 V 2.0 Ah Li-Ion
- Heat-up to approx. 600 °C in 6–8 s
- Parts: blades, screws, switches, SF foot
Continuous-Operation Heat Cutters HSG-VW and HSG-3 Therm
Continuous units HSG-1-VW (160 W), HSG-03-VW (250 W), HSG-3-VW (500 W), and HSG-7-VW (700 W) run nonstop. HSG-3 Therm adds stand-by temperature control for fine fabric. Compact HSG-00 (40 W) and HSG-4-VW-MA with exhaust fan complete the line. Blade holders M and electronics match.
- HSG-1-VW / 03-VW / 3-VW: 160–500 W
- HSG-7-VW: up to 700 W for heavy ropes
- HSG-3 Therm: stand-by temperature control
- Parts: blade holders M, boards, MA fan
Automatic Rope and Belt Cutting Machines HSG-G2S
Automatic HSG-G2S and HSG-G2S-50/80/100-E machines (230 V, 800 VA, 6 bar) cut straps, tapes, and ropes to length. Systems pull material from rolls or barrels, measure length, and count pieces. Directly heated blades seal edges in one step. Feed rollers, cylinders, and sensors fit.
- Supply 230 V 50/60 Hz, power 800 VA
- Compressed air 6 bar, roll pull-off
- Built-in length measure and piece counter
- Parts: rollers, pneumatic parts, sensors
Stand-Mounted Blade Cutters HSG-GMN-V-E-K and HSG-GMN-V-E/N
Stand-mounted cutters HSG-GMN-V-E-K and HSG-GMN-V-E/N (800 VA, 230 V, 6 bar) cut straps, tapes, and ropes to length. Quick-change straight blades, a protective cap, and a separate transformer simplify setup. Model V-E/N adds blower suction and a foot switch. Blades and switches match.
- Models HSG-GMN-V-E-K and HSG-GMN-V-E/N
- 800 VA, 230 V 50/60 Hz, 6 bar air
- Quick-change blade system and safety cap
- Parts: blades, blower suction, foot switch
Longitudinal and Cross-Direction Cutters HSG-L-M, HSG-C and HSG-Q-I-WB
Longitudinal HSG-L-M runs roll-to-roll across 1.2–3.0 m widths on a rubber roller and ceramic tube base. Cross-cutter HSG-C (up to 2.2 m, 6 bar, ~180 VA per 10 cm) cuts PP silo-bag fabric. HSG-Q-I-WB (X) M spans 0.5–2.5 m with a 3 s cycle. Rollers, ceramics, and blades match.
- HSG-L-M: roll-to-roll widths 1.2–3.0 m
- HSG-C: up to 2.2 m, 6 bar, ~180 VA / 10 cm
- HSG-Q-I-WB (X) M: 0.5–2.5 m, 3 s cycle
- Parts: ceramic tubes, conveyor rolls, blades
Interchangeable Cutting Blades and Profile Tips HSGM
HSGM produces 31 blade types matched to each unit power rating and material. Universal Type R cuts ropes up to 15 mm, R-50 up to 35 mm, R-1 up to 50 mm, and G-90 belts up to 60 mm wide. HS-S, HS-SG, and HSO-N fit fabrics, while N-1/N-2 cut grooves. Profile blades RU 3–12 mm match.
- 31 blade types for cutting, sealing, grooving
- Type R <= 15 mm, R-50 <= 35 mm, R-1 <= 50 mm
- HS-S, HS-SG, HSO-N for sails and awnings
- Shape blades RU 3–12 mm, HR, RE, OV, WI
Styrofoam Cutters Styro-Cut and Table Units ETC / Profi
The HSGM Styro-Cut range covers handheld foam cutters 120, 140, and 230 plus groove-cutter HSG-OE (90 W). Workshop units include G1-VW and table cutters ETC-250, ETC-250-S, and Styro-Visko-S. Transformers SFS and SFS/E drive hot-wire cutters Profi-10020/13020. Blades Type C and N fit.
- Handheld Styro-Cut 120 / 140 / 230 & HSG-OE
- Table units ETC-250 / 250-S, Styro-Visko-S
- Hot-wire Profi-10020 / 13020 and SFS units
- Blades Type C and groove N-1 / N-2 <= 20 mm
Shape-Cutting Installations HSG-FB, KSM Sealers and Engel Guns
HSGM builds HSG-FB and HSG-Airbag thermal shape-cutting installations for precision contours. Edge-sealing devices HSG-KSM-1 and HSG-KSM-2 finish synthetic borders reliably. The Engel soldering gun line covers 100s, 60s, and cordless B50 set. Spare parts lists and tips match each unit.
- Shape-cutting systems HSG-FB & HSG-Airbag
- Edge-sealing devices HSG-KSM-1 and HSG-KSM-2
- Engel soldering guns 100s, 60s, and B50 set
- Parts: HSG-KSM-2 and Engel 100s spare lists
Manufacturer Profile: HSGM Heißschneide-Geräte und -Maschinen GmbH
Founded in 1977 in Walluf am Rhein and operating from a 2,000 m² facility in Geisenheim, Germany, HSGM Heißschneide-Geräte und -Maschinen GmbH builds precision thermal cutting equipment with 30+ specialists and partners in more than 25 countries.
Directly transformer-heated blades reach approx. 600 °C within 6–8 seconds without heating cartridges, melting and sealing thermoplastic warp and weft threads in a single cut to prevent fraying.
Selecting Cutters, Automatic Machines and Matching Blades
Intermittent handheld units HSG-0 (60 W, 12/48 s), cordless HSG-0-Accu (18 V 2.0 Ah Li-Ion), and microprocessor-controlled HSG-0-EST suit workshop and field work, while continuous-operation HSG-1-VW through HSG-7-VW (160–700 W) handle nonstop benches.
For high-output lines, HSG-G2S automatic rope and belt cutters (800 VA, 6 bar), HSG-GMN blade-stands, longitudinal HSG-L-M (1.2–3.0 m), and cross-direction HSG-C / HSG-Q-I-WB (up to 2.5 m) pair with 31 specialized blade profiles and Styro-Cut foam systems.
HSGM and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of HSGM and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Leybold
- Equipment and parts for Marpol
- Equipment and parts for Metronelec
- Equipment and parts for LESSAR
Documents and sources
- HSGM — manufacturer homepage and company profile
- HSGM — company history in Geisenheim since 1977
- HSGM — overview of 10 thermal cutting product categories
- HSGM — handheld and continuous-operation heat cutters
- HSGM — interchangeable cutting blades catalog (31 types)
- HSGM — automatic rope and belt cutting machines HSG-G2S
- HSGM — blade-stands HSG-GMN-V-E-K and HSG-GMN-V-E/N
- HSGM — longitudinal hot cutting machine HSG-L-M
- HSGM — cross-direction hot cutting machines HSG-C and HSG-Q-I-WB (X) M
- HSGM — data sheets, operating instructions and spare parts lists
