Tesmec Trenchers and Stringing Equipment
Tesmec equipment (Italy): chainsaw, bucket wheel and rock saw trenchers, mechanical laying machines, pullers, tensioners and puller-tensioners for stringing.
Chainsaw Trenchers 1150 EVO, 1475 XL EVO, 1675 EVO
Large Tesmec chainsaw trenchers for pipelines: the 1150 EVO in the 60 metric ton class, the 1475 XL EVO in the 100 metric ton class and the 1675 EVO with a 567 kW engine and a double or triple chain boom. EVO technology gives higher chain pull at lower chain speed.
- 1150 EVO: depth 183–366 cm
- 1475 XL EVO: depth 244–488 cm
- 1675 EVO: depth 244–732 cm
- 1675 EVO: width 76–183 cm
Chainsaw Trenchers 950R, 975 EVO, 985, M5
The 950R is built for fiber optic, power cable, water and gas pipe work, with an offset digging chain and tilting tracks. The 975 EVO takes an automatic cable laying system on request, the 985 has a center mounted truck conveyor. The M5 with a torque converter works in abrasive hard rock.
- 950R: depth 91–183 cm
- 975 EVO: depth 122–306 cm
- 985: width 30–71 cm
- M5: depth 183–610 cm
Bucket Wheel Trencher 1075
The Tesmec 1075 bucket wheel trencher is built for pipelines, agricultural work and utilities in dirt and light rocky soils. Its buckets take conical or spade tools to match the ground. It digs up to 213 cm deep in light rocky soils and up to 244 cm in dirt.
- 1075: depth up to 244 cm
- 1075: width 51–102 cm
- 1075: engine up to 280 kW
- Tools: conical or spade
Rock Saw Trenchers 300, 950R T1000, Sidecut
Tesmec rock saw trenchers for cable ducts and fiber optics in towns. The compact 300 is remotely controlled and cuts up to 65 cm deep, the 950R T1000 cuts 50 to 100 cm with a super offset back-end. The Marais line Sidecut SC3C (crawler) and SC4P (wheeled) cut microtrenches on sidewalks.
- 300: depth 0–65 cm
- 950R T1000: width 10–20 cm
- Sidecut SC3C: width 2.5–8 cm
- Sidecut SC4P: depth 0–35 cm
Marais Line Machines: GD2, ST2, Cleanfast
The Marais line GD2 and ST2 cut the trench and lay cables and ducts at the same time: the GD2 offsets its tool 800 mm to the left and right outside the machine, the ST2 has a 5 axis boom on the trenching wheel. Cleanfast from the same line cuts up to 600 mm deep and vacuums the spoil.
- GD2: tool offset 800 mm
- ST2: 5 axis wheel boom
- Cleanfast: width 2.5–13 cm
- Cleanfast: cutting radius 9 m
Digital Pullers PL1250–PL1950
Tesmec pullers draw the conductor in overhead line construction. The digital range shows models from 50 kN on the PL1250 to 280 kN on the PL1950, with 400 to 1000 mm bull wheels. Options include a preheating device for extra cold weather, a road transport package and remote diagnosis.
- PL1250: pull 50 kN
- PL1450: pull 100 kN
- PL1700: pull 160 kN
- PL1950: pull 280 kN
Tensioners and Puller-Tensioners TN, PT
Tensioners hold conductor tension during stringing, PT puller-tensioners work in both modes. The digital TN1750 has a 1500 mm bull wheel with 24 grooves, the double PT2800 gives 2×100 or 1×200 kN. The mechanical Essential range with limited electronics includes the 140 kN FRS615.
- TN1750: 180 kN
- PT1450: 100 kN
- PT2800: 2×100 kN or 1×200 kN
- Essential range: FRS615, 140 kN
Electric and Underground Machines PE, UG, CP1150
Battery PE pullers for urban and tunneling projects: max pull is 30 kN on the PE1151, 50 kN on the PE1250, 70 kN on the PE1350; max speed of the PE1250 and PE1350 is 70 m/min. For underground cables: UG1650 and UG1800 winches and the CP1150 pusher, up to 25 kN, for 50–200 mm cable.
- PE1151: battery 48 V
- PE1250: battery 350 V
- UG1800: pull up to 220 kN
- UG1650: pull up to 150 kN
Selecting Tesmec Equipment by Task
Pipeline trenches in rock are dug by the 1150 EVO, 1475 XL EVO and 1675 EVO chainsaw trenchers; the 1675 EVO digs up to 732 cm deep and up to 183 cm wide.
For cable, fiber, water and gas lines there are the 950R, 975 EVO and 985 chainsaw trenchers, for abrasive hard rock the M5 with a torque converter, and for dirt and light rocky soils the 1075 bucket wheel trencher.
Narrow trenches for cable and fiber in towns are cut by the 300 and 950R T1000 rock saw trenchers and the Marais line Sidecut machines. The GD2 and ST2 cut the trench and lay cables and ducts at the same time, and Cleanfast vacuums the spoil while cutting.
Stringing Equipment
Since 1960 Tesmec has built machinery for stringing high voltage lines. PL pullers draw the conductor, TN tensioners hold its tension, PT puller-tensioners work in both modes.
Next to the digital machines there are the mechanical Essential range with limited electronics and battery powered PE machines for urban and tunneling projects.
For underground cable installation Tesmec shows the UG winches and the CP1150 cable pusher. Accessories include stringing blocks, pivoting array blocks (68 or 95 mm groove, as on a standard pulley), ropes, swivel joints and drum elevators; the self-propelled RC320 carrier lays three cables at once.
Tesmec Company
Tesmec S.p.A. is the parent company of the group with its registered office in Milan; the headquarters and a plant are in Grassobbio, Bergamo. The company was founded in 1951 as CRF (Officina Meccanica di Precisione), and its shares have traded on the Italian Stock Exchange since 2010.
In 2015 Tesmec signed the contract to acquire the French company Marais Technologies SAS, and Marais line machines are part of the trencher range. The group has 5 production plants in Italy, 1 in the USA and 1 in France; the Sirone plant does precision machining of components.
Tesmec and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tesmec and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Ditch Witch
- Equipment and parts for Manitowoc
- Equipment and parts for Huddig
- Equipment and parts for Hexatronic
- Equipment and parts for McLanahan
Documents and sources
- About Tesmec — history
- Tesmec S.p.A. — Milan and Grassobbio
- Tesmec Group — sectors and plants
- Sirone plant — precision machining
- 1150 EVO chainsaw trencher — specifications
- 1475 XL EVO chainsaw trencher — specifications
- 1675 EVO chainsaw trencher — specifications
- 950R chainsaw trencher — specifications
- 975 EVO chainsaw trencher — specifications
- 985 chainsaw trencher — specifications
- M5 chainsaw trencher — specifications
- Chainsaw trenchers — overview and Re.M monitoring
- 1075 bucket wheel trencher — specifications
- 300 rock saw trencher — specifications
- 950R T1000 rock saw trencher — specifications
- Sidecut SC3C — specifications
- Sidecut SC4P — specifications
- GD2 — mechanical laying
- ST2 — mechanical laying
- Cleanfast — trenching with vacuum
- Trencher spare parts — Inter-Parts portal
- Trencher after sales support — apps and contacts
- Digital stringing machines — model tables
- Essential machines — model table
- Full electric PE machines — specifications
- Underground machines — UG and CP1150
- Teo — machine monitoring
- Reels, ropes and joints — description
- Stringing blocks and pivoting array blocks — description
- Drum elevators and RC320 carrier — description
