Jingjin Equipment Filter Presses, Plates and Filter Cloth
Jingjin Equipment (China): chamber and membrane filter presses, filter plates, filter cloth, plunger feed pumps, DLN screw presses and filter press auxiliary equipment.
Chamber and Membrane Filter Presses
Jingjin builds chamber, membrane and automatic filter presses for dewatering sludge and slurries. A chamber press applies pressure to the slurry hydraulically or mechanically; in a membrane press, elastic membranes on both sides of the plate squeeze the cake. Frames are Q345B steel.
- Frame: Q345B steel
- Membranes: PP, NBR, EPDM, TPE
- PVDF membranes: on request
- Automatic cake discharge: 1.6 MPa filtration
Filter Press Plates
Jingjin makes membrane, recessed, CGR and round plates from polypropylene, TPE elastomer and fiber glass. After CNC machining, plate flatness is below 25 µm. PP plates take a feed pressure of up to 1.6 MPa; high-pressure PP membrane plates inflate at up to 4.0 MPa.
- Flatness: below 25 µm
- PP plate feed: up to 1.6 MPa
- Membrane inflation: up to 4.0 MPa
- Sizes in the table: 500×500–2000×2000 mm
Filter Press Cloth
Jingjin brought a complete filter cloth production line from Germany. Cloth is woven at constant temperature and humidity, with an air permeability error below 1% per square meter. Cake falls off monofilament cloth by itself. Fibers are polypropylene, polyester and polyamide.
- Weaving line: from Germany
- Air permeability error: below 1%
- Fibers: PP, PET, PA
- Monofilament: self-releasing cake
Plunger Feed Pumps
Jingjin plunger pumps feed slurry into the filter press. The high-pressure pump has an alumina ceramic plunger with 0.4 µm surface roughness, 4–8 m self-priming and a 0–2.0 MPa feed pressure; 2.0–3.5 MPa is specified when ordering. The energy-saving pump has 0–2.5 MPa.
- Plunger: ceramic, 0.4 µm
- Self-priming: 4–8 m
- High-pressure pump: 0–2.0 MPa
- Control link: MODBUS or Ethernet
DLN Multi-Disk Screw Presses
Jingjin DLN300, DLN350 and DLN400 screw presses dewater and thicken sludge with up to 99.5% water content. Moving rings clean the filter slit during operation. Dry solids capacity runs from 60–120 kg/h on the DLN301 to 800–1400 kg/h on the DLN404. Material is SUS304 or SUS316.
- Feed water content: up to 99.5%
- DLN404: 800–1400 kg/h dry solids
- Thickening: 0.2–2% sludge
- Material: SUS304/SUS316 steel
Filter Press Auxiliary Equipment
For slurry preparation and cake handling Jingjin makes dosing machines, agitators, tanks, thickeners, cake breakers, belt and screw conveyors. Thickeners raise solids concentration ahead of the press by gravity separation. A closed low-temperature cake dryer came out in 2019.
- Dosing: automatic machines
- Thickening: gravity separation
- Cake: breakers and conveyors
- Cake drying: low-temperature dryer
Selecting Jingjin Equipment by Task
The Jingjin Equipment range forms a dewatering chain: dosing machines and agitators prepare the slurry, a thickener raises its solids concentration, a plunger pump feeds it into the filter press, and cake breakers and conveyors remove the cake.
The main products are filter presses, filter plates, filter cloth and auxiliary equipment.
A chamber press dewaters the cake by feed pressure; in a membrane press the membrane inflates after feeding and squeezes the cake again. For sludge with up to 99.5% water content there are DLN multi-disk screw presses.
Plates and Filter Cloth: What to Check
A PP plate takes a feed pressure of up to 1.6 MPa, and high-pressure PP membrane plates inflate at up to 4.0 MPa. The recessed PP plate table lists sizes from 500×500 to 2000×2000 mm; a 2000×2000 plate has a filtration area of 6.70 m², a 500×500 plate 0.32 m².
Membranes are PP, NBR, EPDM and TPE, with PVDF on request. Cloth is chosen by fiber (polypropylene, polyester, polyamide) and weave: cake releases from monofilament cloth by itself.
Jingjin Equipment Company
Jingjin Equipment Inc. was founded in 1988 and is located in the Dezhou Economic Development Zone, Shandong, China. Since October 2019 the company has been listed in Shanghai (code 603279); its former short listing name was Jingjin Environmental Protection.
Jingjin is the primary drafter of China national standards for filter presses and filter plates. Its team includes more than 500 sales and technical service staff, and its products have been exported to 123 countries. The manufacturer itself supports installation, commissioning and maintenance.
Jingjin Equipment and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Jingjin Equipment and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for McLanahan
- Equipment and parts for HAUS
- Equipment and parts for Minyu
- Equipment and parts for Weir Pumps
Documents and sources
- About us — founding and listing code
- Company history — milestones
- Contact us — Dezhou address
- Home page — plates and filter cloth
- Chamber filter press — design
- Membrane filter press — membranes
- Automatic cake discharge press — parameters
- Plate catalog — types and materials
- Model 1500 membrane plate — materials
- Model 3200 plate — recessed plate table
- Ultrahigh pressure membrane plate — inflation
- Filter cloth catalog — fibers and weaves
- Jingjin521 cloth — weaving
- High-pressure plunger feed pump — parameters
- Energy-saving plunger pump — pressure
- DLN screw press — series table
- Auxiliary equipment — catalog
