Unozawa-Gumi Iron Works / UNOZAWA Dry Vacuum Pumps & Rotary Blowers

Model selection and export sourcing for Unozawa-Gumi Iron Works (UNOZAWA) multi-stage Roots dry vacuum pumps (TRV, TRM, KTS, TS, PFA/SCS), three-lobe rotary blowers (ARJ, ARK), and water-ring systems (SRH, SRU/SRM, TAH/TAK).

Chemical Dry Vacuum Pumps TRV & TRM

Multi-stage Roots dry vacuum pumps by Unozawa-Gumi Iron Works (UNOZAWA) operate without oil or water in gas-contact zones. Vertical TRV and horizontal TRM handle condensable mist continuously from atmospheric pressure for distillation and solvent recovery. Indirect water cooling protects coolant.

  • Lineup: TRV vertical and TRM horizontal series
  • Continuous pumping from atmospheric to ultimate pressure
  • Mist discharge, solvent recovery, indirect cooling
  • Components: rotors, shaft seals, silencers, Ex motors

Corrosion-Resistant TRV-PFA & TRM-SCS

Chemical-duty models from Unozawa-Gumi Iron Works (UNOZAWA) handle strong acid, alkali, and organic solvent vapors. Vertical Down-Flow TRV applies a 200 μm antistatic PFA fluororesin coating on wetted surfaces. Horizontal TRM-SCS builds body, piping, intercooler, and drain tank in stainless steel.

  • TRV-PFA: 200 μm antistatic PFA wetted coating
  • TRM-SCS: SCS stainless body, piping, cooler, drain tank
  • Combinable with mechanical booster for high pumping speed
  • Parts: coated housings, SCS intercoolers, seals, drain tanks

Clean-Process Dry Pumps KTS & TS

Clean dry vacuum pumps by Unozawa-Gumi Iron Works (UNOZAWA) prevent oil back-diffusion and particle generation. Air-cooled aluminum-alloy KTS uses flush-air purging for water vapor at 5 to 40 degrees C. Water-cooled TS adds back-flow cooling and a canned motor with leak rate below E10-6 Pa·m3/sec.

  • KTS: air-cooled aluminum alloy body, 5 to 40 degrees C
  • TS: water-cooled eco dry pump, <= E10-6 Pa·m3/sec leak rate
  • Hermetic canned motor with zero exposed external shaft
  • Spares: canned motors, silencers, purge valves, rotors

Three-Lobe Rotary Blowers ARJ

Multi-purpose positive-displacement ARJ blowers and vacuum pumps from Unozawa-Gumi Iron Works (UNOZAWA) deliver constant flow against pressure swings. Winner of the FY 2016 JSME Award, ARJ supports process and high-temperature gases with tailored shaft seals, alloys, and high-pressure housings.

  • Oil-free three-lobe rotor positive-displacement design
  • FY 2016 JSME Excellent Product Award for special gases
  • Custom shaft seals, special alloys, high-pressure bodies
  • Spares: 3-lobe rotors, shaft seals, bearings, covers

Compact Low-Noise Blowers ARK

Standardized ARK three-lobe rotary blowers and vacuum pumps by Unozawa-Gumi Iron Works (UNOZAWA) serve wastewater aeration, backwash, cooling air, and powder conveying. Compact housings and three-lobe rotors minimize noise, vibration, and pulsation for clean air exhaust.

  • Compact standardized air-purpose 3-lobe Roots series
  • Low noise, low vibration, oil-free clean air exhaust
  • Duties: wastewater aeration, backwash, powder conveying
  • Spares: rotor sets, seals, intake/exhaust silencers, mounts

Water-Ring Pumps SRH, SRU/SRM & TAH/TAK

Water-ring vacuum pumps by Unozawa-Gumi Iron Works (UNOZAWA) handle gas and water across chemical, food, paper, and medical plants. Industrial SRH and circulating SRU/SRM continue running during water interruption. TAH and TAK units pair water-ring pumps with boosters.

  • SRH: general-industry water-ring pump with special alloys
  • SRU/SRM: medical circulating tank pump (>50 years service)
  • TAH & TAK: high-vacuum mechanical-booster assemblies
  • Spares: impellers, shaft seals, circulation tanks, boosters

Selecting Unozawa-Gumi Iron Works / UNOZAWA Dry Pumps for Chemical & Clean Duties

For chemical vacuum distillation, drying, and solvent recovery with condensable vapors, Unozawa-Gumi Iron Works (UNOZAWA) builds vertical top-down TRV and horizontal TRM multi-stage Roots dry pumps capable of continuous operation from atmospheric to ultimate pressure with indirect cooling and Ex-proof motor options.

In strong acid or alkali streams, corrosion-resistant TRV adds a 200 μm antistatic PFA fluororesin lining, while TRM-SCS uses stainless steel across the body, piping, intercooler, and drain tank.

For non-corrosive clean vacuum in deposition, load-locks, and helium leak detection, lightweight aluminum-alloy KTS pumps run air-cooled at 5 to 40 degrees C with flush-air water-vapor purging, while water-cooled TS pumps pair back-flow cooling with a hermetic canned motor rated at E10-6 Pa·m3/sec or less.

Matching Three-Lobe Blowers ARJ/ARK & Water-Ring Systems SRH/SRU/TAH

UNOZAWA ARJ positive-displacement three-lobe rotary blowers and vacuum pumps—recipient of the FY 2016 JSME Excellent Product Award—maintain constant flow against discharge pressure changes and accept custom shaft seals, high housing pressures, and special process gases.

Standardized ARK units target compact, low-noise wastewater aeration, backwash, and powder pneumatic conveying.

Where gas and liquid water must be suctioned together, SRH general-industry water-ring pumps and SRU/SRM tank-circulating medical pumps provide continuous duty even during water supply interruption, while TAH and TAK systems combine a water-ring pump with a mechanical booster.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.