Habermann Aurum Pumpen (Habermann Pumpen) Slurry Pumps & Valves
Engineering selection and delivery of Habermann Aurum Pumpen (Habermann Pumpen / Arthur Habermann) slurry, chemical, water, and submersible pumps, SLK slurry knife valves, ADST dredgers, and replacement wear parts.
HPK & HPK CeramCarbide Slurry Pumps
Centrifugal slurry pumps of the HPK series feature a replaceable elastic lining made of APFlex polyurethane or rubber. They handle abrasive slurries up to 5–10 mm across pH 0–14 and offer CeramCarbide coating. Impellers, liners, and wear plates fit service.
- Flow up to 4600 m3/h
- Single-stage head up to 70 m
- DN 32–500, PN 10 bar, 130 °C
- Medium pH 0–14, solids to 5–10 mm
NPK & NPW Metallic Slurry Pumps
NPK and NPW metallic pumps use HBN 440, HBN 450, and HBN 480 wear alloys up to 650 HB. They transport coarse abrasive slurries with solids up to 100 mm in mining and coal plants. Tie-rods allow gap adjustment. Wear plates, impellers, and volutes fit service.
- NPK: up to 4600 m3/h, 95 m head
- NPK: 25 bar, 160 °C, to 650 HB
- NPW: up to 4600 m3/h, 70 m, 6 bar
- Solids up to 100 mm, pH 3–14
KB / KBK / KBKT Tunneling & Dredging Pumps
Compact KB, KBK, KBH, KBKM, and KBKT pumps feature extra-thick walls for micro-tunneling AVN machines and gravel extraction. They resist heavy impact from coarse solids. Closed impellers pair with HGD mechanical seals. Seals, shafts, and wear plates fit service.
- Flow up to 5000 m3/h
- Single-stage head up to 85 m
- DN 100–500, pressure 16 bar
- Suction 8 m, up to 2000 rpm
RPL Armored & Series N Sump Pumps
RPL armored pumps handle slurries up to 1.5 density and 125 m head with back relief vanes. Seal-less Series N sump pumps use a cantilever shaft and feed tank up to 2.5 m3 for foaming media. Hydraulics match HPK and NPK parts. Impellers, shafts, and liners fit service.
- RPL: up to 3000 m3/h, 125 m head
- RPL: DN 32–400, PN 16 bar, 90 °C
- Series N: seal-less cantilever shaft
- Tank up to 2.5 m3, density 1.5
Vertical Slurry Pumps V1/V2 & V300–V340
Vertical V1 (up to 2500 mm) and two-piece V2 (up to 5000 mm) pumps serve pits using HPK, NPK, NPW, and KB hydraulics. Seal-less V300–V340 pumps handle foaming flotation slurries down to 5 m at pH 0–14. Bearings, shafts, and impellers fit service.
- V1/V2: up to 2500 m3/h, 60 m head
- V1/V2: shaft up to 2500 / 5000 mm
- V300–V340: up to 1400 m3/h, 50 m
- Diving depth to 5 m, pH 0–14
Heracles, Challenger & Elevaro Submersible Pumps
Heracles (up to 600 m3/h, 30 m depth) and Challenger CRM/CRP (1650 m3/h, 56 m) pumps run on electric or hydraulic drives. Elevaro agitator pumps handle 30% slurry via SiC seals; APNO and Domo reach 45 kW. Impellers, SiC seals, and cables fit service.
- Heracles: 600 m3/h, 52 m, 30 m depth
- Challenger: 1650 m3/h, 56 m, 1470 rpm
- Elevaro: 390 m3/h, 30 m, 30% slurry
- Drainage APNO / Domo up to 45 kW
HPN Chemical & APW Industrial Water Pumps
EN ISO 2858 HPN chemical pumps (up to 400 m3/h) use APFlex, UHMW-PE, PP, and PTFE wet linings. Double-volute split-body APWD water pumps reach 20000 m3/h in iron, bronze, stainless, or duplex alloys alongside APWE and APWM. Shaft sleeves, bearings, and seals fit service.
- HPN (EN ISO 2858): up to 400 m3/h
- HPN linings: APFlex, PTFE, PP, PU
- APWD double-volute: up to 20000 m3/h
- Alloys: bronze, stainless, duplex
SLK Slurry Valves, Fittings & ADST Dredgers
SLK slurry knife valves handle >30% solids at 16 bar with tungsten-carbide knife coatings. Valve lines cover THB/FLD ball valves (PN 10–400, 220 °C), DE butterfly, and TE gate valves. ADST-200E–600E dredgers pump 720 m3/h at 30 m depth. Blades, seats, and seals fit service.
- SLK knife valves: >30% solids, 16 bar
- Ball valves THB/FLD: PN 10–400, 220 °C
- DE butterfly & TE gate valves
- ADST dredgers: up to 720 m3/h, 30 m
Industrial Applications and Wet-End Materials
Habermann Aurum Pumpen (Habermann Pumpen / Arthur Habermann) equipment operates in mining, mineral and coal processing, metallurgy, chemical production, power plants, sugar mills, and micro-tunneling.
For fine abrasive slurries (particles up to 5–10 mm) and acidic or alkaline media across pH 0–14, APFlex polyurethane, rubber, or CeramCarbide linings are selected. For coarse solids up to 100 mm, HBN 440, HBN 450, and HBN 480 wear alloys up to 650 HB provide extended hydraulic life.
Engineering Sizing Parameters and Valve Integration
Accurate equipment selection across HPK, NPK, NPW, KB, vertical V-series, submersible Heracles/Elevaro, HPN chemical, and APW water pumps requires operating flow (m3/h), total delivery head (m), slurry density and concentration (%), maximum grain size, pH value, and fluid temperature.
Complete process skids and ADST dredgers can be paired with SLK tungsten-carbide slurry knife valves (>30% solids, 16 bar), THB/WBV/FLD ball valves (PN 10–400), DE double-eccentric butterfly valves, and TE gate valves.
Habermann Aurum Pumpen and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Habermann Aurum Pumpen and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Josef Emmerich Pumpenfabrik / JE-Pumpen
- Equipment and parts for Zeilfelder Pumpen / ASM Dimatec
- Equipment and parts for Hangzhou Xinglong Pump
- Equipment and parts for Apex Hydraulics
Documents and sources
- About Habermann Aurum Pumpen — company history since 1927
- Habermann Aurum Pumpen products — pumps, SLK valves, ADST dredgers
- Series HPK — slurry pumps with elastic APFlex lining
- Series NPK — heavy-duty wear-resistant slurry pumps
- Series NPW — metallic pumps for industrial slurries
- Series KB / KBK / KBKT — dredging and tunneling slurry pumps
- RPL Series — armored pumps for medium and heavy duty
- Series N — seal-less armoured sump pumps
- Series V1 / V2 — vertical centrifugal slurry pumps with long shaft
- Series V300 / V320 / V340 — vertical wet-installation pumps
- Heracles — heavy-duty submersible slurry pumps
- Challenger CRM/CRP — submersible slurry pumps
- Elevaro — high-performance agitator slurry pumps
- HPN — standardized EN ISO 2858 chemical pump
- APWD — double-volute split-case water pumps
- Ball valves THB, WBV, MWB, FLD, FLT — PN 10–400, up to 220 °C
- Habermann Aurum Pumpen spare parts service
- Habermann Aurum Pumpen repair and modernization
