Halberg Maschinenbau / SIHI-HALBERG Industrial Pumps & Spare Parts

Industrial multistage centrifugal, self-priming side-channel, EN 733 process, and liquid ring pumps and compressors by Halberg Maschinenbau / SIHI-HALBERG (Flowserve SIHI), plus matched replacement assemblies.

SIHI HEGA Horizontal Multistage Pumps (Halberg)

SIHI HEGA horizontal multistage pumps deliver flows up to 190 m3/h, heads up to 390 m, housing pressures up to 40 bar, and temperatures up to 180 °C across sizes 25 to 80. They serve boiler feed and heating plants. Spares cover impellers, wear rings, and shaft seals.

  • Flow up to 190 m3/h, head up to 390 m
  • Pressure to 40 bar, temperature to 180 °C
  • Nominal sizes 25, 32, 40, 50, 65, 80
  • Stuffing box or mechanical shaft seal

SIHI MSL / MSM Modular Multistage Pumps

Modular horizontal multistage pumps SIHI MSL and MSM built to ISO 5199 and EN 25199 achieve flows up to 450 m3/h, heads up to 630 m, pressures up to 63 bar, and temperatures from -10 °C to 180 °C. Spares cover impellers, guide wheels, balancing drums, and bearings.

  • Flow up to 450 m3/h, head up to 630 m
  • Pressure up to 63 bar, -10 °C to 180 °C
  • Sizes from 32 mm to 150 mm, ISO 5199
  • Self-aligning sleeve or ball bearings

SIHI MSC / MSH High-Pressure Multistage Pumps

Single-housing multistage pumps SIHI MSC and MSH deliver up to 250 m3/h across 50 to 100 mm sizes. MSC reaches 1000 m head at 100 bar, while MSH achieves 1600 m at 160 bar using a balance drum and disc. Spares include impellers, balance drums, wear rings, and seals.

  • Flow up to 250 m3/h, sizes 50 to 100 mm
  • MSC up to 1000 m head and 100 bar
  • MSH up to 1600 m head and 160 bar
  • Combined balance drum and disc design

SIHI CEH / AEH Self-Priming Side-Channel Pumps

SIHI CEH and AEH side-channel pumps per EN 734 deliver up to 35 m3/h and 354 m head at up to 1800 rpm, 40 bar, and 180 °C. Across up to 8 stages, they handle 50% entrained gas and NPSH below 0.5 m. Spares cover open vane impellers, stage discs, and seals.

  • Flow up to 35 m3/h, head up to 354 m
  • Up to 40 bar, 180 °C, 8 stages max
  • Handles up to 50% vapor, NPSH below 0.5 m
  • Packing, mechanical seal, or magnetic drive

SIHI Z-Line Process Pumps (ZLND, ZHND, ZTND)

EN 733 volute pumps span general process ZLND (up to 1800 m3/h, 140 m, 170 °C), hot water ZHND to 230 °C (PN 40), and thermal oil ZTND to 350 °C. Back-pull-out rotors ease overhaul. Maintenance kits 20230916-20230921 fit BB25, BB35, and BB45 bearings and seals.

  • ZLND up to 1800 m3/h, 140 m, 170 °C
  • ZHND hot water 230 °C; ZTND oil 350 °C
  • Back-pull-out rotor removal design
  • Kits 20230916-20230921 (BB25/35/45)

SIHI KPH Compressors & LPH Liquid Ring Vacuum Pumps

API 681 and NACE MR0175 liquid ring compressors SIHI KPH handle up to 3400 m3/h and 12 barg. ATEX vacuum pumps LPH/LPHX reach 10,350 m3/h and 33 mbara across DN40 to DN250. Replacement parts cover metallic impellers, port plates, O-ring seals, shafts, and bearings.

  • KPH: up to 3400 m3/h, 12 barg, API 681
  • LPH: up to 10,350 m3/h, 33 mbara vacuum
  • Sizes DN40 to DN250, ATEX & NACE MR0175
  • Oil-free isothermal gas and vapor compression

Pump Selection for Halberg Maschinenbau / SIHI-HALBERG Installations

Founded in Ludwigshafen and integrated into SIHI in 1971 and Flowserve in 2015, Halberg Maschinenbau / SIHI-HALBERG pump designs cover multistage boiler feed and booster units (HEGA, MSL/MSM, MSC, MSH), self-priming side-channel pumps (CEH, AEH), standardized EN 733 process pumps (Z-Line), and liquid ring vacuum pumps and compressors (LPH, KPH).

Equipment selection matches duty flow and total head, NPSH margin (down to below 0.5 m on CEH combined stages), fluid temperature (up to 230 °C on ZHND hot-water and 350 °C on ZTND thermal-oil designs), housing pressure class, and shaft sealing requirements.

Spare Parts Identification & Heritage Support

To specify replacement impellers, diffusers, balancing drums, shafts, bearings, wear rings, or mechanical seals for installed Halberg / SIHI-HALBERG equipment, match the nameplate model code, stage count, material execution, and serial number.

Standardized OEM maintenance kits such as ZLND 20230916-20230921 bundle bearings, support washers, gaskets, lip or V-seals, distance rings, impeller nuts, throwers, keys, and lockwashers for oil- or grease-lubricated BB25, BB35, and BB45 bearing brackets.

Halberg Maschinenbau / SIHI-HALBERG and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Halberg Maschinenbau / SIHI-HALBERG and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.