Zeilfelder Pumpen (ASM Dimatec) Positive Displacement Pumps
German-engineered external gear (ZK, ZH/ZV, LZ, PQ), internal gear (ZI, HP/MHP), and rotary lobe pumps (KE/KD, KS/KDS, KM, KLR) up to 120 bar, +450 °C, and 3,400,000 mPas, plus 2K dosing systems and HERMETIC replacements.
ZK and ZH/ZV External Gear Pumps (Blue Series)
Zeilfelder Pumpen ZK (solid-milled body) and ZH/ZV Blue Series external gear pumps deliver low-pulsation flow for clean self-lubricating media at differential pressures up to 120 bar. Temperatures reach +450 °C at up to 3000 rpm. Service items include gears, shafts, and seals.
- ZK: 0.4–300 l/min, up to 120 bar
- ZH/ZV: 1–4350 l/min, up to 3000 rpm
- Viscosity to 150,000 mPas, -60..+450 °C
- Parts: gears, shafts, magnetic couplings
LZ Chemical and PQ Standard External Gear Pumps
Milled LZ Series pumps (former HERMETIC-Lederle line) handle chemical fluids up to 40 bar and 640 l/min at 1480 rpm. PQ Green Series pumps cover standard duties up to 20 bar and 4120 l/min in grey iron or steel. Wearable parts include gears, bearings, and shaft seals.
- LZ: 40 bar, 0–640 l/min, up to 1480 rpm
- PQ: 20 bar, 10–4120 l/min, -20..+250 °C
- Bodies in grey iron or stainless steel
- Parts: gears, bushings, lip & mech. seals
ZI Green and HP/MHP Internal Gear Pumps
Single-shaft ZI Green internal gear pumps with crescent dividers operate up to 14 bar and 90% efficiency on clean or lightly filled media. HP/MHP pumps provide direct 1:1 replacement for HERMETIC HP5 up to 2,000,000 mPas. Spare parts cover rotors, idlers, and seals.
- ZI: up to 14 bar, 2–4120 l/min, -40..+300 °C
- HP/MHP: 1:1 HERMETIC HP5 swap, up to 16 bar
- PEEK displacer to 160 °C, metal to 250 °C
- Parts: rotor, idler gear, crescent, seals
KE and KD Rotary Lobe Pumps (Blue Series)
KE and KD Blue Series rotary lobe pumps feature single- or double-bladed circular pistons revolving around a fixed hub for media up to 3,400,000 mPas and solids up to 80 mm. Pressures reach 40 bar and flows 5000 l/min. Service parts include lobes, hubs, and shaft seals.
- KE/KD: up to 40 bar, 1–5000 l/min (300 m³/h)
- Efficiency 75–92%, speeds up to 750 rpm
- Solids up to 80 mm, suction lift up to 8 m
- Parts: circular pistons, hubs, timing gears
KS and KDS Hardened Rotary Lobe Pumps
Hardened KS and KDS Blue Series rotary lobe pumps handle heavily filled and abrasive media at pressures up to 70 bar and temperatures from -60 to +450 °C. Flow rates span 2 to 2474 l/min with solids up to 50 mm. Replaceable parts cover rotors, shafts, and seals.
- KS/KDS: up to 70 bar, 2–2474 l/min (148 m³/h)
- Solids up to 50 mm, dry content up to 90%
- Speeds to 750 rpm, efficiency 75–92%
- Parts: hardened lobes, shafts, lip/mech. seals
KM Multi-Wing and KLR Ultra-High Viscosity Pumps
KM Blue Series pumps use contactless 6- or 3-wing lobes driven by external timing gears to cut pulsation up to 70 bar and 3875 l/min. KLR pumps handle ultra-viscous fluids up to 5,000,000 mPas at 16 bar. Spare components cover multi-wing rotors and shaft seals.
- KM: up to 70 bar, 2–3875 l/min, solids <=1 mm
- KLR: 16 bar, viscosity up to 5,000,000 mPas
- External timing gear, suction lift to 6 m
- Parts: M/M3 lobes, timing gears, shaft seals
Modular Additive Dosing and Mobile 2K Systems
Zeilfelder Pumpen builds mobile 2K dosing carts on tandem pumps for adhesives and sealants, plus modular 10-ft container additive dosing systems for asphalt plants. Dosing repeatability exceeds 99% with SCADA interfaces. Service items cover tandem pump heads, heating, and seals.
- Dosing repeatability > 99%, IoT/SCADA ready
- Mobile 2K dosing carts with tandem pumps
- 10-ft container additive units for asphalt mix
- Parts: tandem pump blocks, heaters, valve seals
Shaft Seals, Heating Jackets, and Custom Spare Parts
Every Zeilfelder pump supports lip seals, gland packing, single or double balanced mechanical seals, and magnetic couplings. Bodies and seal chambers can be heated via steam, thermal oil, or electric cartridges. Wetted alloys include grey iron, stainless steel, Hastelloy, titanium, and ceramics.
- Seals: lip, packing, single/double mech., mag drive
- Heating: steam, thermal oil, or electric jacket
- Materials: iron, steel, Hastelloy, Ti, ceramic
- Custom spare parts machined to pump serial no.
Selecting Zeilfelder Pumpen Positive Displacement Series by Viscosity and Solids
For clean self-lubricating fluids at high differential pressures up to 120 bar and temperatures up to +450 °C, Zeilfelder Pumpen (ASM Dimatec Group) offers solid-milled ZK, ZH/ZV Blue Series, and chemical LZ external gear pumps.
Standard industrial duties up to 20 bar and 14 bar are covered by PQ Green external and ZI Green internal gear pumps with up to 90% efficiency.
When handling shear-sensitive, polymerizing, or particle-laden media up to 3,400,000 mPas (5,000,000 mPas for KLR) and up to 90% solids content, contactless KE/KD (solids to 80 mm), hardened KS/KDS (to 50 mm), and low-pulsation multi-wing KM (to 1 mm) rotary lobe pumps use external timing gears outside the fluid chamber.
API, ATEX, TA Luft Compliance, Heating Jackets, and HERMETIC-Lederle Replacement
Zeilfelder Pumpen equipment is engineered in Wolfsburg, Germany with over 90% of components manufactured domestically and can be configured to meet API, ATEX, TA Luft, and TR-CU standards.
Sealing arrangements span lip seals, stuffing boxes, single or double balanced mechanical seals, and hermetic magnetic couplings.
Steam, thermal oil, or electric heating jackets maintain fluid viscosity in bitumen, polymer melt, resin, and adhesive lines. Following the 2020 takeover of HERMETIC-Lederle pump lines (LZ, HP, MHP, KRH, KRL, KRM), HP/MHP units provide 1:1 drop-in replacements for HP5 installations.
Zeilfelder Pumpen and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zeilfelder Pumpen and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZPM Zahnradpumpenfabrik Mannheim
- Equipment and parts for Victor Pumpen
- Equipment and parts for Josef Emmerich Pumpenfabrik
- Equipment and parts for Wright Flow Technologies
- Equipment and parts for SPECK Pumpen
Documents and sources
- Zeilfelder Pumpen — official English overview (performance ratings & ASM Dimatec Group)
- Zeilfelder Pumpen — external gear pumps ZK, ZH/ZV, LZ, PQ specifications
- Zeilfelder Pumpen — internal gear pumps ZI & HP/MHP (HERMETIC HP5 replacement)
- Zeilfelder Pumpen — rotary lobe & multi-wing pumps KE/KD, KS/KDS, KM, KLR
- Zeilfelder Pumpen — positive displacement pump principles & timing gear design
- Zeilfelder Pumpen — technical advantages, shaft seals & heating jackets
- Zeilfelder Pumpen — company history, Made in Germany & HERMETIC-Lederle takeover
