Specim hyperspectral cameras and systems
Selection of Specim equipment: FX10, FX17, FX19, FX50, FX120 and GX17 cameras for sorting lines, SX10, SX25 and SWIR research cameras, AFX systems, the SisuROCK workstation and LabScanner units.
FX10 VNIR camera
Line-scan hyperspectral camera for the visible and near-infrared range of 400-1000 nm, built for industrial lines and laboratories. Wavelengths are selected freely within the camera coverage. The colour-optimised FX10c covers 400-770 nm. FX series firmware is updated on site.
- 400-1000 nm range
- FX10c version: 400-770 nm
- Line-scan imaging mode
- Unified FX calibration
FX17 NIR camera
Near-infrared camera for the 900-1700 nm range for industrial lines and laboratories, with free selection from 224 bands. It tells plastic types apart for recycling and measures the sugar level of fruits and vegetables and the moisture of baked goods. Unified calibration keeps data comparable.
- 900-1700 nm range
- Selection from 224 bands
- Plastic type recognition
- Unified wavelength calibration
FX19 sorting camera
High-speed camera for the extended NIR/SWIR range of 1130-1920 nm, announced on 10 February 2026. 640 spatial pixels, up to 527 fps, a TE-cooled InGaAs sensor and a GigE Vision interface. Typical tasks are plastics, paper and electronic waste sorting and foil and thin-film inspection.
- 1130-1920 nm range
- 640 pixels, up to 527 fps
- GigE Vision interface
- TE-cooled InGaAs sensor
FX50 MWIR camera
Line-scan camera for the full mid-wave infrared range of 2.7-5.3 µm, used to sort black PS, PE, PP, ABS and PVC plastics, analyse hydrocarbons and minerals and detect contamination on metal. The first version came out in 2019; the camera has temperature-stabilised optics and GigE Vision.
- 2.7-5.3 µm range
- Black plastics sorting
- Temperature-stabilised optics
- GigE Vision interface
FX120 LWIR camera
Thermal hyperspectral camera for the long-wave infrared range of 7.7-12.3 µm: 160 spectral bands, up to 240 fps and a GigE Vision interface. It maps minerals, detects thermal anomalies and classifies gases; with the SisuROCK workstation it scans drill cores. It replaced the Specim OWL camera.
- 7.7-12.3 µm range
- 160 spectral bands
- Up to 240 fps
- Works with SisuROCK
GX17 inline camera
Near-infrared camera for the 980-1730 nm range for inline sorting and inspection on conveyor belts and free-fall systems. 480 spatial pixels, 50% more than QVGA sensor cameras, a frame rate of up to 800 Hz and detail down to 1 mm flakes. It can be controlled directly from SpecimONE.
- 980-1730 nm range
- 480 pixels, up to 800 Hz
- Flakes down to 1 mm
- Controlled via SpecimONE
SX10 and SX25 cameras
Research-grade series. SX10 (400-1000 nm, launched October 2026): 1560 spatial pixels, 680 bands, 275 fps. SX25 (960-2500 nm, launched September 2025): 640 pixels, up to 392 bands, 1500:1 signal-to-noise ratio, 162 fps. Both connect over GigE.
- SX10: 1560 pixels, 680 bands
- SX25: 960-2500 nm range
- SX25: SNR 1500:1
- GigE connection
SisuROCK core workstation
Automated workstation for scanning drill cores and other geological samples. It takes Specim VNIR, SWIR, MWIR and LWIR hyperspectral cameras, an RGB camera and a 3D imager, with double-sided illumination. It scans cores without sample preparation, hundreds of boxes per day.
- VNIR to LWIR cameras
- RGB camera and 3D imager
- Double-sided illumination
- Hundreds of core boxes a day
Choosing Specim equipment
Specim, Spectral Imaging Ltd. was founded in 1995 and has its headquarters in Oulu, Finland. Since 2020 the company has been part of the Konica Minolta Group: the acquisition agreement with Konica Minolta Sensing Europe B.V. was announced on 27 November 2020.
The line-up covers the FX series industrial cameras and the GX17 camera, the SX10, SX25 and SWIR research cameras, the AFX10 and AFX17 UAV systems, the SisuROCK drill core workstation, LabScanner laboratory scanners, ImSpector spectrographs, HI400S illumination units and the LUMO, SpecimINSIGHT and SpecimONE software.
Cameras for sorting lines
The spectral range follows the material: FX10 covers 400-1000 nm, FX17 900-1700 nm, FX19 1130-1920 nm for plastics, paper and electronic waste, FX50 2.7-5.3 µm for black plastics and FX120 7.7-12.3 µm for minerals and gases.
FX cameras pass the material identification result to machine vision systems that drive robot hands or air jets.
GX17 (980-1730 nm, 480 pixels, up to 800 Hz) is built for inline sorting on conveyor belts and free-fall systems. The SpecimONE platform combines FX cameras, SpecimINSIGHT software for classification models and the SpecimCUBE processing unit that runs them on the line.
For textiles the RETEX solution identifies cotton, polyester, polyamide, viscose, wool and acrylic.
Laboratory and field systems
SX10 (1560 pixels, 680 bands) offers three times more spectral bands than FX10; SX25 covers 960-2500 nm with a 1500:1 signal-to-noise ratio. The SWIR camera (1000-2500 nm, 384 pixels, up to 400 fps) connects over CameraLink and has temperature-stabilised optics.
LabScanner 40×20 and 100×50 have 400×200 mm and 100×50 cm sample trays.
AFX10 (400-1000 nm) and AFX17 (900-1700 nm) put a hyperspectral camera, a computer and a GNSS/IMU unit into one enclosure for drones, with an F1.7 aperture; data is processed in CaliGeo PRO. The SisuROCK workstation scans drill cores with cameras from the visible to the long-wave infrared range.
Specim and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Specim and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Pi Imaging Technology
- Equipment and parts for Vieworks
- Equipment and parts for VIGO Photonics
- Equipment and parts for Qnami
Documents and sources
- About Specim — founded in 1995
- Konica Minolta agreement — Specim acquisition in 2020
- Chinese company page — Konica Minolta Group
- Specim FX series — overview
- Specim FX10 camera — overview
- Specim FX17 camera — overview
- Specim FX19 camera — overview
- Specim FX19 announcement — February 2026
- Specim FX50 camera — overview
- Improved Specim FX50 — news
- Specim FX120 camera — overview
- Specim FX120 announcement — news
- Specim GX17 camera — overview
- Specim GX17 launch — news
- Specim SX10 camera — overview
- Specim SX10 launch — October 2026
- Specim SX25 camera — overview
- Specim SX25 launch — September 2025
- Specim SWIR camera — overview
- Specim AFX10 UAV system — overview
- Specim AFX17 UAV system — overview
- SisuROCK workstation — overview
- LabScanner 40×20 — overview
- LabScanner 100×50 — overview
- Specim HI400S illumination unit — overview
- ImSpector V10E spectrograph — overview
- ImSpector N17E spectrograph — overview
- SpecimONE platform — overview
- Specim RETEX textile solution — overview
- LUMO software family — overview
- Recalibration service — maker conditions
- Specim Community support — process
- End-of-life process — phases
- AIE and unified spectral calibration — technical note
- Smile and keystone — technical note
- Choosing the frame rate — technical note
- White reference and reflectance — technical note
- Illumination sources — technical note
