Hense Wägetechnik (Hense Weighing) Industrial Weighing & Flow Systems
Industrial weighing equipment by Hense Wägetechnik (Hense Weighing): SafeMount & CleverMount silo modules, FlowSlide mass flow meters, BW10/BW20 belt scales, 24 GHz MIC probes and Target 260 controllers.
Silo & Reactor Load Cell Assemblies SafeMount, CleverMount, TLC 95
Weighing modules monitor silos, hoppers, mixers, and reactors in chemical, food, and bulk plants. Bolted assemblies compensate thermal expansion without extra tie rods. Stainless steel and ATEX 1GD/3GD options exist.
- SafeMount 10–300 t, Baby 1–25 t
- CleverMount & CompactMount 20–7500 kg
- CleanMount 1–25 t, TLC 95 3–35 t
- Canister 300–1200 t, T33 10–20 t
DMS Silo Retrofitting & Industrial Platform Scales
Bolt-on DMS strain-gauge sensors retrofit existing silos above 10 t without structural changes. Temperature-compensated sensors measure support compression and elongation. Platform scales up to 20 t use IP69/69K load cells.
- DMS silo retrofit from 10 t
- Double-T beam and pipe supports
- Platforms up to 2000×2500 mm, 0.1 kg–20 t
- Special platforms to 100 t, IP69/69K
Bulk Solids FlowSlide Mass Flow Meters (eco, maxi, ultra)
Inline FlowSlide meters measure free-flowing powders and granules via centripetal force on a curved chute. Having no moving parts, readings stay independent of bulk density. Pneumatic cleaning prevents dust buildup.
- Flow rate 100 kg/h to 500,000 kg/h
- eco and maxi series up to 300 m³/h
- ultra series up to 650 m³/h
- Curved chute, pneumatic cleaning
BW10, BW20 Belt Scales & Optical Laser Conveyor Scales
Flat-frame BW10 and BW20 belt scales integrate into conveyors handling 500 kg/h to 10,000 t/h. Factory-set overload stops protect load cells from shocks. Optical laser scales scan layer profiles contactlessly.
- BW10 & BW20: 500 kg/h to 10,000 t/h
- Belt speed wheel & overload stop
- Optical laser profile in m³/h and t/h
- 1-year data log, web server & SIM
Microwave Sensors MIC Flowmeter & MIC Smart Flow/NoFlow
Flush-mounted 24 GHz microwave probes monitor moving bulk solids in pneumatic pipes and chutes without wear. Stainless V4A waveguides withstand abrasion. IP66 and ATEX Zone 20/21/22 units connect via industrial buses.
- 24 GHz signal, ±3–5% accuracy
- V4A steel probe, 115×90×82 mm
- Up to 120/200 °C, 15–20 bar, IP66
- CAN-bus, Modbus, Profibus DP, ATEX
Target 260, Status 290S, SysTec Controllers & Smart Junction Box
Target 260 amplifiers and Status 290S batch controllers feature 24-bit resolution and OLED displays. The Intelligent Junction Box monitors individual mV/V load cell signals via CAN-bus. SysTec IT1–IT6000E drive dynamic scales.
- Target 260: 24-bit, IP65/IP66, OIML R76
- Status 290S: coarse & fine dosing
- Smart box: 4 load cells, OLED 256×64
- SysTec IT1, IT3 IP69K, IT2000M, IT6000E
Engineering Selection of Hense Wägetechnik (Hense Weighing) Systems
Hense Wägetechnik GmbH (Brilon, Germany) builds static weighing assemblies from 20 kg to 1,200 t alongside dynamic mass flow meters and belt scales.
Project sizing matches the load cell assembly to indoor, outdoor, or mixer duty: SafeMount and Canister for heavy outdoor silos, CleanMount and CleverMount stainless units for indoor hygienic vessels, or bolt-on DMS strain-gauge sensors for retrofitting existing silos above 10 t without structural changes.
For free-falling bulk solids, FlowSlide mass flow meters handle 100 to 500,000 kg/h with no moving parts; BW10/BW20 conveyor scales cover up to 10,000 t/h, optical belt scales scan profiles via lasers, and 24 GHz MIC probes monitor pneumatic lines.
Batch Control, Industrial Buses & Hazardous Area Options
Signal processing relies on 24-bit Target 260 amplifiers, Status 290S coarse/fine dosing controllers, SysTec IT1–IT6000E terminals, and the Intelligent Junction Box monitoring up to 4 load cells per unit via CAN-bus.
Standard and modular interfaces cover CAN-bus, Modbus, Profibus DP, 4–20 mA analog signals, and remote web/SIM logging on optical belt scales. ATEX versions are available for Zone 2/22 electronics and Zone 20/21/22 microwave flow probes.
Hense Wägetechnik and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hense Wägetechnik and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZSE Electronic
- Equipment and parts for UNI-Geräte
- Equipment and parts for Hengfu
- Equipment and parts for HV Diagnostics
Documents and sources
- About Hense Wägetechnik GmbH — company profile and history
- Hense Wägetechnik (Hense Weighing) main product catalog
- Retrofittable DMS silo scale technology and beam installation
- FlowSlide inline mass flow meter for free-flowing bulk solids
- BW10 and BW20 conveyor belt scales specifications
- Optical laser belt scale contactless volume flow measurement
- MIC Flowmeter 24 GHz non-contact solid flow sensor
- Intelligent junction box for load cells with CAN-bus and OLED
- Target 260, Status 290S and SysTec evaluation electronics and controllers
- Industrial platform scales from 0.1 kg to 20 t and IP69K variants
- Technical review of MIC-Smart microwave sensors in pneumatic lines
- Manufacturer commissioning, calibration and service overview
