Hema Endüstri (Hema Endüstri A.Ş.) Mobile Hydraulics, Steering & Drivetrain Equipment

Complete gear and axial piston pumps, MV/SV directional control valves, commercial steering systems, tractor hydraulic lifts, and drivetrain axles from Hema Endüstri (Hema Endüstri A.Ş.), sized by displacement and shaft interface.

Aluminum-body gear pumps & motors

Aluminum-body hydraulic gear pumps in series 0.5P, 0P1, 1PA, 1PN, 1.5P, 1.5PN, 2P1, 2PN, 3P1, silent 1PS, and helical 1PH/1.5PH cover 1.1 to 116.7 cm³/rev at continuous pressures up to 250 bar. Tandem builds and 1MN–2MN motors (6.1–73 cm³/rev) use replaceable shaft seals and thrust bushings.

  • Series: 0.5P, 0P1, 1PA, 1PN, 1.5P–3P1, 1PS, 1PH, 1MN–2MN
  • Displacement: 1.1–116.7 cm³/rev (pumps), 6.1–73 cm³/rev (motors)
  • Continuous pressure: up to 250 bar; 12- and 18-tooth gear profiles
  • Service parts: shaft lip seals, pressure-balanced bushings, O-rings

Ductile iron gear pumps & motors

Heavy-duty gear pumps from Hema Endüstri in nodular iron housings deliver 16 to 239.8 cm³/rev at up to 280 bar nominal pressure. Multi-section drives and integrated relief or load-sensing priority valves are supported. Gear motors run 6.1–110.8 cm³/rev at 600–4000 rpm.

  • Displacement: 16–239.8 cm³/rev (pumps), 6.1–110.8 cm³/rev (motors)
  • Nominal pressure: up to 280 bar (pumps), up to 250 bar (motors)
  • Motor speed range: 600–4000 rpm, single and bidirectional rotation
  • Subassemblies: integrated relief/priority valves, seal kits, gear sets

Variable axial piston pumps

Hema Endüstri variable axial piston pumps serve open-circuit systems from 35 to 75 cm³/rev. They run continuously at 260 bar with low noise and fast pressure response. Multiple port covers and min/max displacement limiters fit OEM setups.

  • Displacement: variable 35–75 cm³/rev for open-circuit hydraulics
  • Continuous rating: 260 bar steady operation with short response time
  • Adjustments: mechanical minimum and maximum displacement limiters
  • Applications: presses, rolling mills, die-molding and mobile machines

Directional & control valves

Hema Endüstri control valves cover open-center monoblocks at 20–450 lpm (MV023–4013, 033–059), sectional valves at 50–150 lpm (MV060, MV050, MV090, SV033), and closed-center MV183 (180 lpm). Actuation includes manual, pilot, and electro-hydraulic.

  • Monoblock open-center: 20–450 lpm (MV023–MV0182, 033–059, 4009–4013)
  • Sectional series: MV060 (60), MV050 (80), MV090 (100), SV033 (150), MV183 (180 lpm)
  • Valve families: directional, transmission control, auxiliary, lift valves
  • Actuation & parts: manual, pilot, electro-hydraulic; spools and seal kits

Commercial vehicle steering systems

Hema Endüstri builds hydraulic steering gearboxes up to 8.5 tons front axle load, with over 1,000,000 units produced. Complete circuits pair vane and EHP electro-hydraulic pumps with angular gearboxes, emergency valves, oil tanks, cylinders, and Pitman arms.

  • Front axle load rating: power steering gearboxes up to 8.5 tons
  • Steering feed: vane pumps and electro-hydraulic steering pumps (EHP)
  • Circuit hardware: angular gearbox, emergency valve, oil tank, Pitman arm
  • Production track record: over 1,000,000 commercial steering boxes built

Tractor hydraulic & EH lifts

Hema Endüstri manufactures hydraulic and electro-hydraulic (EH) hitch lifts for 18–140 HP tractors. Matching lift control valves and linkage assemblies regulate draft under tillage loads, using serviceable spools and hydraulic seals.

  • Tractor power range: hydraulic lifts built for 18–140 HP tractors
  • System variants: mechanical and electro-hydraulic (EH) hitch lifts
  • Dedicated valving: tractor hydraulic lift control valve assemblies
  • Service items: lift cylinder seals, control valve spools, EH linkage

Axles, transaxles & PTO gearboxes

Hema Endüstri drivetrain lines cover tractor front axles (70–140 HP), transaxles (60–173 HP), and rigid or steering backhoe loader axles (90–105 HP). The plant also machines PTO speed increasers, bevel gear sets, shafts, and differentials.

  • Tractor driveline: front axles (70–140 HP) and transaxles (60–173 HP)
  • Backhoe loaders: rigid and steering axle assemblies for 90–105 HP
  • Agricultural PTO: speed increaser gearboxes for implement drives
  • Wear components: bevel crownwheel-pinion sets, gears, shafts, differentials

Engine units & braking assemblies

Hema Endüstri machines cylinder blocks, cylinder heads, crankshafts, balancer units, oil sumps, flywheels, and housings. Its Çerkezköy automotive plant builds front brake calipers, rear drum brakes, servo brake boosters, and hydraulic cylinders.

  • Engine hardware: cylinder blocks, heads, crankshafts, balancers, flywheels
  • Brake assemblies: front disc brake calipers and rear drum brakes
  • Actuation cylinders: servo brake boosters, brake and clutch cylinders
  • Manufacturing base: in-house iron foundry and precision aluminum machining

Sizing gear and axial piston pumps by system duty

Aluminum gear pumps (0.5P–3P1, 1PS, 1PH) span 1.1 to 116.7 cm³/rev up to 250 bar, ductile iron gear pumps deliver 16 to 239.8 cm³/rev up to 280 bar, and variable axial piston pumps cover 35 to 75 cm³/rev at 260 bar continuous duty.

Unit selection confirms exact displacement, shaft rotation (CW/CCW), front mounting flange, port configuration, and any integrated relief, flow-control, or load-sensing priority valves.

Configuring MV/SV directional valves and commercial steering

Open-center monoblock valves handle 20–450 lpm (MV023–MV093S, 033–035, MV0180–4013), open-center sectional valves cover 50–150 lpm (MV060, MV050, MV090, SV033), and closed-center flow-sharing MV183 delivers 180 lpm with manual, pilot, or electro-hydraulic control.

Commercial steering assemblies combine power steering gearboxes rated up to 8.5 tons front axle load with vane or EHP electro-hydraulic pumps, angular gearboxes, emergency valves, oil tanks, and Pitman arms.

Tractor hydraulic lifts, axles, and OEM powertrain integration

Drivetrain and agricultural assemblies cover hydraulic and EH lifts (18–140 HP tractors), tractor front axles (70–140 HP), transaxles (60–173 HP), rigid and steering backhoe loader axles (90–105 HP), and PTO speed increaser gearboxes.

Complete units and OEM replacement subassemblies are matched via the Hema Endüstri A.Ş. housing nameplate code and mechanical mounting dimensions.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.