UNI-Geräte (E. Mangelmann) Industrial Valves, Valve Stations & Parts

German safety shut-off solenoid valves (EVA, EVSA, EVO, VX), electro-pneumatic valves (EPVA, PX), flow control fittings (MRK, MRS), and engineered fuel valve trains for power, combustion, and marine sectors.

Gas Solenoid Valves EVA and EVSA

Normally closed (NC) EVA and EVSA safety shut-off valves operate on natural gas, biogas, and LPG under EN 161 and EN 16678. EVA covers low pressures up to 0.2–1 bar, while EVSA is rated for 4 bar or 10 bar. Replaceable parts include MG solenoid coils, ATEX actuators, and valve seat seals.

  • Threads G1/4–G2 and flanges DN 15–DN 200
  • Operating pressure 0.2–1 bar and 4–10 bar
  • EU/2016/426 type-examined Class A valves
  • MG coils and actuators for ATEX zones 1/2

Normally Open EVO / EVSO and Double VX Valves

Normally open EVO and EVSO solenoid valves meet EN 16678 and EN 16304 for venting lines up to 40 bar. The compact VX unit integrates two Class A safety shut-off valves in series for burners. Service parts include solenoid coils, plungers, springs, and seal kits.

  • EVO / EVSO: G1/4–G1, DN 15–DN 50 up to 40 bar
  • VX double block: DN 65–DN 150 at 0.5 or 5 bar
  • Normally open venting and dual shut-off safety
  • Replaceable coils, plungers, and seal kits

Electro-Pneumatic Valves EPVA, AEPV, and EPVO

Normally closed EPVA and AEPV/EPVA electro-pneumatic valves cover flanged sizes from DN 15 to DN 400 at pressures up to 10 bar or 40 bar. Normally open EPVO models handle G 3/4 and DN 15–DN 65 lines. Maintainable components include 3/2-way pilot valves, pneumatic actuators, and piston seals.

  • EPVA: DN 15–DN 400 flanged up to 10 bar (1000 kPa)
  • AEPV / EPVA: DN 15–DN 100 up to 40 bar (4000 kPa)
  • EPVO (NO): G 3/4, DN 15–DN 65 up to 10–40 bar
  • 3/2-way pilot solenoids and actuator seal kits

Marine Double Valves PX and PX...16-4/DPSO Units

Double electro-pneumatic PX safety shut-off valves meet EN 16678 Class A up to 16 bar for marine gas and dual-fuel engines. Four-valve PX...16-4/DPSO combinations integrate two NC and two NO actuators in one compact block. Serviceable parts cover pneumatic drives, limit switches, and seals.

  • PX (NC): DN 50, 65, 80, 100, and 150 up to 16 bar
  • PX...16-4/DPSO: 4-valve NC/NO block combination
  • Media: natural gas, LNG, CNG, hydrogen, ammonia
  • LR and KR marine classification compliance

Flow Control Valves MRK MA, MRS, and MEA

MRK MA butterfly valves up to DN 400 handle hot gases up to 550 °C with solenoid, manual, or external drives. MRS slide valves (DN 15–DN 200) give a 20:1 ratio up to 10 bar, while MEA fittings preset gas and fluid flow. Spare parts include shafts, discs, and seals.

  • MRK MA: DN 15–DN 400, gas temperature up to 550 °C
  • MRS slide valve: DN 15–DN 200, 10 bar, 20:1 range
  • MEA: G1/4–G2 and DN 15–DN 80 up to 10 bar
  • Solenoid drives, bare-shaft adapters, and packings

Valves for Liquid Fuels, Steam, and Aggressive Media

EVS...Ü (DIN ISO 23553-1), EV...Ü/EVF...Ü, and EPV...Ü/EPVF...Ü (DIN EN 16668) shut-off valves conform to PED 2014/68/EU for heating oil, steam, hot water, and aggressive fluids up to +200 °C and 40 bar. Service parts cover high-temperature seals, trim assemblies, and Ex coils.

  • EVS...Ü: G1/4–G2 and DN 15–DN 150 at 4 or 10 bar
  • EV...Ü / EVF...Ü: DN 15–DN 50 from 5 to 40 bar
  • EPV...Ü / EPVF...Ü: DN 15–DN 80 from 6 to 40 bar
  • Temperature up to +200 °C under PED 2014/68/EU

Custom Valve Stations and Gas Control Trains

UNI-Geräte engineers custom fuel valve stations for heavy-oil boilers, syngas turbines up to 300 °C in ATEX Zone 2, and dual-fuel marine engines with LR and KR approvals. Assemblies combine ball valves, ceramic filters, double shut-off blocks, and vent lines.

  • Heavy-oil boiler skids: 40 bar design, 250 °C steam
  • Syngas turbine trains: up to 300 °C, 16 bar, ATEX Zone 2
  • Marine DF vertical units: 6 bar design, LR and KR
  • Ceramic filter cartridges, regulators, and vent valves

Solenoid Actuators, SFR Strainers, and Accessories

Maintenance parts for UNI-Geräte valves include replacement solenoid drives (including ATEX Zone 1 and Zone 2 coils), limit switch attachments, compressor units KPE 001/002 and WA038-C1, opening/closing delay units, adapter insert rings, and type SFR dirt strainers.

  • Solenoid drives for hazardous ATEX Zones 1 and 2
  • Type SFR strainers and ceramic filter cartridges
  • Compressor units KPE 001/002 and WA038-C1
  • Limit switch assemblies and opening/closing delays

Applications in Power, Combustion, and Marine Sectors

UNI-Geräte (E. Mangelmann) valves and fuel trains operate in base-load and peak-load power plants, industrial thermoprocessing furnaces, large steam boilers, and vessels equipped with gas or dual-fuel (DF) engines.

Supported media span natural gas, biogas, mine gas, LNG, CNG, hydrogen, ammonia, synthesis gas, heating oil, heavy fuel oil, methanol, and superheated steam.

Selecting Series by Pressure, Temperature, and Nominal Size

Low-pressure gas lines up to 1 bar use EVA solenoid valves (G1/4–DN 200), medium pressures up to 10 bar use EVSA, and high-pressure shut-off or venting up to 40 bar relies on EVO/EVSO and electro-pneumatic EPVA/AEPV/EPVA models up to DN 400.

Flow modulation up to 550 °C is handled by MRK MA butterfly valves and MRS slide valves (20:1 ratio), while EVS...Ü, EV...Ü, and EPV...Ü valves handle liquid fuels and steam up to +200 °C under PED 2014/68/EU.

Turnkey Valve Stations and Custom Gas Trains

Factory system solutions include double heavy-oil boiler stations (40 bar design, 250 °C atomizing steam), stainless-steel syngas turbine skids up to 300 °C for ATEX Zone 2, and vertical dual-fuel marine gas valve units with Lloyd’s Register (LR) and Korean Register (KR) approvals.

UNI-Geräte and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UNI-Geräte and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.