UNI-FÖRDERTECHNIK Industrial Pumps, Filters, and Spare Parts

Process pumps, automatic and bag filtration systems, hose reels, flow meters, and breakaway couplings by UNI-FÖRDERTECHNIK GmbH (Salzgitter, Germany) for chemical, food, pharma, coatings, and petrochemical lines.

Ring piston pumps MICRO-C, G-FLO/H-FLO, C, S, A

Hermetically sealed rotary ring piston pumps cover MICRO-C (from 2 l/h), G-FLO / H-FLO (100 l/h to 65 m³/h), C-Serie, S-Serie, and A-Serie with stainless steel bellows drives. They handle shear-sensitive media with minimal heat input. Spare parts: bellows, piston, ring, and ball bearings.

  • Flow rates from 2 l/h (MICRO-C) up to 65 m³/h
  • Stainless steel bellows drive without mechanical seal
  • Up to 5 min dry-run capability in ATEX zones
  • Hygienic S-Serie (12 m³/h) and ductile iron C-Serie

Gear pumps EG, 3600, A, ROC, F, 5600, and HC

Industrial gear pumps in EG-Serie, 3600, A-Serie, ROC, F-Serie, 5600, and HC-Serie transfer oils, bitumen, resins, and fuels up to 230 m³/h and 29 bar. Iron and stainless units run at 1000–1200 rpm up to 120 °C. Replaceable parts include hardened shafts, gears, carbon bearings, and seals.

  • Flow up to 230 m³/h (HC-Serie) and pressure up to 29 bar
  • Hermetic magnetic-drive EG-Serie up to 45 m³/h and 13 bar
  • Hardened steel gears and shafts with carbon bearings
  • Packing, lip, or mechanical shaft seal configurations

Sliding vane (P, SNP, ML/HXL) and rotary lobe pumps

Sliding vane P-Serie, (S)NP, X(LW), ML/HXL, CRL/SGL, and SMVP pumps move solvents, fuels, and liquefied gases up to 500 m³/h at 13.8 bar. Stainless rotary lobe models 105–450 handle media up to 1,000,000 mPas and 200 °C. Spare parts: vanes, lobe rotors, FKM/EPDM/PTFE seals, and shaft bearings.

  • Sliding vane ML/HXL series up to 500 m³/h and 13.8 bar
  • CRL/SGL series up to 68 m³/h for CO₂ and liquefied gases
  • Rotary lobe 105–450 up to 1,000,000 mPas and 200 °C
  • ATEX, FDA, and EHEDG compliance with DIN 11851 ports

Centrifugal, polymer magnetic, and side channel pumps

Centrifugal pumps transfer water, solids, and hot oil up to 9000 m³/h at 13.7 bar. Magnetic drive units in PP, PVDF, titanium, and 1.4571 steel reach 130 m³/h; side channel pumps hit 40 bar from -60 to 200 °C. Spares include impellers, SiC bearings, magnetic rotors, and EPDM/FPM seals.

  • Solids and clear-water centrifugal pumps up to 9000 m³/h
  • Magnetic drive units in PP (75 °C), PVDF (90 °C), Ti, 1.4571
  • Silicon carbide (SiC) sleeve bearings and Nd-Fe-B magnets
  • Side channel pumps up to 40 bar across -60 to 200 °C

Diaphragm, screw spindle, and peristaltic hose pumps

Electric double diaphragm pumps (0.3–27 m³/h) in aluminum, steel, PP, PVDF, and Hastelloy join hydraulic dosing (up to 0.9 m³/h) and stainless screw pumps (up to 100 m³/h). Peristaltic hose pumps in 12 sizes reach 77 m³/h and 15 bar. Spares: NR/NBR/EPDM/Hypalon hoses, diaphragms, and sensors.

  • Electric double diaphragm 0.3–27 m³/h with speed control
  • Wetted alloys and polymers: Al, steel, PP, PVDF, Hastelloy
  • Peristaltic hose pumps in 12 sizes up to 77 m³/h and 15 bar
  • NR, NBR, EPDM, Hypalon hoses, DN125 flanges, leak sensors

Industrial filters, hose reels, meters, and couplings

Automatic filters (down to 15 µm, up to 225 m³/h, 100,000 mPas), magnetic, bag, duplex, and PP/PVDF plastic units (1–1000 µm) protect process lines. The lineup adds >2700 hose reels, flow meters, and breakaway couplings. Spares cover stainless mesh elements, filter bags, magnets, and seals.

  • Automatic filters down to 15 µm, up to 225 m³/h and 100,000 mPas
  • Magnetic, bag, duplex, and PP/PVDF filters down to 1 µm
  • Replaceable stainless steel filter elements and perforated baskets
  • Over 2700 hose reels, cryogenic flow meters, breakaway couplings

Selecting positive displacement and centrifugal pump series

For shear-sensitive polymers, resins, chocolate, and high-viscosity chemicals, UNI-FÖRDERTECHNIK offers hermetically sealed ring piston pumps with stainless steel bellows (MICRO-C, G-FLO / H-FLO, C/S/A-Serie) and rotary lobe models 105–450 rated up to 1,000,000 mPas, 200 °C, ATEX, FDA, and EHEDG.

Gear pumps (EG, 3600, A, ROC, F, 5600, HC up to 230 m³/h and 29 bar) and sliding vane pumps (P, (S)NP, X(LW), ML/HXL, CRL/SGL, SMVP up to 500 m³/h) handle fuels, bitumen, solvents, and liquefied gases.

Centrifugal (up to 9000 m³/h), PP/PVDF magnetic drive, side channel (up to 40 bar), diaphragm, and hose pumps cover corrosive and abrasive duties.

Process filtration, hose reels, flow metering, and couplings

Filtration equipment spans automatic backwash filters with stainless steel elements (down to 15 µm mesh or 50 µm perforated for gels and fibers, up to 225 m³/h and 100,000 mPas), magnetic filters down to 1 µm (up to 120 m³/h), bag filters, and switchable duplex housings.

PP and PVDF polymer filter housings cover 1–1000 µm for corrosive chemicals. Auxiliary process equipment includes over 2700 standard hose and cable reel configurations, cryogenic-capable flow meters, and safety breakaway couplings for loading and transfer stations.

Specification criteria and wear-part matching by nameplate

Pump and filter sizing aligns flow rate, differential pressure, fluid viscosity, temperature (-60 to 200 °C depending on series), solids size, and ATEX or hygienic port standards such as DIN 11851 milk pipe threads and DIN flanges up to DN125.

Replacement kits and subassemblies cover stainless bellows, silicon carbide (SiC) and carbon bearings, FKM/EPDM/PTFE/FEP seals, sliding vanes, NR/NBR/EPDM/Hypalon hoses, and stainless filter baskets matched to the equipment nameplate.

UNI-FÖRDERTECHNIK and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UNI-FÖRDERTECHNIK and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.