UNIOELER / L.+G. Beck Industrial Lubrication Systems and Pumps
German lubrication systems by UNIOELER / L.+G. Beck (L.+G. Beck GmbH): manual and electric drip oilers UNI/ELO, MPO/EPO pumps, progressive QLS/UNI Vario stations, Microspray MQL units, and DRB tanks.
Gravity and electric drip feed oilers UNI, UNI-V, UST, TOL, ELO
Manual UNI, UNI-V, Unikum, UST, and low-profile TOL drip oilers regulate drop flow via shut-off spindles. Electric ELO 40–3000, MET, and EOS units switch via PLC or UNI Control. Wick DOL, manual MOS, and KPO units fit special housings.
- Reservoir volume: 7–3000 ml (UNI/TOL), 36–3000 ml (ELO 40–3000)
- Sight glass and seals: acrylic/NBR (−30…+70 °C) or glass/FKM (+180 °C)
- ELO power: 24 V DC, 24/110/230 V AC, 7–12 VA, IP65 or IP20 protection
- Spare parts: sight glasses, NBR/FKM seal kits, solenoid coils, G1/8–G1 adaptors
Centralized lubrication pumps and stations MPO, EPO, FT/FM, QLS, UNI Vario
Progressive stations UNI QLS 301/311/401, UNI Vario, and UNI Standard 3–21 deliver oil and grease up to NLGI 2 at 205–280 bar. The range includes solenoid MPO and MPF, piston EPO with EET 200, EET 300, and gear FT/FM pumps.
- Pressure: 1.2 bar (EPO), 5–10 bar (FT/FM), 64 bar (MPO), 205–280 bar (QLS/Vario)
- Flow: 0.03 ml/stroke (MPO), 21 cm³/min (EET 200), 230 l/h (EET 300), PE 5–120 FV
- Tanks and outlets: 0.2–9 l and 1–8 kg, up to 6/12/18/21 outlets, IP65 / IP6K9K
- Spare parts: PE pump elements, check valves, gear sets, FKM seal kits
Minimum quantity lubrication UNI Microspray I/II and SKN/SKS nozzles
UNI Microspray I and II MQL units lubricate drilling, milling, turning, and sawing operations. High-pressure 80 bar piston pumps meter 3–85 mm³/stroke via UNI Control timers. Stainless steel enclosures and Kalrez seals handle demanding media.
- MQL pumps: ~80 bar, stepless 3–85 mm³/stroke dosing, up to 5 Hz cycle rate
- Supply: 24 V AC/DC or 230 V 50 Hz, compressed air 3–6 bar (4 bar nominal)
- Reservoirs and line: 500–3000 ml, standard 2.5 m hose, air maintenance unit
- Spare parts: micro-dosing pumps, pulse timers, copper and SKN/SKS saw nozzles
Oil reservoirs OBH, OMS, WOL and pressure vessels DRB (V2A/V4A)
OBH 25–3000 nickel-plated brass reservoirs (8–3000 ml) and cast aluminum OBH 5000/9000 AL tanks store lubrication media. DRB 205, 210, and 219 pressure vessels in 1.4301 (V2A) or 1.4571 (V4A) stainless steel operate up to 6 bar.
- OBH capacities: 8–3000 ml (brass) and 5 / 9 l (OBH 5000/9000 AL, G3/8 port)
- DRB pressure vessels: 5.7 l (205), 10.0 l (210), 19.5 l (219), max 6 bar
- Glass and seals: acrylic (+70 °C), borosilicate (+500 °C), NBR/FKM/PTFE
- Spare parts: pressure relief caps, glass cylinders, seal rings, tank valves
Level sensors S 30, float switches SMM 50, and flow sight glasses
The waterproof S 30 Sensor offers selectable PNP/NPN outputs and NC/NO switching for liquid level and leak monitoring. Magnetic reed float switches SMM 50 mount inside OBH, ELO, EOS, MET, and EPO tanks to prevent dry-run pump damage.
- S 30 Sensor: level and leak detection, selectable NC/NO and PNP/NPN output
- SMM 50 float switch: max 230 V AC/DC, 0.5 A, 30 VA, 1 m LiYY cable, 20–90 °C
- Mounting options: vertical SMM 50 and angled SMW 50 for OBH 500+ tanks
- Spare parts: reed switch probes, magnetic floats, flow indicators, sight glasses
DIN 3410 hinged-lid oilers, RSM-80 / RSM-B roller brushes, and fittings
Hinged-lid oilers KLG, KLZ, KWG, and KWZ are built to DIN 3410 to shield lubrication points from dust. Roller brushes RSM-80 and RSM-B (PA6 nylon or V2A bristles up to 300 °C) with MWI 115 brackets, SBK lubricators, and fittings serve chains and guides.
- DIN 3410 oilers (KLG/KLZ/KWG/KWZ): M5–M14, G1/8–G1/4 threads or 6–16 mm shank
- Roller brushes: RSM-80 (Ø80 mm) and RSM-B (Ø60/80 mm, width 20–40 mm)
- Brush bristles: PA6 nylon (up to 70–100 °C) or V2A stainless steel (up to 300 °C)
- Accessories: SBK/200-700/SBE lubricators, grease nipples, high-pressure hoses
Selection of gravity and electric drip oilers (UNI, ELO, MET)
For single and multi-point bearing, chain, and slideway lubrication, UNIOELER / L.+G. Beck offers manual UNI (10–3000 ml), DIN 3401 UNI-V, dust-tight UST, and low-profile TOL oilers. Automated lines use electric ELO 40–3000, multi-point MET, and EOS units rated for 24 V DC or 24–230 V AC.
Cylinder and elastomer pairing matches process media: PMMA acrylic with NBR seals operates from −30 to +70 °C, while borosilicate glass with FKM seals supports temperatures up to +180 °C.
Centralized lubrication pump stations and MMKS units
System builds cover solenoid oil pumps MPO (up to 64 bar, 0.03 ml/stroke) and grease pumps MPF 60/100 (NLGI 1–2), piston units EPO 500–9000 with EET 200 (1.2 bar) and EET 300 (15 bar), plus FT/FM gear pumps up to +200 °C.
Progressive lubrication networks run on UNI QLS 301/311/401 (up to 205 bar, 6/12/18 outlets) and modular UNI Vario units (up to 280 bar, PE 5–120 FV elements), while machining centers use UNI Microspray I/II MQL systems.
Reservoirs, level monitoring, and spare subassemblies
Media storage is covered by OBH reservoirs (8 ml to 9 l) and DRB 205/210/219 stainless steel pressure vessels (5.7 to 19.5 l at 6 bar in 1.4301 V2A or 1.4571 V4A).
Level supervision integrates SMM 50 magnetic reed switches (up to 230 V AC/DC) and waterproof S 30 sensors (PNP/NPN), alongside DIN 3410 hinged-lid oilers, RSM-80/RSM-B roller brushes, nozzles, and fittings.
UNIOELER / L.+G. Beck and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UNIOELER / L.+G. Beck and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Halberg Maschinenbau / SIHI-HALBERG
- Equipment and parts for Unimec Packaging Systems / Unimec Srl
- Equipment and parts for Wakefield Thermal / Wakefield-Vette
- Equipment and parts for HITROL
Documents and sources
- UNIOELER / L.+G. Beck — Official Manufacturer Website
- UNI, UNI-V, Unikum, UST, TOL Manual Drip Feed Oilers
- ELO 40 – ELO 3000 Electric Drip Feed Oilers
- MPO, MPF, EPO, EET, FT/FM Piston, Solenoid & Gear Pumps
- QLS, UNI Standard, UNI Vario Progressive Lubrication Pumps
- UNI Microspray I Minimum Quantity Lubrication System
- MQL Nozzles (Copper, Flexible, Accelerator, SKN/SKS)
- OBH Oil Reservoirs and Storage Tanks (8 ml – 9 l)
- DRB 205 / 210 / 219 Stainless Steel Pressure Vessels
- S 30 Sensor for Level and Leakage Monitoring
- SMM 50 Magnetic Reed Float Switches
- DIN 3410 Hinged-Lid Oilers (KLG, KLZ, KWG, KWZ)
- RSM-80 and RSM-B Roller Lubrication Brushes
