Hägglunds Drives (Bosch Rexroth Hägglunds) motors, drive units & systems
We source Hägglunds Drives (Bosch Rexroth Hägglunds) radial piston motors (Atom, CA, CBm, Quantum, Viking), Thunder PM torque motors, DUe/DUc/Fusion drive units, and control parts by order code.
Hägglunds Atom radial piston motors
Compact radial piston motor with 503–2513 cm³/rev displacement and a 60 mm through-hole shaft. It delivers up to 13.6 kNm torque, 400 rpm speed, and 394 kW power at 350 bar operating pressure. A 420 bar peak withstands shredder shock loads. Seal kits, pistons, and sensors are supplied.
- Displacement 503–2513 cm³/rev, 60 mm bore
- Torque up to 13.6 kNm, up to 400 rpm
- Power up to 394 kW, 420 bar peak pressure
- Seal kits, pistons & speed sensors
Hägglunds CA modular hydraulic motors
Modular radial piston motors with configurable displacement, cam rings, and pistons for harsh industrial environments. Proven in ATEX Ex Zone 2 tandem setups combining CA 210 and CA 70 units on refinery coke crushers and conveyors. Replacement cam rings, pistons, distribution valves, and seals.
- Configurable displacement & cam rings
- Tandem CA 210 + CA 70 drive packages
- ATEX Ex Zone 2 harsh-duty options
- Cam rings, pistons, valves & shaft seals
Hägglunds CBm high-torque motors
Hägglunds CBm radial piston motor delivers the highest torque-to-weight ratio for heavy industrial and offshore direct-drive installations. Clamp-coupling sizes like CBm 3000 2400 reach 430,000–500,000 Nm on pulp drum washers. Spares cover clamp couplings, torque arms, pistons, and seals.
- Highest torque-to-weight ratio class
- CBm 3000 2400 at 430,000–500,000 Nm
- Direct shaft mounting without gearboxes
- Clamp couplings, torque arms & seals
Hägglunds Quantum radial piston motors
Tough, rugged radial piston hydraulic motor line offering a wide range of frame sizes and displacements for demanding marine and industrial drives. Shaft-mounted direct drive removes gearboxes while holding full torque from standstill. Distribution valves, cam rings, pistons, and shaft seal kits.
- Wide range of sizes and displacements
- Built for marine & heavy industrial duty
- Full torque from standstill on shaft
- Valves, cam rings, pistons & seal kits
Hägglunds Viking hydraulic motors
Engineered for precise torque control regardless of rotational speed, Hägglunds Viking hydraulic motors deliver reliable continuous-duty operation. Proven for decades on pulp wash presses, winches, and heavy process machinery. Replacement piston kits, distributor sleeves, bearings, and seal sets.
- Torque control regardless of shaft speed
- Continuous-duty pulp press & winch drives
- Multi-decade service life in harsh mills
- Piston kits, sleeves, bearings & seals
Hägglunds Thunder electric torque motors
Permanent magnet synchronous torque motor enabling a fully electric gearless Hägglunds direct drive system. Delivers up to 200 kNm nominal torque, 4300 kW power, 30–300 rpm variable speed, and 200% overload for 60 seconds. Encoders, bearings, cooling units, and terminal components are available.
- PM synchronous gearless electric drive
- Up to 200 kNm nominal torque, 4300 kW
- Variable speed 30–300 rpm via inverter
- 200% overload for 60 s, encoders & cooling
Hägglunds DUe, DUc & Fusion drive units
Modular DUe drive units in six sizes and compact DUc units up to 1000 kW power hydraulic motors in industrial applications. Hägglunds Fusion mounts motor, pumps, and cabinet on the torque arm with internal splines or shrink-disc coupling. Spare SP pumps, valves, and filters.
- DUe drive units in six modular sizes
- Compact DUc drive units up to 1000 kW
- Fusion torque-arm all-in-one drive unit
- SP pumps, valves, filters & heat exchangers
Spider, ICp, CMp & QECC control systems
Spider control system and ICp pump driver cards provide flexible pump regulation, while Inside Intelligence CM/CMp delivers remote condition monitoring. The IP65 PLd Cat 3 QECC quick-stop unit powers two VQCC 800 valves. Spare ICp cards, safety relays, F1–F10 fuses, and solenoids.
- Spider control & ICp pump driver card
- Inside Intelligence CM & CMp monitoring
- QECC PLd Cat 3 unit for 2 VQCC 800 valves
- ICp boards, relays, F1–F10 fuses & solenoids
Direct drive engineering by Hägglunds Drives (Bosch Rexroth)
Hägglunds Drives (part of Bosch Rexroth AB, Sweden) engineers heavy-duty hydraulic and electric direct drive systems combining a shaft-mounted motor, a flexibly located DUe or DUc drive unit, and Spider electronic controls.
Direct shaft mounting eliminates gearboxes, heavy foundations, and intermediate couplings while delivering full torque from zero speed at operating pressures up to 350 bar and shock-load peaks up to 420 bar.
Motor series, power units, and intelligent monitoring
The lineup spans compact Atom motors (up to 13.6 kNm, 400 rpm, 394 kW), modular CA motors (including ATEX Ex Zone 2 CA 210 + CA 70 tandems), high-torque-density CBm (e.g. CBm 3000 2400 at 430,000–500,000 Nm), Quantum, Viking, and PM electric Thunder drives up to 200 kNm and 4300 kW.
Modular DUe drive units (six sizes) and compact DUc units (up to 1000 kW) pair with Fusion torque-arm systems, ICp pump driver cards, CM/CMp condition monitoring, and QECC PLd Cat 3 quick-stop units.
Hägglunds Drives and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hägglunds Drives and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Apex Hydraulics
- Equipment and parts for 3B Filters
- Equipment and parts for HAFNER Pneumatik
- Equipment and parts for Habermann Aurum Pumpen
Documents and sources
- Hägglunds Drive Solutions (Bosch Rexroth AG) — direct drive overview
- Datasheet RE 15354 — Hägglunds Atom radial piston hydraulic motor
- Hägglunds Atom product page — compact motor up to 400 rpm and 420 bar peak
- Bosch Rexroth case study — Hägglunds CA 210 and CA 70 tandem motor in Ex Zone 2
- Bosch Rexroth case study — Hägglunds CBm 3000 2400 clamp coupling motor (430–500 kNm)
- Bosch Rexroth case study — Hägglunds Viking motors and CMp monitoring on wash presses
- Hägglunds Thunder product page — PM synchronous electric torque motor up to 4300 kW
- Hägglunds Drive Units — DUe, DUc, Spider and ICp control systems
- Hägglunds Fusion product page — torque-arm mounted all-in-one drive system
- Hägglunds Inside Intelligence — CM and CMp condition monitoring solutions
- Datasheet RE 15370 — Hägglunds QECC quick stop electronic control
- Hägglunds Original Service — drive repairs, SP pump upgrades, and spare parts
