Hiton Special Valve (Zhejiang Hiton / Haidun) — Control & Knife Gate Valves
Industrial valves and pneumatic actuators from Zhejiang Hiton Special Valve Co., Ltd. (Haidun): VQ series V-port segment ball valves, HPZ, HCPZ, and HFPZ knife gate valves, HQ trunnion ball valves, and ZS, AT, AW actuators for pulp, mining, chemical, and water plants.
VQ Series Flange Segment Ball Valves
Hiton VQ flange segment ball valves (DN 25–500, PN 10–63, ANSI 150–600) handle equal-percentage throttling in pulp and water lines. The V-notch ball shears fibers and solids cleanly. Replaceable SS+STL, PCTFE, and PEEK seats and ground stems simplify service.
- DN 25–500 / NPS 1"–20"
- PN 10–63 / ANSI 150–600
- Metal seat -29…+450 °C
- SS+STL, PCTFE, PEEK seats
VQ Series Wafer Segment Ball Valves
VQ wafer V-port ball valves (DN 25–250, PN 10–63, ANSI 150–600) use an integral body to eliminate split-body leak paths. Hard chromium, nitriding, and HCOF coatings protect the notched ball against wear. Pressure-energized spring seats and stems are replaceable.
- DN 25–250 / NPS 1"–10"
- Integral wafer body
- Resilient seat -29…+150 °C
- Chrome / nitriding / HCOF
HPZ Series Unidirectional Knife Gate Valves
HPZ unidirectional wafer knife gate valves (DN 50–600, MSS SP-81) shut off slurry and fibrous media with a beveled chrome-plated gate. Guide claws replace bottom grooves to prevent clogging. Side-entry preloaded seats (EPDM, Viton, PTFE, NBR) and thrust bearings are serviceable.
- DN 50–600 / NPS 2"–24"
- 10 / 7 / 4 bar per MSS SP-81
- EPDM 120 °C / Viton & PTFE 200 °C
- Side-entry replaceable seat
HCPZ Series Through-Conduit Knife Gate Valves
HCPZ bi-directional wafer knife gate valves (DN 50–600) feature a through-going O-port plate for high-consistency stock. Dual side-entry seats with retainers seal flow in both directions without flushing wear. Hard chrome gates, seats, and top/bottom packing are replaceable.
- DN 50–600 / NPS 2"–24"
- Bi-directional dual-seat seal
- Hard chrome O-port gate
- Top & bottom gland packing
HFPZ Series Round & Square Port Knife Gate Valves
HFPZ wafer knife gate valves (DN 100–600, NPS 4"–24") pair a round inlet with a wider square outlet to prevent bridging in pulper traps, high-density cleaners, and silo chutes. Guide claws prevent pocket buildup. Chrome-coated gates, seats, and thrust bearings are serviceable.
- DN 100–600 / NPS 4"–24"
- Round inlet / square outlet
- Pulper traps, HDC & silo duty
- Side-entry replaceable seats
Bidirectional, Bonneted & Slurry Knife Gate Valves
Hiton supplies bidirectional, high-temperature bonneted (-29…+800 °C), and heavy-slurry knife gate valves in DN 50–600 (10/7/4 bar, MSS SP-81). Bodies use iron, carbon steel, stainless steel, or alloys. Chrome-plated gates, elastomer seats, and packings are replaceable.
- DN 50–600 / MSS SP-81
- Bonneted body up to +800 °C
- Slurry duty up to +200 °C
- EPDM, Viton, PTFE, NBR seats
HQ Series Trunnion Mounted Ball Valves
HQ series trunnion mounted ball valves (DN 25–500, PN 10–40, ANSI 150/300) operate from -29 to +220 °C with Class V/VI tightness per EN 558-12 and GB/T 12221. Carbon, stainless, or alloy bodies use spring-preloaded SS, PEEK, PTFE, or Devlon seats and anti-blowout stems.
- DN 25–500 / NPS 1"–20"
- PN 10–40 / ANSI 150–300
- Class V/VI, -29…+220 °C
- SS, PEEK, PTFE, Devlon seats
ZS Series Pneumatic Actuators & AT / AW Cylinders
Hiton ZS series (DA) crank-arm piston pneumatic actuators convert linear cylinder force into high-precision quarter-turn rotation with low deadband. Designed for V-port, trunnion, and butterfly valves alongside AT and AW cylinders. Piston seals, bushings, and couplings are replaceable.
- Crank-arm piston drive ZS (DA)
- 90° quarter-turn, low deadband
- Actuator lines ZS, AT, AW
- Piston seal & bushing kits
Selecting Between VQ Segment Ball Valves and HQ Trunnion Ball Valves
Hiton VQ series V-port segment ball valves (DN 25–500, PN 10–63, ANSI 150–600) combine equal-percentage flow control with strong shearing action for fibrous pulp, paper stock, and particle-laden streams.
Metal seats cover -29 to +450 °C (Class IV), while resilient seats handle -29 to +150 °C (Class VI).
HQ series trunnion mounted ball valves (DN 25–500, PN 10–40, ANSI 150/300) provide tight Class V/VI isolation from -29 to +220 °C with spring-preloaded SS, PEEK, PTFE, or Devlon seats built to GB/T 12221-2005, ISO 5725, and EN 558-12.
Choosing Knife Gate Architectures: HPZ, HCPZ, HFPZ, and Bonneted Series
HPZ unidirectional wafer valves (DN 50–600, 10/7/4 bar per MSS SP-81) use bottom guide claws instead of grooves to eliminate media packing. HCPZ through-conduit valves add a chrome-coated O-port plate and dual retainer-protected seats for bi-directional high-consistency flow.
HFPZ round-to-square port valves (DN 100–600) prevent bridging under pulper junk traps, high-density cleaners (HDC), and silo outlets, while bonneted designs extend operating range up to +800 °C.
Actuator Integration with ZS, AT, and AW Pneumatic Series
The ZS series (DA) crank-arm piston pneumatic actuator converts linear cylinder thrust into quarter-turn rotation with minimal return difference and deadband, matching finely ground VQ stems and anti-blowout HQ stems.
Hiton pairs valves with ZS, AT, and AW pneumatic actuators as well as bevel gear and electric drives sized to differential pressure, seat preload, and line temperature.
Hiton Special Valve and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hiton Special Valve and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for 3Z Corporation
- Equipment and parts for HAFNER Pneumatik
- Equipment and parts for Habermann Aurum Pumpen
- Equipment and parts for 3B Filters
Documents and sources
- Zhejiang Hiton Special Valve Co., Ltd. — Official Website
- Hiton Special Valve (Haidun) — Company Profile
- Flange Segment Ball Valve (VQ Series) Datasheet
- Wafer Segment Ball Valve (VQ Series) Specifications
- HPZ Series Unidirectional Pneumatic Knife Gate Valve
- HCPZ Series Through-Conduit Knife Gate Valve
- HFPZ Series Round & Square Port Knife Gate Valve
- HQ Series Trunnion Mounted Ball Valve
- ZS Series Pneumatic Actuator (DA)
- Bidirectional Knife Edge Gate Valve (MSS SP-81)
- Pneumatic Bonneted Knife Gate Valve (-29…+800 °C)
- Slurry Knife Gate Valve Specifications
- Zhejiang Hiton Special Valve (hitonsv.cn) Chinese Profile
