IWZ GmbH / IWZ Industriebedarf Wilhelm Zastera Industrial Equipment

Thermal control units (90–160 °C), chillers, OPTI-MIX gravimetric dosing, modular automation cells, IWZ VISION .THX, recycling extruders, cutting mills, and IWZ DA/DAI melt pressure sensors.

Water Temperature Control Units up to 160 °C

Water units regulate mold and calender circuits in molding and extrusion. TT-108 E, TT-118 K, TT-168 PHE, TT-168 EH, TT-170 L, TT-180 E, TT-181 E, TT-188 E, and TT-1500 W pair with IRIS control. Service parts cover pumps, heaters, valves, and heat exchangers.

  • Max 90 / 130 / 140 / 160 °C
  • TT-108 E to TT-1500 W models
  • Tool-Temp IRIS controller
  • Pumps, heaters, plate exchangers

Oil Thermal Units & Industrial Chillers

Oil-operated, special thermal units, and L&R cooling systems stabilize high-temperature molds and hydraulic circuits. Cooling modules cover −25 to 0 °C and 10 to 40 °C operating bands in polymer processing. Replaceable assemblies include high-temp seals, circulation pumps, compressors, and filters.

  • Cooling −25..0 °C & 10..40 °C
  • Oil & special thermal units
  • L&R refrigeration systems
  • Shaft seals, pumps, compressors

OPTI-MIX Gravimetric Dosing & Mixers

Gravimetric and volumetric dosing units blend virgin resin, regrind, masterbatch, and additives for extrusion and molding. The TSM range spans OPTI-MIX 50 to 3000 alongside OPTI-BLEND, OPTI-EX, and OPTI-FEED. Service parts cover load cells, slide gates, dosing screws, and stepper drives.

  • OPTI-MIX 50 to OPTI-MIX 3000
  • OPTI-BLEND, OPTI-EX, OPTI-FEED
  • Gravimetric & volumetric dosing
  • Load cells, dosing screws, gates

Material Dryers, Conveyors & Loaders

Handling and drying units move bulk resin and molded parts using Crizaf and Müller assemblies. Equipment covers desiccant wheel dryers, blowers, vacuum loaders, turntables, and roller separators. Spares include filter cartridges, belts, hoses, and valves.

  • Vacuum loaders & side-channel blowers
  • Desiccant & dry-air resin dryers
  • Crizaf belts & part separators
  • Filter cartridges, belts, hoses

Modular Automation & Linear Robotics

IWZ automation cells integrate custom gantries, grippers, and Sytrama / Roboline linear robots for molding lines. Modular units cover Cell-Systems, Portal-Systems, and Storage-Systems plus workstations. Spares span pneumatic grippers, servo drives, suction cups, and cables.

  • Cell, Portal & Storage Systems
  • Sytrama / Roboline linear robots
  • End-of-arm tooling & fixtures
  • Servo drives, grippers, cables

IWZ VISION .THX & Inspection Systems

Optical inspection units IWZ VISION .THX and testing benches verify part dimensions and defects inline. Solutions connect directly into turnkey cells from part extraction to tray stacking. Service parts include vision cameras, LED illuminators, encoders, and I/O modules.

  • IWZ VISION .THX optical inspection
  • Automated testing benches
  • Turnkey & logistic automation
  • Cameras, lighting, encoders

Granulators, Extruders & Melt Filtration

Recycling machinery processes sprues, thermoforming film, rubber scrap, and PET bottle flakes into reusable granulate. Systems cover bedside and central cutting mills, shredders, extruders, sorting plants, and Gneuss filters. Wear parts include rotor blades, screens, screw barrels, and filter belts.

  • Bedside & central cutting mills
  • PET flake & film extrusion lines
  • Gneuss melt filtration systems
  • Rotor knives, screens, screws

IWZ Melt Pressure Sensors & Manometers

IWZ measurement transducers monitor melt pressure and process temperature on extruder barrels and molding nozzles. The series covers DA, DAI, DTA, DTAI, DAP, DAIP, DAIL, DAIX, GMD/HPL, differential manometers, and dew point meters. Service items include sensors, thermocouples, and shielded cables.

  • IWZ DA / DAI / DTA / DTAI series
  • IWZ DAP / DAIP / DAIL / DAIX
  • Contact & differential manometers
  • Melt probes, thermocouples, cables

Thermal Control & Cooling Architecture

IWZ portfolio covers thermal units up to 160 °C, OPTI-MIX gravimetric dosing, Baukastensystem automation, and recycling extruders. Water temperature controllers (TT-108 E to TT-1500 W with IRIS regulation) cover 90, 130, 140, and 160 °C circuits alongside oil and special thermal units.

Industrial cooling systems and chillers cover −25 to 0 °C and 10 to 40 °C ranges for molding tools, calender rolls, and hydraulic stabilization.

Automation, Dosing, Measurement & Recycling

Modular automation cells (Cell-Systems, Portal-Systems, Storage-Systems), Sytrama / Roboline linear robots, and IWZ VISION .THX optical inspection integrate directly with injection molding and packaging lines.

Material preparation and recycling combine OPTI-MIX 50–3000 gravimetric mixers, desiccant dryers, bedside and central cutting mills, PET flake extrusion lines, Gneuss melt filtration, and IWZ DA / DAI / DTA / DTAI melt pressure sensors.

IWZ GmbH / IWZ Industriebedarf Wilhelm Zastera and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of IWZ GmbH / IWZ Industriebedarf Wilhelm Zastera and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.