HAFNER Pneumatik valves, cylinders, and manifolds

We source HAFNER Pneumatik solenoid and NAMUR valves, fieldbus valve terminals, ISO pneumatic cylinders, and air preparation units by part code and operating specs.

Solenoid valves

Pilot spool and direct-acting valves for 2/2, 3/2, 3/3, 5/2, and 5/3-way circuits, including G 1/8"–G 1/4" banjo-screw mounting. Ports M5 to G 3/4" and 4–8 mm push-in, IP67, SIL 3, and ATEX Zones 1, 2, 21, 22. Spare coils, Form A/B/C/M12 plugs, and seal kits.

  • 2/2, 3/2, 3/3, 5/2, 5/3-way types
  • Ports M5–G 3/4", push-in 4–8 mm
  • IP67, SIL 3 & ATEX Zones 1/2/21/22
  • Form A/B/C, M12 & 1/2" NPTF coils

NAMUR valves and blocks

NAMUR valves per VDI/VDE 3845 with NAMUR 1 (1/4") and NAMUR 2 (1/2") interfaces mount directly onto rotary process valve actuators. Functions include 3/2, 5/2, 5/3, and 3/2–5/2 flex at 650–3000 l/min. Spares cover purge, quick exhaust, redundancy, lock-up, and CBN 700 blocks.

  • VDI/VDE 3845 NAMUR 1 & 2 flanges
  • Air flow 650 to 3000 l/min
  • 3/2, 5/2, 5/3 & 3/2–5/2 flex ways
  • Purge, quick exhaust & CBN 700

Manifolds and valve terminals

Modular manifold systems in 10 mm and 16–30 mm valve widths for 3- and 5-way valves, including bottom-ported cabinet versions. Terminals integrate Sub-D, PROFINET, EtherCAT, CANopen, EtherNet/IP, and Modbus TCP. An optional shut-off screw supports hot-swap valve replacement during operation.

  • 10 mm & 16–30 mm manifold widths
  • Bottom-ported cabinet manifolds
  • Sub-D, PROFINET, EtherCAT, Modbus
  • Hot-swap valve shut-off screw

Manual and mechanical valves

Hand lever valves (G 1/8"–G 3/4") use metal sealing without a rubber gaiter and offer padlock-lockable designs for maintenance safety. Roller lever valves (M5, 4 mm, G 1/8"–G 1/4") offer ball bearings and idle return. Stem valves provide M16x1 and M22x1.5 panel threads.

  • Metal-sealed hand lever, G 1/8"–3/4"
  • Padlockable lever for maintenance
  • Roller valves with ball bearings
  • Panel stem threads M16x1, M22x1.5

Valves for extreme environments

Low-temperature pneumatic valves operate reliably down to -50 °C in rail and commercial vehicles, while high-temp versions reach +120 °C. Corrosion-resistant bodies use stainless steel A2 (AISI 304) and A4 (AISI 316L). ATEX Ex d/dm/e mb/ia/m and DIN EN 45545-2 / 61373 options apply.

  • Low-temperature rating down to -50 °C
  • High-temperature designs to +120 °C
  • A2 (AISI 304) & A4 (AISI 316L) steel
  • ATEX Ex d/dm/ia/m & DIN EN 45545-2

ISO and specialty pneumatic cylinders

Cylinders follow ISO 15552 (profile and tie-rod), ISO 6432, ISO 21287, and UNITOP in bore sizes from 10 mm to 320 mm and strokes up to 2800 mm. Piston rods use chromed Ck45 or AISI 304/316/420/1.4057 stainless steel for -40 °C to +150 °C. Lineup includes rodless and silo tapping units.

  • ISO 15552, ISO 6432, ISO 21287, UNITOP
  • Bores 10–320 mm, strokes to 2800 mm
  • Ck45 & AISI 304/316/420/1.4057 rods
  • Range -40 °C to +150 °C, tapping type

Compressed air preparation

Modular Futura, Classic Line A, and Metal Line assemblies cover filters, regulators, lubricators, and full maintenance units from 140 to 30,000 l/min. Filtration grades span 0.01, 0.3, 5, and 20 micron plus activated carbon with G 1/8"–G 1" ports. Pressure boosters and PN 411 711 SR switches.

  • Futura, Classic Line A & Metal Line
  • 0.01, 0.3, 5, 20 micron & carbon
  • Flow capacity 140–30,000 l/min
  • Pressure boosters & PN 411 711 SR

Fittings, function valves, and tubing

Push-in, push-on, compression fittings, quick couplings, stainless steel fixtures, and elbow/T/Y pipe joints for air networks. Function fittings cover uni- and bi-directional flow regulators, piloted non-return, quick exhaust, and silencers. Spiral and duo pneumatic tubes plus air blow guns.

  • Push-in, compression & quick couplings
  • Stainless steel fixtures & joints
  • Flow regulators & quick exhaust units
  • Spiral, duo tubes & air blow guns

European pneumatic engineering by HAFNER-Pneumatik

Based in Kornwestheim, Germany, HAFNER-Pneumatik Krämer GmbH & Co. KG has over 30 years of experience developing and manufacturing industrial valves, pneumatic cylinders, and air preparation equipment in Europe.

Standard port interfaces span M5 to G 3/4", NPT 1/4"–1/2", 4–8 mm push-in fittings, VDI/VDE 3845 NAMUR 1 (1/4") and NAMUR 2 (1/2") actuator flanges, plus ISO 15552, ISO 6432, ISO 21287, and UNITOP cylinders.

Fieldbus terminals and extreme operating ratings

Modular manifold systems (10 mm and 16–30 mm widths) and valve terminals integrate with Sub-D, PROFINET, EtherCAT, CANopen, EtherNet/IP, and Modbus TCP, including bottom-ported cabinet designs and optional hot-swap shut-off screws.

Harsh-duty options cover low-temperature valves down to -50 °C, high-temperature units up to +120 °C, A2 (AISI 304) and A4 (AISI 316L) stainless steel, ATEX Zones 1/2/21/22, SIL 3 (IEC 61508:2010), and DIN EN 45545-2 / 61373.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.