3Z Corporation (3Z Valve) Industrial Plug Valves — Series & Sizing
Engineering selection of 3Z Corporation (3Z Valve) South Korean industrial plug valves: DBB, 4-way diverter, sleeved, PFA-lined, metal-seated, jacketed, and lubricated series in Class 150-900 and sizes 0.5"-40".
Double Block & Bleed Plug Valves Fig. 124 / 324 / 624 / 924
Double block-and-bleed plug valves Fig. 124, 324, 624, and 924 (Class 150-900, 2" to 40") serve metering stations, tank farms, and marine loading terminals. Full bore FB models, 25 psi thermal relief bleed, and 17-4PH stems work with replaceable Viton, PFA, or NBR slips.
- Series: Fig. 124 / 324 / 624 / 924 and Full Bore FB
- Range: Class 150-900, 2"-40", 25 psi thermal bleed system
- Body & slips: A216 WCB / CF8M / LCB, A536 65-45-12 + MPC
- Replaceable parts: sealing slips, Viton/PFA/NBR seals, 17-4PH stem
4-Way Diverter Plug Valves Fig. 144 / 344 / 644 / 944
Four-way diverter plug valves Fig. 144, 344, 644, and 944 (Class 150-900, 3" to 20") support bi-directional meter proving at ~10 s cycle times. A patented ball-locking lifting mechanism avoids seal rubbing, while 2-5 psi differential gauges verify shutoff integrity.
- Series: Fig. 144 / 344 / 644 / 944 for bi-directional meter proving
- Range: Class 150-900, 3"-20", ~10 s cycling, 2-5 psi proof gauge
- Materials: WCB+Cr body, WCB+ENP plug, 17-4PH stem, A436 bushing
- Replaceable parts: slip seals (3"-8"), plug seals (10"-20"), Viton O-rings
Sleeved Plug Valves Fig. 120 / 130 / 320 / 120FB
Sleeved plug valves Fig. 120, 130, and 320 (Class 150-300, 0.5" to 28") provide zero dead space sealing with PTFE, RTFE, or 320EP sleeves. A threefold stem seal with delta ring, reverse lip, and AISI 316L diaphragm meets API 607 and ISO 15848 standards.
- Series: Fig. 120 / 130 (3-way) / 320 / 120FB / 320FB / 122 SW-BW
- Options: 250EP/320EP high-temp, nuclear UHMWPE (-29..100 C), caged
- Materials: WCB / CF8M / Hastelloy-C CW-12MW, CF8M plug
- Replaceable parts: PTFE/RTFE/320EP sleeve, delta ring, Grafoil seal
PFA Lined Plug Valves Fig. 121 / 321 & Check Valves Fig. 171 / 181
PFA-lined plug valves Fig. 121 and 321 (Class 150-300, 0.5" to 12") protect metal housings from corrosive chemicals at temperatures up to 204 C. Transfer-molded PFA locks into dovetail grooves, complemented by lined ball check Fig. 171 and swing check Fig. 181.
- Series: Fig. 121 / 321 / 131 (3-way) / FB and check Fig. 171 / 181
- Range: Class 150-300, 0.5"-12", PFA rating 204 C, NACE & vacuum
- Materials: WCB / CF8M / CW-12MW, transfer-molded PFA, AISI 304
- Replaceable parts: PFA-lined plug, RTFE delta/lip, Fig. 171 RTFE ball
Metal Seated Plug Valves Fig. 123P / 323P & Steam Jacketed FJ
Metal seated plug valves Fig. 123P, 323P, 623P FB, and 923P FB (Class 150-900, 0.5" to 24") handle extreme high and low temperatures. A ball-locking operator lifts the plug before 90-degree rotation to prevent galling, with purge ports and FJ steam jackets.
- Series: Fig. 123P / 323P / FB up to 923P FB, jacketed 123P FJ / 323P FJ
- Range: Class 150-900, 0.5"-24", seat purging and full/partial jackets
- Materials: WCB / CF8M+Stellite / A217 C12, hardened A217 CA15 plug
- Replaceable parts: CA15/Stellite plug, Type 410 stem, Graphite+316 SWG
Lubricated & Hard Surfaced Plug Valves, Operators & Long Stems
Lubricated plug valves serve crude oil and natural gas transmission lines via sealant injection between plug and housing. Nickel or cobalt hard surfacing protects against coal and ore slurries, paired with worm gears, AOV/MOV actuators, and L100-L2000 stems.
- Applications: crude oil and gas pipelines plus abrasive mineral slurries
- Wear protection: nickel and cobalt alloy hard surfacing on plug and seat
- Operators: wrench (0.5"-4"), worm gear (6"-40"), pneumatic/motor AOV/MOV
- Assemblies: L100-L2000 long stems, proximity limit switches, bare stem
Valve architecture and process media selection
Selecting 3Z Corporation (3Z Valve) plug valves depends on shutoff mechanism, temperature, and fluid chemistry. Double block-and-bleed valves (Fig.
124, 324, 624, 924, up to 40") deliver no-abrasion slip sealing and 25 psi thermal cavity relief for metering skids, tank farms, and loading arms, while 4-way diverter valves (Fig. 144, 344, 644, 944) support ~10 s bi-directional meter proving with 2-5 psi seal integrity verification.
Sleeved plug valves (Fig. 120, 130, 320) eliminate body dead space via confined PTFE, RTFE, 250EP/320EP, or nuclear UHMWPE sleeves with API 607 fire-safe top seals. Transfer-molded PFA-lined valves (Fig. 121, 321) resist aggressive acids up to 204 C, whereas metal-seated Fig.
123P / 323P valves with ball-locking lift-turn operators, seat purge ports, and FJ steam jackets handle extreme temperatures and solidifying fluids.
Materials, end connections, and actuation
With manufacturing at Sihwa and an in-house alloy foundry in Gimpo, South Korea, 3Z Corporation builds housings and trims in ASTM A216 WCB/WCC, A351 CF8M/CF3M, low-temperature A352 LCB, high-temperature A217 C12, and Hastelloy-C A494 CW-12MW.
Lubricated and nickel/cobalt hard-surfaced plug valves serve crude pipelines and abrasive coal, limestone, or ore slurries.
Available configurations span ANSI/ASME, DIN, and JIS raised face (RF) or ring type joint (RTJ) flanges, plus socket-weld, butt-weld, and NPT ends (Fig. 122S/322S/122/322).
Operators cover hand levers (0.5"-4"), worm gearboxes (6"-40"), pneumatic or electric actuators (AOV/MOV), proximity switches, and extended stems from L100 to L2000.
3Z Corporation and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of 3Z Corporation and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HANLA IMS
- Equipment and parts for Hangzhou Xinglong Pump
- Equipment and parts for Zander Aachen
- Equipment and parts for Zander EMS
Documents and sources
- 3Z Corporation — Management message and global valve applications
- 3Z Corporation — Company history and industry registrations
- 3Z Corporation — Office, manufacturing plant and 3Z Metal foundry
- 3Z Corporation — Double Block and Bleed and 4-Way Diverter Plug Valves
- 3Z Corporation — Double Block & Bleed Plug Valves Catalogue (PDF)
- 3Z Corporation — 4-Way Diverter Plug Valves Catalogue (PDF)
- 3Z Corporation — Sleeved Plug Valve engineering overview
- 3Z Corporation — Sleeved Plug Valves Catalogue (PDF)
- 3Z Corporation — Lined Plug Valve and lined check valves
- 3Z Corporation — Lined Plug Valves Catalogue (PDF)
- 3Z Corporation — Metal Seated and Jacketed Plug Valves
- 3Z Corporation — Metal Seated Plug Valves Catalogue (PDF)
- 3Z Corporation — Lubricated and Hard Surfaced Plug Valves
- 3Z Corporation — Official technical catalogue library
- 3Z Corporation — Compliance records (API 6D, ISO 9001, CE-PED, SIL, TR CU)
