Hangzhou Xinglong Pump (Xinglong Pump) — industrial screw pumps & macerators
Single screw (G), twin-screw (XS, high-pressure, multiphase), three-screw pumps (SN, SM, SPF, 3G), inline macerators, and skid packages from Hangzhou Xinglong Pump (Xinglong Pump) for oil, chemical, power, and wastewater lines.
Bearing-housing and direct-coupled single screw pumps
Bearing-housing and direct-coupled single screw pumps handle viscous, abrasive, and fibrous media at capacities up to 600 m³/h and discharge pressures up to 48 bar. Close-coupled gearmotor models deliver up to 400 m³/h at 24 bar. Wetted rotors use 304/316, duplex steel, Hastelloy, or titanium.
- Capacity up to 600 m³/h
- Pressure up to 48 bar
- 6 stator elastomer grades
- Gland or mechanical seal
Metering and sanitary single screw pumps
Pin-joint metering pumps with multi-stage rotors dose fluids down to 0.03 L/h at ±1% accuracy and 24 bar up to 20,000 mPa·s. Sanitary units feature polished stainless wetted parts with dead-zone-free flow paths, food-grade stators, and CIP/SIP bypass ports up to 150 m³/h.
- Dosing from 0.03 L/h (±1%)
- Sanitary flow to 150 m³/h
- Viscosity to 20,000 mPa·s
- CIP and SIP bypass ports
General-purpose and high-pressure twin-screw pumps
General and XS twin-screw pumps operate with non-contact screw sleeves and liners, tolerating brief dry running without metal-to-metal galling. Single-suction units reach 72 m³/h at 16 bar with optional heating jackets, while high-pressure balanced models deliver 600 m³/h at 40 bar.
- High pressure 600 m³/h, 40 bar
- General type 72 m³/h, 16 bar
- Non-contact screw sleeves
- Cartridge seal and jacket
Multiphase twin-screw pumps for gas-liquid streams
Multiphase twin-screw pumps transfer unseparated crude oil, water, and gas directly from wellheads without separators or compressors. An integrated liquid recirculation chamber stabilizes operation up to 97% gas volume fraction, delivering 200 m³/h at 25 bar discharge and 4 bar inlet.
- Gas fraction GVF to 97%
- Capacity up to 200 m³/h
- Discharge up to 25 bar
- API seal flush and lube
SN and SM series three-screw pumps
SN40–SN9400 and SM40–SM2900 pumps move lubricating oils, fuels, and bitumen at 1–760 cSt with nitrided steel screws. Their symmetrical body rotates 180° to reverse flow, while 36°–54° helix angles tune output. U2, E6.7, and E15 bellows seal layouts support temperatures up to 250 °C.
- SN up to 9400 L/min, 40 bar
- SM to 2900 L/min, 100 bar diff
- Temp up to 250 °C (E15)
- Helix angles 36° to 54°
3G and SPF / XSPF three-screw pumps
Internal-bearing 3G20–3G180 pumps cover flows up to 7400 L/min and pressures to 80 bar at 1–760 cSt and 120 °C, with 90° rotatable flanges on small sizes. Inline-flanged SPF20 and SPF40 models deliver up to 48 L/min at 25 bar and 250 °C with optional serviceable suction strainers.
- 3G up to 7400 L/min, 80 bar
- SPF up to 48 L/min, 25 bar
- 90° adjustable 3G flanges
- Optional inline filter on XSPF
Single-shaft and twin-shaft inline macerators
Inline macerators shred fibers, plastics, rags, and solids upstream of screw pumps to prevent rotor-stator jamming and pipeline blockage. High-chromium alloy steel seven-blade cutter stacks and counter-rotating twin shafts combine low-speed high-torque shearing with heavy-object separation.
- Single and twin-shaft units
- 7-blade cutter geometry
- High-chromium alloy discs
- Heavy-solid trap protection
Skid-mounted single screw pump packages
Factory pre-piped skid packages integrate duty and standby single screw pumps, manifolds, flowmeters, relief valves, pressure gauges, and optional PID control panels on one frame. Rated up to 300 m³/h and 48 bar, the skids handle slurries with up to 20% solids.
- Skid capacity to 300 m³/h
- Pressure up to 48 bar
- Up to 20% solids handling
- Duty/standby + PID option
Selection matrix for Hangzhou Xinglong Pump (Xinglong Pump) screw pumps
For sludges, slurries, coal-water mixtures, and viscous pastes up to 20,000 mPa·s, single screw G-series units provide bearing-housing builds up to 600 m³/h and 48 bar, compact gearmotor drives up to 400 m³/h and 24 bar, ±1% dosing from 0.03 L/h, and polished CIP/SIP sanitary designs up to 150 m³/h.
For non-lubricating, corrosive, or gas-entrained streams, non-contact twin-screw series (general 72 m³/h, high-pressure 600 m³/h at 40 bar, and multiphase GVF up to 97%) eliminate metal-to-metal contact.
Clean lubricating oils, fuels, and bitumen (1–760 cSt) run on SN, SM, SPF, and 3G three-screw pumps.
Wetted metallurgy, stator elastomers, and shaft sealing layouts
Stator compounds cover NBR, EPDM, CSM, PTFE, FPM, and HNBR, paired with rotors in tool steel, 304/316 stainless steel, duplex stainless, Hastelloy, or titanium alloy. Three-screw rotors receive nitriding treatment above HRC 60 for extended wear resistance.
SN and SM series offer U2 internal-bearing seals up to 80 °C, E6.7 external-bearing seals up to 150 °C, and E15 metal bellows seals up to 250 °C, with 180° reversible bodies and 36°–54° helix angles tuned at 1450 rpm.
Manufacturing tolerances and factory testing at Hangzhou Xinglong Pump Co., Ltd.
Founded in 1998 in Pingyao, Hangzhou on a 15,000 m² site (11,000 m² R&D and manufacturing), the company is a CNPC tier-1 vendor and co-drafter of Chinese pump standards JB/T 8644-2017, HJ 2524-2012, JB/T 12798-2016, and GB/T 10886-2019.
CNC machining holds 0.01 mm component accuracy and 0.02 mm rotor mesh clearance for over 92% volumetric efficiency, followed by 72-hour no-load run-in and 24-hour load testing with vibration kept below 2.5 mm/s.
Hangzhou Xinglong Pump and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hangzhou Xinglong Pump and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Hangzhou Denice Machinery
- Equipment and parts for AirTAC
- Equipment and parts for ZAE AntriebsSysteme
- Equipment and parts for BYCON
Documents and sources
- Hangzhou Xinglong Pump Co., Ltd. official home — standards and pump lines
- Company profile — plant scale, CNPC tier-1 supplier, screw pump standards
- Single screw pump series catalog (G, SN, SM, SPF, SMT, 3G)
- Bearing-housing single screw pump specs (up to 600 m³/h, 48 bar)
- Direct-coupled single screw pump specs (up to 400 m³/h, 24 bar)
- Metering single screw pump specs (from 0.03 L/h, ±1% accuracy)
- Sanitary single screw pump with CIP/SIP (up to 150 m³/h, 24 bar)
- General single-suction twin-screw pump specs (up to 72 m³/h, 16 bar)
- High-pressure twin-screw pump specs (up to 600 m³/h, 40 bar)
- Multiphase twin-screw pump specs (GVF up to 97%, 200 m³/h, 25 bar)
- SN series three-screw pumps (SN40–SN9400, up to 250 °C)
- SM series three-screw pumps (SM40–SM2900, 100 bar theoretical diff)
- SPF/XSPF three-screw pumps (SPF20–SPF40, up to 48 L/min, 25 bar)
- 3G series three-screw pumps (3G20–3G180, up to 7400 L/min, 80 bar)
- Twin-shaft industrial macerator with hardened alloy discs
- Skid-mounted single screw pump package specs (up to 300 m³/h, 48 bar)
- Manufacturer technical guide on screw pump spare parts selection
- Machining tolerances (0.01/0.02 mm), HRC 60+ nitriding, and 72h+24h test
- Official factory address and technical support contacts
