H. Hermann Ehlers (H. Hermann Ehlers GmbH) Industrial Flow & Valve Equipment
Industrial flow meters, viscosity control systems, batching electronics, precision and cryogenic control valves, Dudek gear pumps, and KSF strainers from H. Hermann Ehlers GmbH.
Ring-Piston & Oval-Gear Flow Meters
CONTOIL VZF3, VZO, IOG, LM OG, and BM/LBM flow meters measure diesel, heavy fuel oil, and lubricants across DN 15 to DN 250 at temperatures up to 180 °C and pressures up to 40 bar. Modbus RTU and VEGA 2 registers are supported. Spares include chambers, pistons, gears, and RE sensors.
- DN 15–250 · up to 180 °C, 40 bar
- CONTOIL VZF3 with Modbus RTU
- IOG Low Flow and LM OG to 115 l/min
- VEGA 2 registers and RE sensors
Ultrasonic Flow & Thermal Energy Meters
FLUXUS F601, F631, F532, TFX 5000, FLOWMAX 40i/400i, UHC100, and Multical 603 meters measure water, thermal fluids, and aggressive media. Pipe sizes span 6 to 6500 mm, handling up to 3% solids in TFX 5000. Spares cover clamp-on sensors up to 200 °C, Pt100/Pt500 probes, cables, and gel.
- FLUXUS F631 · pipes 6–6500 mm
- TFX 5000 · up to DN 1200, 12 m/s
- FLOWMAX 400i · up to 80 °C
- Pt100/Pt500 probes and acoustic gel
MID Magmeters, Turbines & Rotameters
Electromagnetic MID M1000–M5000 (Typ II, III Wafer, Food), VISION 1000–3012 turbines, Woltmann PMK/KMS/WPD-FS, and Hedland meters handle water, chemicals, and oils. Ratings reach DN 4–1400 and PN 100, plus Niagara to 300 bar. Spares include turbine rotors, inserts, and MID electronics.
- MID Typ II · DN 4–1400, PN 100
- M3000/4000 · ATEX Zone 1 and 2
- VISION 1000 · 0.1–2.5 l/min
- Niagara · up to 300 bar at 65 °C
Viscosity Control & Batching Electronics
VAF Viscotherm V-92 (VC) and N 410, FMS, F 110, D421.3, and CALEC ST electronics manage fuel viscosity and liquid batching. V-92 covers 0–25/50/200 mPa·s at DN 50 PN 40 and up to 200 °C within ±2%. Spare parts include capillary assemblies, gear pumps, IP55/Ex motors, boards, and displays.
- Viscotherm V-92 · up to 200 °C, ±2%
- N 410 & FMS · up to 4 dispensing points
- D421.3 · ±0.01% frequency accuracy
- CALEC ST and DCMTRT data logger
Control, Cryogenic & Pinch Valves
OR900/OR910, RC 200/210/230/260, ReCo PVDF/PVC control valves, Typ 8011 regulators, and Tideflex TF 1/TF 2/SL13 and Typ A/R pinch valves handle steam, cryogenics, and slurries. Ratings span -270 to +538 °C and up to PN 340. Spares include trims, rubber sleeves, diaphragms, and MC 100 actuators.
- OR900/OR910 · up to 50 bar, +538 °C
- RC 200–260 · up to PN 340, -270 °C
- Typ 8011 · DN 15–125, PN 16/40
- Tideflex and Red Valve Typ A/R
Gear Pumps, Basket Strainers & Butterfly Valves
Dudek I/A–VI/A gear pumps (with optional heating jacket), KSF basket strainers, and BV/BV 10-2366 butterfly valves handle crude oil, lubricants, alkalis, and paints. Pumps span DN 32–150 up to 120 m³/h; strainers DN 15–600 to PN 25. Spares cover KSF baskets, gear sets, shafts, bearings, and seals.
- Dudek I/A–VI/A · 0.08–120 m³/h
- KSF strainers · DN 15–600, PN 6–25
- GGG-50 iron and RG10 bronze bodies
- BV 10-2366 valves per EN 558
Flow Measurement & Viscosity Control Portfolio
For diesel, heavy fuel oil (HFO), and industrial lubricants, H. Hermann Ehlers supplies CONTOIL VZF3, VZO, VZOA, and VZF II ring-piston meters, IOG and LM OG oval-gear meters, and BM/LBM sliding-vane bulkmeters (DN 80–250) paired with VEGA 2 registers.
Fuel viscosity up to 200 °C is managed in-line by VAF Viscotherm V-92 systems.
For water, thermal energy, corrosive chemicals, and slurries, the portfolio covers clamp-on and inline ultrasonic meters (FLUXUS F601/F631/F532, TFX 5000, FLOWMAX 40i/400i, UHC100, Multical 603) alongside electromagnetic MID M1000–M5000 transmitters up to DN 1400 and PN 100.
Valves, Gear Pumps, Strainers & Batching Electronics
Process and cryogenic regulation is covered by OR900/OR910 (up to +538 °C), RC 200/210/230, cryogenic RC 260 (down to -270 °C, up to PN 340), ReCo PVDF/PVC valves, Typ 8011 sliding-gate pressure regulators, and Tideflex / Red Valve pinch and check valves.
Dudek I/A–VI/A gear pumps (0.08–120 m³/h), KSF basket strainers (DN 15–600, GGG-50 or RG10), BV 10-2366 butterfly valves, and N 410, FMS, F 110, D421.3, and CALEC ST electronics complete fluid transfer and dosing loops.
H. Hermann Ehlers and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of H. Hermann Ehlers and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Apex Hydraulics
- Equipment and parts for Ametherm
- Equipment and parts for Alfred Schütze Apparatebau
- Equipment and parts for Souriau / SOURIAU-SUNBANK
Documents and sources
- H. Hermann Ehlers GmbH official site — flow meters, electronics, and valves
- H. Hermann Ehlers Service & Consulting — flow measurement, control, and pumping
- Ring-piston oil and fuel meters CONTOIL VZF3, VZO, VZOA, VZF II, Braun HZ, ERO 4
- Oval-gear flow meters IOG, IOG Low Flow, and LM OG / LM OGI PVC
- Flow measurement overview: FLUXUS, FLOWMAX, MID, VISION, BM/LBM, Hedland, Recordall
- VAF Viscotherm V-92 viscosity control system (V92 series, VC electronic module)
- Display electronics, batch controllers, and converters: N 410, FMS, F 110, D421.3, CALEC ST
- Heat and cooling energy metering: UHC100, Multical 603 / Ultraflow, Pt100/Pt500 probes
- Control and cryogenic valves OR900/OR910, RC 200–260, ReCo, and Typ 8011 regulator
- Pinch and backflow check valves Red Valve Typ A, Typ R, and Tideflex TF 1, TF 2, SL13
- KSF basket strainers, BV butterfly valves, and pipeline accessories
- Dudek I/A–VI/A gear pumps with adjustable relief valve and heating jacket
