Alfred Schütze Apparatebau / SCHÜTZE Industrial Spray Valves & Equipment
Automatic pneumatic and electric spray valves (KA-2, ASV, MSV, MMFS, MMKD-40, S 830, EVV-2), hand spray guns (W 3 FZ-Duo, S 947, W 5), ZIP 52 diaphragm pumps, DG tanks, and DSV extensions from Alfred Schütze Apparatebau GmbH.
KA-2 and ASV Automatic Spray Valves
Compact KA-2, KA-2/HD, and stainless-steel ASV automatic spray valves deliver repeatable flat or round spray patterns for release agents, oils, paints, and adhesives. ASV features independent cone air regulation up to 90° flat spray. Precision nozzles, needles, and Viton seals are replaceable.
- KA-2/HD: up to 30 bar fluid
- ASV: max 10 bar, 3.5–6 bar air
- Nozzles ø 0.2–2.5 mm
- Quick-release adapter option
Mini & Special Valves MSV, MMFS, GF/6, GSD-1
Miniature MSV (60 g, 27 x 33 x 17.5 mm) and round-spray MMFS (10° jet) fit tight machine and robot spaces for oils, release agents, and marking inks. GF/6 handles abrasive or graphite media via dual flushing ports. Stainless GSD-1 meets EC 1935/2004 food standards up to 10 cycles/s.
- MSV: 60 g, 43 l/min, max 3 bar
- MMFS: 10° jet, ø 0.3–2.0 mm
- GF/6: dual flush ports, 6 bar
- GSD-1: food-grade, max 12 bar
Extrusion & Dispensing Valves MKDD, MMKD, VDV
High-speed extrusion valves MMKD-40, MKDD, MMDV, and volumetric VDV 25 apply glues, adhesives, oils, and sealants in continuous or intermittent beads. A directly flanged 5/2-way solenoid achieves up to 50 cycles/s at up to 100 bar. Tungsten carbide needles and stainless nozzles resist wear.
- MMKD-40: max 100 bar fluid
- Up to 50 cycles/s actuation
- Coils: 24 V/DC, 110/230 V/AC
- Nozzles ø 0.2–2.5 mm, Viton
Airless & Air-Assisted Valves S 830, AHDM
The S 830 airless automatic valve operates up to 250 bar material pressure with separate pneumatic opening and closing ports at min. 6 bar control air. Tungsten carbide needle and seat handle demanding fluids, paired with Viton and PTFE gaskets. AHDM HD-Mix and KA-2/Airless complete the range.
- S 830: max 250 bar material
- Tungsten carbide needle & seat
- Self-adjusting Viton/PTFE seals
- Compact 120 x 50 x 22 mm body
Electrical Application Valves EVV-2, ESV-2-IS
Electromagnetically actuated EVV-2 extrusion and ESV-2-IS spray valves open via solenoid coil and close via spring force without pneumatic needle actuation. EVV-2 reaches up to 350 Hz cycle rates at up to 25 bar pressure with ø 0.1–1.0 mm nozzles. Available in 6 V, 12 V, and 24 V versions.
- EVV-2: max 350 Hz cycle rate
- Material pressure max 25 bar
- Coil voltages: 6 V / 12 V / 24 V
- Orifice sizes ø 0.1–1.0 mm
W 3 FZ-Duo Release Agent Spray Guns
The W 3 FZ-Duo fine-spray hand gun (240 g) applies low-viscosity release agents in plastics moulding and foundry operations with uniform fine-droplet lay-on. Its blue anodized aluminum body feeds air and fluid through the handle via a duo-feed hose. Available in HVLP, ATEX, and KLS variants.
- Weight 240 g, nozzles ø 0.2–1.5 mm
- Fluid max 4 bar, air max 6 bar
- Air flow 90 l/min at 3 bar
- HVLP, ATEX & KLS versions
Manual Spray Guns S 947, W 1–W 7 & W 5
Modular S 947 spray guns convert between gravity cup (B), pressure feed (A), and syphon cup (S/K) setups with ø 0.3–3.5 mm stainless nozzles and PTFE seals. The range also includes W 1–W 7 spray guns, S 2-K two-component guns, S 720 airless guns, and W 5 blowguns with 50–250 mm pipes.
- S 947: nozzles ø 0.3–3.5 mm
- Modular B/A/S/K & HVLP setups
- W 1–W 7, S 2-K & S 720 guns
- W 5 blowguns: 50–250 mm pipes
ZIP 52 Pumps, DG Tanks & DSV Extensions
ZIP 52 double-diaphragm pumps (1:1 ratio) deliver up to 52 l/min at max. 7.8 bar with PTFE O-rings for wetted parts. Stainless DG 6, DG 9, and DG 18 pressure tanks operate up to 6 bar with safety valves. DSV needle-sealing nozzle extensions (e.g., D8 8 mm) provide 45°, 90°, and 360° radial spray.
- ZIP 52 pump: 1:1, 52 l/min, 7.8 bar
- DG tanks: 6 / 9 / 18 l, max 6 bar
- DSV extensions: 45°, 90°, 360°
- HD-MDR regulators & inline filters
How to Select Alfred Schütze Apparatebau Spray & Dispensing Systems
Selecting the right Alfred Schütze Apparatebau spray or extrusion system depends on material viscosity, operating pressure, cycle rate, and nozzle orifice size.
For low-viscosity release agents, oils, and paints on robots, compact KA-2, KA-2/HD (up to 30 bar), MSV, and stainless ASV valves provide repeatable atomization, while MMKD-40 (up to 100 bar, 50 cycles/s) and S 830 (up to 250 bar) handle high-viscosity adhesives and airless applications.
Continuous fluid delivery is built around ZIP 52 double-diaphragm pumps (up to 52 l/min) and stainless DG 6/9/18 pressure tanks, complemented by needle-sealing DSV nozzle extensions for deep cavities and internal surfaces.
Manufacturer Background & Homonym Disambiguation
Founded in 1927 by Alfred Schütze in Jena and operating from Bremen and Weyhe-Dreye since 1959, Alfred Schütze Apparatebau GmbH (SCHÜTZE) manufactures precision spray valves, hand spray guns, material pressure tanks, pumps, and nozzle extensions.
The company is distinct from industrial IBC packaging manufacturer Schütz GmbH & Co. KGaA (schuetz.net), Schütz Dental, and Schütz Messtechnik.
Alfred Schütze Apparatebau and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Alfred Schütze Apparatebau and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Souriau / SOURIAU-SUNBANK
- Equipment and parts for IZUMI MACHINE
- Equipment and parts for Albert Knoblinger
- Equipment and parts for Hällde
Documents and sources
- Official product catalog of Alfred Schütze Apparatebau GmbH
- Company profile and precision nozzle manufacturing
- Company history of Alfred Schütze Apparatebau since 1927
- Miniature automatic spray valve KA-2/HD (up to 30 bar)
- Automatic spray valve ASV with adjustable spray angle
- Mini spray valve MSV (60 g, stainless steel, Viton)
- Round-spray valve MMFS (10° spray angle)
- Automatic spray valve GF/6 for abrasive media
- Stainless spray valve GSD-1 for food industry (EC 1935/2004)
- Extrusion valve MMKD-40 (LV/KV) up to 100 bar
- Airless automatic spray valve S 830 (up to 250 bar)
- Electric full jet valve EVV-2 (up to 350 Hz)
- Fine-spray release agent gun W3 FZ-Duo
- Modular convertible spray gun S 947
- Industrial blowguns of series W 5
- Double-diaphragm pump ZIP 52 (up to 52 l/min)
- Stainless steel material pressure tanks series DG
- Needle-sealing nozzle extensions DSV D8
