IZUMI MACHINE Equipment & Industrial Spares
Japanese 2FW003–2FW150 friction welding machines, LA08V CNC vertical lathes, MCB80 NC center broaching machines, MSH40 transfer lines, assembly systems and spares.
Compact Friction Welders 2FW003–2FW010
Vertical and single-head models 2FW003VT, 2FW005HS-I, 2FW005US-I, and 2FW010HT weld bars from ø3 mm via NC spindle feed. Used for engine valves, stud bolts, and tools joining carbide to SUS201 or SS400 to SKH9. Spares include collet chucks, ball screws, and sensors.
- Models: 2FW003VT, 2FW005HS-I, 2FW010HT
- Mild steel bar capacity from ø3 mm
- Pairs: carbide×SUS201, SS400×SKH9
- Chucks, ball screws, linear rails
Medium Friction Welders 2FW030–2FW060
Single-head 2FW030HS, 2FW045HS, 2FW060HS and double-head 2FW030HS-XTC, 2FW045HS-XTC units weld propeller shafts, CV joints, and inflators. Vertical 2FW030VT and 2FW045VT save floor space. Spares cover burr-cutting units, disk brakes, clamp chucks, and loaders.
- Models: 2FW030, 2FW045, 2FW060HS
- Double-head XTC phase-aligned bonding
- Alloys: S45C, SCM435, SUS404×S35C
- Cutting device, disk brake, clamp jaws
Heavy Friction Welders 2FW080–2FW150
Hydraulic NC welders 2FW080HT, 2FW080HS-T, 2FW120HT, and 2FW150HT/HS with FW controllers join drill pipes AISI4145×AISI1340, piston rods, dead axles, and turbine shafts Inconel713C up to ø200 mm. Spares include hydraulic pumps, cylinders, rails, and steady rests.
- Models: 2FW080HT, 2FW120HT, 2FW150HT
- Mild steel bar capacity up to ø200 mm
- Drill pipes, piston rods, axle shafts
- Hydraulic pumps, cylinders, steady rests
LA08V CNC Vertical Lathe
The LA08V vertical lathe with an 8-inch chuck machines compressor housings, swash plates, and gears up to φ150 mm at 3,000 min-1. Rigid design keeps thermal drift within 20 μm without warm-up. Replacement items cover 8-inch chucks, 14 kW drives, touch sensors, and auto doors.
- Max diameter φ150 mm, 8-inch chuck
- Spindle speed 3,000 min-1, motor 14 kW
- Travel X 270 / Z 300 mm, drift ≤20 μm
- 8" chuck, touch sensor, loader units
MCB80 / MCB80L NC Center Broaching Machines
Zero-offset broaching machines MCB80 and MCB80L deliver 70 kN force up to 12.5 m/min with 1,000 mm or 1,500 mm stroke. An 11 kW motor drive stabilizes cycle time on companion flanges and gears. Spares cover φ55/φ36 mm chucks, ram drives, and chip conveyors.
- Cutting force 70 kN, max speed 12.5 m/min
- Stroke 1,000 mm (MCB80) / 1,500 mm (80L)
- 11 kW motor, footprint 1.12 m², 3.5–4.0 t
- Upper φ55 / lower φ36 chucks, chip conveyor
MSH40 Multi-Spindle & CNC Transfer Lines
Four-spindle NC machine MSH40 omits an ATC and uses a turntable jig to cut two FCD700 swash plates or S45C gears at once. Conveyor-linked CNC transfer lines machine rocker arms and engine blocks on pallets. Spares include turntable drives, pallet fixtures, and conveyors.
- MSH40: 4-spindle ATC-less turntable design
- Palletized CNC transfer machining lines
- Workpieces: FCD700 swash plates, rocker arms
- Turntable jigs, pallet clamps, conveyors
Assembly Equipment, TIG Welders & Vision Inspection
Lineup covers engine head cam cap assembly machines with bolt feeders and nut runners, HV stator TIG welders, and camshaft vision inspection units. Systems track torque, sealant beads, and surface defects. Spares include nut runner spindles, markers, and vision sensors.
- Engine head assembly with nut runner & sealer
- HV motor stator TIG welding systems
- Camshaft cam & journal image inspection
- Nut runners, marking units, vision sensors
Compressor & Engine Components and PLC Support
IZUMI MACHINE produces compressor swash plates, lug plates, camshafts, and turbo housings while supporting _FW3**–_FWA** control spares. Listed parts include Mitsubishi Electric AnNCPU, AnACPU, AnSCPU, AnUCPU, QnACPU, QnASCPU, and A171SHCPU CPUs plus hydraulic units.
- Compressor swash plates, camshafts, turbos
- Control support for _FW3**–_FWA** frames
- Mitsubishi A2NCPU, Q2ACPU, A171SHCPU CPUs
- Linear rails, ball screws, hydraulic pumps
Selecting IZUMI MACHINE Friction Welders & CNC Equipment
IZUMI MACHINE covers friction welding from ø3 to ø200 mm (2FW003–2FW150), the LA08V CNC vertical lathe with thermal displacement within 20 μm, and 70 kN MCB80/MCB80L NC center broaching machines.
Friction welder configuration depends on mild-steel bar or pipe cross-section, dissimilar alloy pairing, single-head or XTC phase-aligned double-head layout, and peripheral modules such as burr cutting devices, disk brakes, steady rests, and automatic blank loaders.
Automotive Powertrain Machining, Assembly & Line Engineering
For high-volume compressor housings and powertrain gears, the LA08V 8-inch CNC vertical lathe eliminates warm-up cycles and 1-shift cleaning downtime, while MSH40 four-spindle NC machines eliminate ATC changeover time with dual-part turntable fixtures.
Complete production cells integrate MCB80/MCB80L zero-offset broaching units, palletized CNC transfer lines, cam cap nut-runner assembly stations, HV stator TIG welders, and camshaft image inspection systems.
IZUMI MACHINE and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of IZUMI MACHINE and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Guangdun Laser
- Equipment and parts for TAGUTI
- Equipment and parts for Hankwang Electric
- Equipment and parts for StoneAge
Documents and sources
- IZUMI MACHINE MFG. CO., LTD. — Company overview and business activities
- IZUMI MACHINE China site — corporate overview and Chinese legal name
- IZUMI MACHINE History — friction welding and broaching milestones
- Machine Tool Business — overview of friction welders, broaching and lathes
- Friction welding machines lineup — 2FW003 to 2FW150 series
- 2FW003 series vertical and compact friction welding machines
- 2FW030 series horizontal, double-head XTC and vertical machines
- 2FW080 series heavy single-head and double-head friction welders
- 2FW150 series friction welding machines for drill pipes and industrial parts
- LA08V CNC vertical lathe specifications for compressor housings
- MCB80 / MCB80L NC center broaching machine specifications
- MSH40 four-spindle NC machine for swash plate mass production
- CNC transfer machine systems for rocker arms and engine blocks
- Engine head cam cap assembly machine and nut runner systems
- Parts support — Mitsubishi Electric PLC and Motion CPU list for _FW series
- Maintenance and inspection services — thrust, runout and waveform checks
- Equipment relocation, installation, startup and robot teaching
