StoneAge industrial waterblast tools

Select Banshee, Barracuda, Badger, BJV/BJVE and AutoPack equipment around the operating point, connections and required package.

Banshee tube cleaning tools

Banshee tools clean tubes. Selection starts with the bore and pump operating point. Match the tool body and cleaning head to the application. The listed limits describe the family rather than a single configuration.

  • Tube ID 11.9–61 mm
  • Pressure 550–2800 bar
  • Tool diameter 9.5–33 mm
  • Application-specific head

Barracuda surface cleaning tools

Barracuda tools clean surfaces with controlled rotation. A centrifugal brake regulates speed. Replaceable nozzles match the tool to pump capacity. Specify the head configuration when ordering a service or overhaul kit.

  • Two or four jets
  • Replaceable nozzles
  • Protective shield
  • Service and overhaul kits

Badger pipe cleaning nozzles

Badger comes in different tool sizes. Compare pipe clearance, bends and hose connection before replacing a nozzle. Match pressure and flow to the specific version. Family limits are not a common operating point for every tool.

  • 4-inch and 6-inch families
  • 4-inch: 344–3000 bar
  • 4-inch: 19–132 l/min
  • 6-inch: 140–1500 bar

BJV/BJVE tools and connections

BJV/BJVE selection depends on flow and inlet connection. The catalog lists several threaded and gland-and-collar options. Confirm the exact tool designation before ordering. Family ranges do not replace the selected tool specification.

  • Family pressure 173–2800 bar
  • Flow range 13–530 l/min
  • NPT and M24 options
  • Gland-and-collar options

AutoPack mechanized feed systems

AutoPack 3L Dual Belt provides mechanized feed. Confirm the configuration and travel requirements before selecting a package. Include the existing drive arrangement in a replacement request. Feed and force ranges depend on configuration.

  • 3L Dual Belt family
  • Catalog code ABXD3L
  • Feed 213–884 mm/sec
  • Push/pull force 100–193 kg

Hoses, lances and fittings

StoneAge offers accessories for waterblasting. Select the hose, lance and fitting as parts of one pressure circuit. Confirm connection compatibility against documentation. An accessory request should identify the existing installation and the component being replaced.

  • Waterblast hoses
  • Cleaning lances
  • Connection fittings
  • Document-based selection

Selecting equipment around the operating point

We select StoneAge industrial waterblast tools around the operating point and the geometry of the cleaning task. The specification separates the tool, head, hose and accessories. For an existing installation, identify which components will remain and which must be replaced.

For a new package, review the pump, supply line and cleaning tool as one circuit. Maximum pressure and maximum flow from different versions must not be combined into a single invented rating.

Tube diameter determines the available tool size, but clearance alone does not complete the selection. Bends, access to the work area and the nature of deposits also matter. Review pump output together with losses along the hose.

Confirm the operating point for the selected configuration rather than relying on a family headline. A request may contain a known part number or a cleaning task supported by the available installation documents.

Banshee and Badger for tube and pipe work

Banshee selection starts with the tube bore and the required cleaning head. Catalog family ranges cover several tool sizes and configurations. When buying a replacement component, distinguish a head from a complete assembled tool. Badger selection also requires clearance along the actual pipe route.

A matching family name does not establish that a replacement will fit the installed connection or pass through the same bends without further checks.

A package can support an existing cleaning station or a new installation. For a replacement, compare the proposed tool with the current hose and accessories. For a new setup, agree the complete pressure circuit.

Application suitability follows the selected tool documentation and the conditions at the worksite. Keep the full manufacturer designation in the purchase specification so that similar family names do not conceal meaningful differences between versions.

Barracuda heads, jets and pump matching

Barracuda combines replaceable nozzles with controlled rotation. A centrifugal brake regulates speed, while the nozzle selection matches the tool to the pump capacity. Two-jet and four-jet arrangements serve different deposit conditions.

The manufacturer describes two jets for deeper action on thicker material and four for thinner hard deposits. Explain the intended cleaning result when requesting a configuration instead of selecting a head solely by resemblance to the old one.

A spare-parts request should distinguish the nozzles, cleaning head, protective shield and service package. Check the contents of a service or overhaul kit against the exact version. A change in operating conditions is a separate engineering decision from replacing a worn component.

The quotation should list what is included in the supply. This makes competing packages comparable and helps the receiving team prepare the installation for the selected assembly.

BJV/BJVE and high-pressure connections

The BJV/BJVE catalog lists several inlet connection options. Threaded connections and gland-and-collar arrangements are not interchangeable simply because their external dimensions look similar. Identify the complete connection on both sides of a proposed replacement.

If an adapter is involved, include the entire mating arrangement in the review. Drawings, the current tool manual and legible marking help distinguish a compatible part from one with only a similar description.

For a project with several cleaning stations, organize the specification by application point. A common pump area may serve different tools, and a shared family name may cover different configurations. Link every supplied item to its intended installation and hose circuit.

Retain documented compatible components when replacing a single assembly. Review the configuration again whenever the operating conditions or the connection arrangement changes.

AutoPack feed systems and package scope

AutoPack 3L Dual Belt is a mechanized feed system that must be matched to the working tool and installation layout. Its listed feed and force ranges vary with configuration. Comparing packages therefore starts with the selected version.

For an existing installation, identify the current drive assembly, retained accessories and desired replacement scope. For a new cleaning station, describe access to the workpiece and the intended operating arrangement before selecting the equipment.

Specify a complete system separately from individual components. This matters when part of the existing installation will remain in use. Agree the compatible assembly list before ordering. Documentation for the selected version governs installation and use.

Feed-system selection does not replace hydraulic tool matching: the two parts of the project must be reviewed together, while their individual parameters remain clearly separated in the specification.

Procurement, documentation and delivery

SpareX arranges StoneAge equipment and spare parts against an agreed specification. A request can list the required items or describe the cleaning task and existing installation. We then clarify designations, quantities, connections and package contents.

Hoses, lances and fittings are checked as connected components of the pressure circuit. Every line in the final list should have a clear purpose, and additional accessories should be identified separately.

Agree the documents expected with the selected items and the procedure for checking package contents. Identify the receiving location and handling requirements before dispatch. On arrival, compare actual marking and quantities with the approved specification.

If installation will follow delivery, consider its requirements during selection. Delivery conditions and the agreed commercial scope belong in the order documents, so the receiving team can verify the package against a definite list.

StoneAge and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of StoneAge and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.