TAGUTI Wire & Sinker EDM Filters, Wires, Guides and Fixtures

Industrial EDM consumables and precision wear components by TAGUTI Group (Suzhou TAGUTI Industrial): YT filter cartridges, molybdenum and brass wires, diamond guides, power feed contacts and stainless vises.

Wire EDM and Sinker EDM Filters (YT Series)

Cartridge filters for Wire EDM and Sinker EDM across YT-38, YT-36P, YT-19, YT-25N, YT-32, YT-23 and YT-02 series. Built with German H&V media at 5-7 um filtration, such as YT-38 (300x59x500 mm, 13.30 m2, 6.80 kg). Fit Sodick, Mitsubishi, Fanuc, Makino and AgieCharmilles machines.

  • Series: YT-38, YT-36P, YT-36Z, YT-19, YT-25N, YT-32, YT-02
  • Filtration: 5-7 um rating, German H&V double-bellow filter paper
  • Machines: AgieCharmilles, Mitsubishi, Sodick, Fanuc, Makino, Seibu
  • Ports: center bore or 20-31 mm side nipple, dual-flow housings

Molybdenum & Brass Wire, MB-9L Resin and JR-3 EDM Gels

Cold-drawn molybdenum wire from 0.12 to 0.30 mm in 2000 m and 5 kg spools for HS-WEDM machines. Brass and zinc-coated wires in 0.20 and 0.25 mm on P5, K160 and K200 reels. Mixed-bed resin MB-9L in 5 L vacuum bags and concentrated EDM gels JR-3A, JR-3B and JR-3C (1:70-80).

  • Molybdenum wire: 0.12 to 0.30 mm, 2000 m and 5 kg vacuum spools
  • Brass & zinc-coated wire: 0.20 and 0.25 mm on P5, K160, K200 reels
  • Deionizing resin MB-9L: mixed-bed grade in 5 L sealed bags
  • Working fluids: JR-3A, JR-3B brightness and JR-3C super-concentrate

Diamond Wire Guides and Power Feed Contacts

Upper and lower diamond and ruby wire guides (S140D, F110-F113, M103, M132, M133, S101, S103) from 0.205 mm bore. Precision-ground high-density carbide power feed contacts (0205898, F006, M002, M005, M011, N001) plus ceramic isolator plates M302, M307 and F316.

  • Wire guides: diamond and ruby inserts, 0.205 / 0.255 mm bores
  • Power feed contacts: 0205898, F006, M002, M005, M011, N001
  • Isolators & plates: ceramic M302/M307/F316 and sapphire plates
  • Compatibility: Sodick, Mitsubishi, Fanuc, Makino, AgieCharmilles

Guide Wheel Pulley Assemblies and Water Flushing Nozzles

Complete HS-WEDM pulley assemblies combining guide wheel, bearings, brass seat, nuts and end caps with uniaxial or biaxial steel, sapphire and ceramic wheels. Tension rollers S416, S500, M409C, M410C and flush nozzles including Makino N208-1 (18EC80A719, 9.5 mm ID).

  • Guide wheel materials: hardened steel, sapphire and ceramic
  • Assembly kit: guide wheel, bearings, brass seat, nuts, end caps
  • LS-WEDM rollers: ceramic pulley 3051799, tension S416, S500, M410C
  • Flush nozzles: Makino N208-1 (ID 9.5 mm), laminar and jet nozzles

Brass & Copper Electrode Tubes and EDM Drilling Parts

Single-hole brass and copper electrode tubes from 0.15 to 4.0 mm and multi-hole tubes from 1.2 to 4.0 mm for small-hole EDM drilling. Supplied with ceramic and diamond drill guides (Z140, Z140A, CZ140, SZ140, S140C, S140D), chucks with seals (E040-E080) and tapping electrodes.

  • Single-hole tubes: brass and copper in 0.15 to 4.0 mm diameters
  • Multi-hole tubes: 1.2 to 4.0 mm for high-speed blind/deep holes
  • Drill guides: Z140, Z140A, CZ140, SZ140, ZZ140, S140, S140C, S140D
  • Chucks & seals: E040 to E080 series plus copper tapping electrodes

Stainless Steel EDM Precision Vises and Clamping Fixtures

Workholding fixtures for Wire EDM and Sinker EDM tables: stainless steel precision vises in 0-50, 0-75, 0-100 and 0-150 mm jaw openings, round vises, extension clamps, stainless holders, magnetic bases, heightened socket screws and wire tension testers.

  • Stainless vises: 0-50, 0-75, 0-100 and 0-150 mm jaw capacities
  • Clamping tools: extension clamps, round vises and jig holders
  • Magnetic & fastener kits: magnet seats and stainless cap screws
  • Setup accessories: wire tension tester and No. 240 grinding stone

TAGUTI Group Manufacturing Structure and OEM Cross-Reference Selection

Founded in 1997 in Suzhou, TAGUTI Group integrates Kelon Institute of Applied Technology, Suzhou filter and molybdenum wire production, and export operations through TAGUTI Industrial Limited in Hong Kong.

Components are matched by machine builder OEM numbers and physical dimensions: for example, YT-38 (300 x 59 x 500 mm, German H&V 5-7 um paper, 13.30 m2, 6.80 kg) cross-references SW-40, S642D854P06 and H31 1033/20, while N208-1 nozzle (9.5 mm ID) matches Makino 18EC80A719.

Consolidated Export Lots of EDM Filters, Wires, Drilling Tubes and Vises

Global toolrooms source complete consumable packages covering Wire & Sinker EDM filters (YT-32, YT-36P, YT-19, YT-25N, YT-02), cold-drawn molybdenum wire (0.12-0.30 mm, 2000 m / 5 kg), 0.20/0.25 mm brass wire (P5, K160, K200), 5 L MB-9L resin bags and JR-3A/3B/3C gels.

For small-hole drilling and machine setup, orders combine single-hole (0.15-4.0 mm) and multi-hole (1.2-4.0 mm) electrode tubes, Z140-S140D guides, E040-E080 chucks and stainless steel vises (0-50 to 0-150 mm).

TAGUTI and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of TAGUTI and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.