NIEHOFF / Maschinenfabrik Niehoff Wire & Cable Machinery
German-engineered NIEHOFF / Maschinenfabrik Niehoff rod breakdown, multiwire drawing, annealing, double-twist stranding, rotary braiding, plating, and NPS spooling lines configured to your production specs.
Rod Breakdown Lines: MSM & EDR
Rod breakdown lines MSM 84, MSM 88, MSM 315 and high-speed EDR 13 / EDR 15 machines draw copper and aluminum rod with minimal slip. The MSM 86 / R 502 reaches 40 m/s with 85 % OEE. We supply drawing capstans, dies, annealing rings, seals, and drive sensors.
- Lines: MSM 84, MSM 88, MSM 315, EDR 13 / EDR 15
- Pay-offs & annealers: AUD, AGV 1803, R 502.2, R 503, R 603
- MSM 86 / R 502 benchmark: up to 40 m/s, 85 % OEE
- Wear parts: capstan rings, dies, contact rings, seals
Multiwire Drawing Lines: MMH & RM
Multiwire lines MMH 50, MMH 101, MMH 112, MMH 121, and MMH 132 paired with RM 121–RM 301 annealers process copper and aluminum conductors. The MMH 112 / RM 202 draws up to 16 wires per level. Serviceable spares include guide pulleys, dies, brushes, and seals.
- Models: MMH 50 / 101 / 103 / 112 / 113 / 121 / 132
- Annealers & pay-offs: RM 121–RM 301, AUF / AUS
- MMH 112 capacity: up to 16 wires per drawing level
- Parts: guide pulleys, contact rings, brushes, shaft seals
Intermediate & Inline Drawing: M 31 & MT 200
The M 31 / RI 170 cone-type machine and MT 200 / R 201 compact line handle intermediate and fine single-wire drawing. Inline configurations MT 200 / RT 202 and MT 200 / RDA 200 feed telephone and data cable extrusion. Spares cover drawing cones, die holders, and seals.
- Models: M 31 / RI 170, MT 200 / R 201
- Tandem & inline: MT 200 / RT 202, MT 200 / RDA 200
- Application: telephone and LAN data cable conductors
- Spares: step cones, die holders, emulsion circuit seals
Double-Twist Bunchers & Stranders: D & DSI
Double-twist machines D 402–D 802, D 800.6, D 1002 A, DSI 632 / 1002, and D 1252 / D 1602 / D 2002 strand data, automotive, and power conductors. The D 2002 processes up to 500 mm² (61 wires). Replacement parts include flyer bows, rotor bearings, guide bushings, and rollers.
- Series: D 402–D 802, D 800.6, D 1002 A, DSI 632 / 1002
- Heavy stranding: D 1252–D 2002 (up to 500 mm², 61 wires)
- Pay-offs & annealer: ALB 600, ATP 630, ARD 630 D, RT 202.2
- Parts: rotor bows, precision bearings, guide bushings
Rotary Braiders & Bobbin Winders: BMV, BMH & SMB
Vertical rotary braiders BMV (including the 24-bobbin BMV 124) and horizontal BMH 16 / BMH 32 machines apply metallic shields onto cables and hoses. Lines integrate optical empty bobbin detection and SMB winders. Spares cover bobbin carriers, tension springs, gears, and sensors.
- Models: BMV, BMV 124, horizontal BMH 16 / BMH 32
- Ancillaries: empty bobbin optical sensors, SMB winder
- Carrier layout: 16, 24, and 32 braiding bobbin stations
- Spares: bobbin carriers, tension springs, rotors, gears
NPS Packaging, Spoolers & Coilers
The NIEHOFF Packaging System (NPS) pairs SV 403 D spoolers (up to 2,400 m/min) with SV 402 D and SV 400 rewinders for insulated wire. Dynamic spoolers SNH, SPH, SND, S 632, SM 250 and WF / WSV / ECC coilers handle bare wire. Spares cover traverse drives, brakes, and pintles.
- NPS system: SV 403 D (2,400 m/min), SV 402 D.1/D.2, SV 400
- Spoolers: SNH 1001/1251, SPH 1001, SND 631/801, S 632, SM 250
- Coilers: WF 651, WF 802–1002, WSV, ECC 16–22, ECC 30–800
- Parts: traverse units, brake calipers, pintles, clamping actuators
Galvanic Plating WPT & Inductive Annealers RI
WPT galvanic plating lines coat non-ferrous wires and integrate STN 650 / 800 and STN 650 / 800 E.A barrel coilers with rotary swash tables. Continuous inductive inline annealers RI handle precision thermal treatment. Spares include contact assemblies, chemical seals, pumps, and inductors.
- Plating lines: WPT galvanic wire electroplating systems
- Barrel coilers: STN 650 / 800 and STN 650 / 800 E.A
- Inductive heating: RI continuous inline inductive annealers
- Parts: anode contacts, chemical-resistant seals, pumps, coils
NMI Controls, Air Separators & LifeCycle+ Upgrades
Niehoff integrates lines with the NMI (Niehoff Machine Interface), Air Separator units for inert gas supply, and Turn-Key cable plant engineering. LifeCycle+ covers ServiceBox remote diagnostics, component retrofits, and overhauls. We supply HMI panels, PLC modules, drives, and sensors.
- Controls: NMI (Niehoff Machine Interface) operator systems
- Plant systems: Air Separator inert gas units, Turn-Key lines
- Lifecycle services: ServiceBox diagnostics, line retrofits
- Electronics: HMI panels, PLC modules, servo drives, encoders
Line Engineering & Sizing for NIEHOFF / Maschinenfabrik Niehoff Machinery
Specifying a Maschinenfabrik NIEHOFF (NIEHOFF) wire or cable line starts with conductor material (copper, aluminum, or alloys), entry rod or wire diameter, target finished cross-section, required line speed, and take-up format (DIN spools, NPS reels, or barrels).
Upstream pay-offs (AUD, AGV, AUF, ALB, ATP) are matched to the drawing, bunching, or stranding machine, inline resistance or inductive annealer (R, RM, RT, RI), and NMI control architecture.
Verified Performance Benchmarks: MSM, MMH, D 2002 & NPS SV 403 D
Reduced-slip rod breakdown lines such as the MSM 86 / R 502 operate at continuous speeds up to 40 m/s with 85 % OEE, while the MSM 88 / R 503 integrates a patented heat system for lower energy draw. Multiwire MMH 112 / RM 202 lines draw up to 16 wires per level.
For medium-voltage power conductors, the D 2002 double-twist strander processes up to 500 mm² (61 wires). Downstream, the NPS SV 403 D double spooler winds insulated automotive and control wires at up to 2,400 m/min.
Braiding, Plating & Global Manufacturing Footprint
Downstream cable processing includes BMV and BMH 16 / 32 rotary braiding machines with optical empty-bobbin sensing, SMB automatic bobbin winders, and WPT galvanic wire plating lines paired with STN barrel coilers.
Founded in 1951 in Schwabach, Germany (38,450 m² main plant), NIEHOFF operates around 1,300 employees worldwide including Niehoff Machinery Changzhou (NMC, 13,000 m²) and regional facilities across Europe, Asia, and the Americas.
NIEHOFF / Maschinenfabrik Niehoff and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of NIEHOFF / Maschinenfabrik Niehoff and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for StoneAge
- Equipment and parts for TAGUTI
- Equipment and parts for Hangzhou Xinglong Pump
- Equipment and parts for ZAMBELLI Enotech
Documents and sources
- Maschinenfabrik NIEHOFF — Manufacturer homepage (machinery and LifeCycle+)
- NIEHOFF Product Catalog — MSM, MMH, MT, D/DSI, BMV/BMH, NPS, WPT and RI series
- Maschinenfabrik NIEHOFF — Company facts, milestones and capacities
- NIEHOFF Worldwide Locations (Schwabach headquarters and Changzhou plant)
- NIEHOFF Engineering & In-house Component Manufacturing
- NIEHOFF LifeCycle+ — Spare parts, ServiceBox diagnostics and modernization
