Infors HT: Multitron and Minitron incubator shakers, Minifors, Labfors and Techfors bioreactors
Technical selection of Infors HT equipment (Basel-Bottmingen, Switzerland, since 1965): Multitron, Minitron and Celltron incubator shakers, Minifors 2, Multifors and Labfors 5 bench-top bioreactors and Techfors pilot bioreactors.
Multitron incubator shakers
Configured for cell culture or microbial process conditions, it comes as a benchtop or floor-standing unit or in two- and three-unit stacks. Throws are 3, 25 or 50 mm, or adjustable 12.5–50 mm. The HEPA filter captures 99.995% of particles from 0.3 µm. Footprint: 1070 × 880 mm.
- Throw: 3, 25 or 50 mm
- Adjustable throw: 12.5–50 mm
- HEPA filter: 99.995% of particles
- Footprint: 1070 × 880 mm
Multitron Standard microbial shaker
An incubator shaker for microbial cultures: flasks up to 5 L and, per the manufacturer, over 60 L of culture in less than 1 m². A single unit runs 20–400 rpm at 25 mm throw and 20–350 rpm at 50 mm, takes up to 19 kg and has a 4–65 °C temperature setting range.
- 25 mm throw: 20–400 rpm
- 50 mm throw: 20–350 rpm
- Load: up to 19 kg
- Temperature setting: 4–65 °C
Minitron compact incubator shaker
A shaker for microorganisms and animal and plant cells that stacks two units high. A single unit runs 20–400 rpm at 25 mm throw and 20–350 rpm at 50 mm, with a 4–65 °C setting range, a 570 × 528 × 508 mm chamber and up to 12 kg load. HHC humidity control at 20–85% is optional.
- 25 mm throw: 20–400 rpm
- 50 mm throw: 20–350 rpm
- Chamber: 570 × 528 × 508 mm
- HHC humidity: 20–85%
Celltron shaker for CO2 incubators
A small shaker that sits inside a CO2 incubator, with its control unit magnetically mounted outside. Magnetic drive, 25 mm throw, 20–200 rpm and a 450 × 380 mm base. The ABS housing has an antimicrobial coating and IP54 rating and works at up to 98% non-condensing humidity and 20% CO2.
- Throw: 25 mm
- Speed: 20–200 rpm
- Base: 450 × 380 mm
- Housing: IP54
Minifors 2 bench-top bioreactor
A bioreactor for cell culture and microbial work: 1.5, 3 and 6 L vessels with 0.3–1, 0.6–2 and 1.1–4 L working volumes. The stirrer runs 150–1600 rpm in the microbial version and 24–600 rpm in the cell culture version. Four pumps and a 455 × 415 mm base unit.
- Vessels: 1.5, 3 and 6 L
- Microbial version: up to 1600 rpm
- Cell culture version: up to 600 rpm
- Pumps: 4
Multifors 2 and 3 parallel bioreactors
Multifors 2: 400, 750 and 1400 mL vessels with up to 250, 500 and 1000 mL working volume, magnetic drive and a 45 × 38 cm footprint. Multifors 3: glass vessels from 100 mL to 10 L plus single-use vessels, up to 8 pumps per vessel. Both run up to 6 vessels from one touchscreen.
- Multifors 2: 400–1400 mL
- Multifors 2, 400/750 mL: up to 1600 rpm
- Multifors 3: 100 mL to 10 L
- Up to 6 vessels per touchscreen
Labfors 5 bench-top bioreactor
A larger-scale bench-top bioreactor for microbial work in batch, fed-batch and continuous mode. Vessels of 2, 3.6, 7.5 and 13 L give working volumes from 0.5 to 10 L. Direct drive with an optional high-torque motor; up to 6 vessels run from one touchscreen controller.
- Vessels: 2, 3.6, 7.5 and 13 L
- Working volume: 0.5–10 L
- Base unit: 464 × 462 × 996 mm
- Up to 6 vessels per touchscreen
Techfors 4 and Techfors-S 2 pilot bioreactors
Stainless steel pilot bioreactors. Techfors 4: 75–750 L total, up to 500 L working volume, vessel rated −10 to +150 °C and −1 to +4 bar, sterilised at 110–125 °C. Techfors-S 2 for microbial processes: 15, 30 and 45 L vessels with up to 30 L working volume. TechCIP cleans both.
- Techfors 4: 75–750 L
- Techfors 4 working volume: up to 500 L
- Vessel: −10 to +150 °C
- Techfors-S 2: 15, 30 and 45 L
Choosing an incubator shaker: Multitron, Minitron or Celltron
The Multitron is configured for cell culture or microbial conditions: 3, 25 or 50 mm throw or adjustable 12.5–50 mm, a HEPA filter capturing 99.995% of particles from 0.3 µm, and two- or three-unit stacks on a 1070 × 880 mm footprint.
The Multitron Standard is built for microbial cultures: flasks up to 5 L, 20–400 rpm per single unit at 25 mm throw and up to 19 kg load.
The Minitron is more compact: a 570 × 528 × 508 mm chamber, a 4–65 °C setting range, up to 12 kg load and optional HHC humidity control at 20–85%. The Celltron has no chamber of its own and sits inside a CO2 incubator: 25 mm throw, 20–200 rpm, 450 × 380 mm base.
Bench-top bioreactors: Minifors 2, Multifors and Labfors 5
The Minifors 2 is a stand-alone bioreactor for cell culture and microbial work: 1.5, 3 and 6 L vessels, up to 4 L working volume, stirring up to 1600 rpm in the microbial version and up to 600 rpm in the cell culture version.
The Multifors 2 suits small volumes and parallel runs: 400, 750 and 1400 mL vessels with magnetic drive, up to 6 vessels per touchscreen.
The Multifors 3 handles glass vessels from 100 mL to 10 L and single-use vessels, with up to 8 pumps per vessel. The Labfors 5 covers larger microbial volumes: vessels from 2 to 13 L, with 2.2–10 L working volume in the 13 L vessel, direct drive and up to 6 vessels per touchscreen.
Pilot scale: Techfors 4 and Techfors-S 2
The Techfors 4 is a stainless steel bioreactor with 75, 150, 300 or 750 L total volume and up to 500 L working volume; the vessel is rated −10 to +150 °C and −1 to +4 bar, is sterilised at 110–125 °C and has a bottom drive with a double mechanical seal.
The Techfors-S 2 moves microbial processes from bench to pilot scale: 15, 30 and 45 L vessels with up to 30 L working volume and dimensions from 903 × 833 × 1890 mm. The mobile TechCIP unit cleans both bioreactors in place.
Infors HT and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Infors HT and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Biolin Scientific
- Equipment and parts for Biotage
- Equipment and parts for Alicat Scientific
- Equipment and parts for Agilent Spectroscopy
Documents and sources
- Company history — founded in 1965
- About the company — family-owned business
- Multitron shaker — specifications
- Multitron Standard shaker — overview
- Multitron Standard — data sheet
- Minitron — data sheet
- Celltron shaker — overview
- Celltron — data sheet
- Minifors 2 bioreactor — overview
- Minifors 2 — data sheet
- Multifors 2 bioreactor — overview
- Multifors 2 — data sheet
- Multifors 3 bioreactor — overview
- Labfors 5 bioreactor — overview
- Techfors 4 — data sheet
- Techfors-S 2 bioreactor — overview
- Incubator shaker services — maintenance
- Bioreactor services — maintenance
