TDK / EPCOS Industrial Passive Components, Power Capacitors & Sensors

Engineering selection and quotation for TDK / EPCOS (TDK Electronics) ModCap and PhaseCap power capacitors, aluminum electrolytics, MLCCs, ferrite cores, EMC filters, SIOV varistors, NTC/PTC thermistors, and industrial sensors.

Power DC-Link & PFC Capacitors

ModCap HF DC-link capacitors of the B25647A series cover rated voltages from 900 V to 1600 V DC, capacitance from 640 μF to 1850 μF, and rated currents from 160 A to 210 A at up to 90 °C hot-spot temperature. B25695E handles 700–1300 V DC. PhaseCap and DeltaCap cover low-voltage PFC.

  • ModCap HF B25647A: 900–1600 V DC
  • B25695E: up to 110 A, 120,000 h
  • PFC cans: PhaseCap, DeltaCap, PhiCap
  • Self-healing metallized plastic film

Electrolytic & Ceramic MLCC Capacitors

TDK / EPCOS aluminum electrolytic capacitors in screw-terminal, snap-in, axial, and hybrid polymer executions serve frequency converters, UPS, and solar inverters. Ceramic lines span CGA/C MLCCs up to 3 kV, MEGACAP CKG/CA, CeraLink B58031 up to 900 V, and UHV discs up to 50 kV DC.

  • Screw-terminal & snap-in industrial series
  • Hybrid polymer low-ESR ripple designs
  • CGA/C MLCCs, MEGACAP & CeraLink 900 V
  • UHV/FHV ceramic series 15–50 kV DC

Ferrite Cores & Power Inductors

TDK / EPCOS soft Mn-Zn and Ni-Zn ferrites, including low-loss PEM95 and high-power PEL95 materials, come in PQ, ETD, EFD, planar ELP/ER/EQ, RM, EP, PM, UU, and toroid T geometries. Matching coil formers, SMD/leaded inductors, flat-wire inductors, and PFC chokes complete the range.

  • Mn-Zn & Ni-Zn ferrites (PEM95, PEL95)
  • PQ, ETD, EFD, RM, EP, PM, UU & T cores
  • Planar ELP/ER/EQ & mounting coil formers
  • SMD, leaded & high-current PFC chokes

EMC Filters & Common-Mode Chokes

TDK / EPCOS EMI/EMC components span AC and DC power-line filters rated up to 2500 A, output and LCL filters, power electronics reactors, and LeaXield active leakage current filters. Board-level options include Surfind B82725S2* SMD chokes for 24–36 A, chip beads, and 3-terminal YFF filters.

  • AC/DC power line EMI filters up to 2500 A
  • Surfind B82725S2* SMD chokes: 24–36 A
  • LeaXield active earth-leakage filters
  • LCL/output filters, reactors & YFF types

SIOV Varistors & Surge Arresters

TDK / EPCOS overvoltage protection covers SIOV leaded disk varistors B72205S–B72220S for 11–1100 Vrms (up to 6500 A), ThermoFuse T14/T20/MT30/MT40 series, and HighE block varistors B72232B–B72280B up to 100 kA and 6000 J. CeraDiode SGNE04/06, TVS diodes B741*, and gas arresters are also supplied.

  • SIOV B722* disks: 11–1100 Vrms, 6500 A
  • ThermoFuse T14/T20/MT30/MT40 safety fuse
  • HighE B722* blocks: up to 100 kA, 6000 J
  • CeraDiode, TVS B741* & gas surge arresters

NTC & PTC Thermistors & Limiters

TDK / EPCOS PTC inrush current limiters J213–J252 and C750–C758 support DC-link pre-charge circuits up to 1100 V. Overcurrent PTC series C8xx/C9xx and P11xx, PTC motor limit sensors C8/C100/D1052, and NTC thermistors NTCG, NTCWS, B57*, and B58101A* protect drives and power modules.

  • PTC inrush limiters J213–J252: up to 1100 V
  • Overcurrent PTC disks & SMD P11xx–P13xx
  • PTC motor limit sensors 60–160 °C
  • NTC sensors: NTCG, NTCWS, B57* & B58101A*

Magnetic, MEMS IMU & Industrial Sensors

TDK sensor brands TDK, Micronas, InvenSense, and Tronics deliver Hall switches, 3D HAL 37xy sensors, TMR angle and current sensors, HVC motor controllers, and MEMS accelerometers, gyros, and IMUs. Pressure, level, and ultrasonic ToF sensors round out the line.

  • Micronas Hall & 3D HAL 37xy position ICs
  • High-accuracy TMR angle & current sensors
  • InvenSense & Tronics MEMS IMUs & gyros
  • Pressure, level & ultrasonic ToF sensors

Piezo Actuators, HV Contactors, RF & CeraCharge

TDK ceramic lines span PiezoListen speakers, PiezoHapt and PowerHap actuators (1–1000 Hz), PiezoStator drives, and HVC43MC/HVC45/HVC50 HV contactors up to 1500 V / 750 A. LTCC RF filters, diplexers, baluns, ANT antennas, EDLCs, and CeraCharge 1.5 V batteries are included.

  • PiezoListen & PowerHap actuators: 1–1000 Hz
  • HVC50 HV DC contactors: 1500 V / 750 A
  • LTCC RF filters, diplexers & ANT antennas
  • CeraCharge 1.5 V SMD solid-state battery

TDK / EPCOS Engineering Profile & Product Scope

Founded in Tokyo, Japan in 1935, TDK Corporation integrated EPCOS (TDK Electronics) in 2008 and expanded its sensing portfolio with Micronas, InvenSense, and Tronics.

This catalog covers passive, power film, electrolytic, magnetic, EMC, overvoltage/thermal protection, piezo, RF, and sensor components for industrial drives, power conversion, and automation. TDK-Lambda power supplies are managed separately.

Part Selection by Ordering Code and Electrical Ratings

To prepare an accurate quotation, share the 15-digit ordering code (such as B25..., B43..., B722..., B84..., CGA..., or NTCG...) or key operating ratings including DC/AC voltage, capacitance, ripple or rated current, 8/20 μs surge energy, and ambient temperature.

SpareX sources verified component lots under commercial quotation with full documentation for international industrial buyers.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.