Dataforth signal conditioners and data acquisition
Dataforth SCM5B, SCM7B, 8B and DSCA conditioners with MAQ20 and isoLynx SLX200 systems for test, measurement and process-control applications.
SCM5B signal conditioners
SCM5B modules handle one analog input or output channel. Input versions filter and isolate sensor signals. Thermocouple, RTD and strain-gage versions use different input circuits.
- One analog channel
- Three-way isolation
- Input and output modules
- Backpanel accessories
SCM7B process signal modules
SCM7B modules condition analog signals for process control. Each module serves one channel. Input circuitry filters and linearizes sensor signals, while output versions interface to field devices.
- 14–35 VDC power
- One analog channel
- Five-pole filtering
- Backpanels and DIN mounting
SensorLex 8B miniature modules
SensorLex 8B modules fit compact measurement systems. The family covers voltage, current, temperature, position, frequency and strain inputs. The miniature package retains isolated analog signal conditioning.
- Sensor signal conditioning
- Miniature construction
- Input-specific circuits
- Embedded measurement systems
DSCA DIN-rail signal conditioners
DSCA modules mount on DIN rail and isolate one analog channel. Input versions condition sensor signals, while output versions drive field devices. Plug-in terminal blocks simplify module replacement.
- 15–30 VDC power
- Three-way isolation
- 4–20 mA output options
- 0–10 V output options
SCM9B intelligent interfaces
SCM9B connects sensors to computers and provides analog outputs. The family includes fixed and programmable versions. Serial interfaces support distributed measurement and process-monitoring applications.
- Sensor-to-computer interfaces
- RS-232 and RS-485 interfaces
- Programmable versions
- Analog input and output
DSCT two-wire transmitters
DSCT transmitters send analog sensor measurements through a current loop. The same two wires carry power and signal. Temperature, current and voltage versions are selected by the required sensor input.
- Two-wire connection
- 4–20 mA current loop
- Loop-powered operation
- DIN-rail mounting
MAQ20 data acquisition system
MAQ20 combines multi-channel I/O and communication modules on DIN rail. A backbone connects the modules and distributes power. COM2 and COM4 communication modules provide system connection interfaces.
- 1500 Vrms field-to-bus isolation
- Ethernet and USB interfaces
- RS-232 and RS-485 links
- MAQ20-BKPL system backbones
isoLynx SLX200 for 5B modules
isoLynx SLX200 combines 5B modules into a data acquisition system. Modbus RTU operates over serial interfaces. Modbus TCP is optional, and base-system accuracy is specified separately from module accuracy.
- 5B module family
- 16-bit A/D and D/A
- Modbus RTU over RS-232/RS-485
- Optional Modbus TCP
Selecting a Dataforth measurement chain
SCM5B, SCM7B and SensorLex 8B condition individual analog signals. DSCA addresses DIN-rail installations, while DSCT carries measurements on a powered current loop. Selection depends on sensor type, range, signal bandwidth and isolation arrangement.
MAQ20 and isoLynx SLX200 combine channels into data acquisition systems. Modules, backbones, power and communication interfaces must match the software and electrical design of the test bench or process-control installation.
Configuration and system interfaces
A measurement chain includes a conditioner, connection panel, power source and host interface. Matching a family name does not establish range or pin compatibility. Temperature channels also require the correct sensor type and linearization method.
Modbus TCP is optional on SLX200. MAQ20 interfaces depend on the selected communication module. Electrical wiring and software configuration must correspond to the actual system composition.
Dataforth and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Dataforth and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Advantech
- Equipment and parts for Phoenix Contact
- Equipment and parts for TURCK
- Equipment and parts for Weidmüller
