TestResources Mechanical Test Systems
Modular electromechanical, electrodynamic, and servohydraulic test machines by TestResources (USA) covering forces from a few grams to 2 MN across 50+ countries.
100, 200 & 300 Series Electromechanical UTMs
100, 200, and 300 series electromechanical frames perform tension, compression, flexure, and peel tests from sub-gram loads to 500 kN. Series 200 reaches 2,500 mm/min for elastomers. Dual-column 300 frames accept ball screws, encoders, and load cells.
- Capacity: sub-gram to 500 kN
- 200 Series speed: up to 2,500 mm/min
- Single & dual-column frames
- Parts: ball screws, belts, load cells
600 Series Static Hydraulic UTMs up to 2 MN
600 series static hydraulic frames deliver 300 kN to 2 MN for testing metal bars, rebar, wire strand, fasteners, wood, and concrete. Large columns provide high stiffness for tensile and bend tests. Serviceable assemblies include seals, valves, and pumps.
- Force capacity: 300 kN to 2 MN
- Metals, rebar, fasteners, concrete
- High-stiffness multi-column frame
- Parts: hydraulic seals, valves, hoses
800 & 840 Series All-Electric Dynamic Systems
All-electric 840 and 800 series dynamic test systems deliver up to 50 kN and 15 Hz cyclic performance with E216, E316, E326, and E426 actuators without hydraulic power units. Stroke reaches 150 mm on 800-36 and 800-48 frames. Linear bearings, encoders, and power packs are replaceable assemblies.
- Cyclic range: static to 15 Hz
- Force: ±50 N to ±50 kN oil-free
- Frames 800-36 / 800-48, 150 mm stroke
- Parts: E-series actuators, encoders
900 Series Servohydraulic Test Systems up to 100 Hz
Servohydraulic 900 frames (900H6.6, 900H10, 900H25) execute fatigue and dynamic tests up to 100 Hz and ±25 kN. Systems pair with B2 actuators and hydraulic power units. Servovalves, dynamic load cells, LVDT sensors, and seal kits support upkeep.
- Frequency: up to 100 Hz on 900H6.6
- Forces: ±6.6 kN, ±10 kN, ±25 kN
- Tabletop spacing 300–450 mm
- Parts: servovalves, LVDTs, B2 seals
Torsion, Axial-Torsion & Planar Biaxial Rigs
Multi-axis frames span 160 static (2–5,650 Nm) and 560 dynamic torsion, 131AT–316AT and 830E axial-torsion (up to 300 kN / 300 Nm), and 174/574/974 biaxial rigs up to 2 MN. Structural rigs include MAST tables and CV-joint testers. Torque cells are modular.
- 160 Series torsion: 2 to 5,650 Nm
- Axial-torsion: up to 300 kN / 300 Nm
- Planar biaxial 174/574/974 up to 2 MN
- Parts: torque sensors, rotary drives
Modular Actuators, Newton Control & Accessories
Actuators span electromechanical DA/TO (up to 25 kN), electrodynamic E2–E6 (up to 77 kN, 1 m/s), and B2 servohydraulic units (up to 2,500 kN, 110 Hz). Newton controls 1–4 channels with 16 analog inputs, TEDS, and 190+ ASTM/ISO methods with grips and chambers.
- Actuators: DA, TO, E2–E6, B2, M2
- Newton: 1–4 control channels, TEDS
- 190+ ASTM, ISO, DIN, EN, JEDEC tests
- Grips, load cells, extensometers, ovens
Drive Technology Selection: Electromechanical, Electrodynamic & Servohydraulic
Static tension, compression, flexure, peel, and shear applications use electromechanical 100 (up to 9 kN), long-travel 200 (up to 5 kN and 2,500 mm/min for elastomers and films), and dual-column 300 series frames (1–500 kN).
Heavy static loads from 300 kN to 2 MN for metals, rebar, fasteners, and concrete rely on 600 series hydraulic machines.
Cyclic and endurance testing up to 15 Hz and 50 kN runs oil-free on 840 and 800 series all-electric frames, whereas 900 series servohydraulic systems and B2 actuators extend dynamic testing up to 100–110 Hz.
Modular Sub-Assemblies, Newton Control & Global Standards Coverage
Systems combine configurable load frames, DA, TO, E, and B2/M2 actuators, TEDS IEEE 1451.4 load and torque cells, extensometers, application-specific grips, and environmental chambers.
The Newton hardware and software platform supports 1–4 control channels, 1–16 analog input channels, and 190+ preconfigured ASTM, ISO, DIN, EN, IPC, and JEDEC test methods across aerospace, automotive, medical, electronics, and civil engineering in 50+ countries.
TestResources and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of TestResources and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Instrument Technology / ITI
- Equipment and parts for Pulstec
- Equipment and parts for Bioquell
- Equipment and parts for UVA LIDKÖPING
Documents and sources
- Official TestResources Inc. Brochure (800 Series, E216–E426 actuators, Newton platform, forces up to 2 MN)
- TestResources overview on Upstar Engineering (modular approach, cyclic bend and structural test systems)
- TestResources Universal Testing Machines 100, 200, 300 & 600 Series (Yeonjin S-Tech)
- TestResources Dynamic and Fatigue Test Machines 840, 800 & 900 Series (Yeonjin S-Tech)
- TestResources Torsion Test Machines 160 & 560 Series (Yeonjin S-Tech)
- TestResources Planar Biaxial Test Machines 174, 574 & 974 Series (Yeonjin S-Tech)
- TestResources Modular Actuators DA, TO, E & B2/M2 Series (Yeonjin S-Tech)
- TestResources Custom Solutions and 50+ Countries Application Experience (Yeonjin S-Tech)
- TestResources Grips, Fixtures, Sensors, Chambers and Standards List (Yeonjin S-Tech)
