VHV Anlagenbau (VHV Anlagenbau GmbH) Bulk Conveying Equipment
Modular belt conveyors, patented steep-incline Cover Belt and Double Belt systems, above-floor FlatFeeder and BigFeeder stations, dosing units and polygon sieves by VHV Anlagenbau GmbH.
Modular Belt Conveyors
VHV Anlagenbau GmbH modular belt conveyors span belt widths from 200 to 5200 mm across multiple rack support spacings. CNC-manufactured components ensure tight tolerances, simple modification and compatibility with standard industry parts. Replaceable parts include belts, idlers, drums and drives.
- Belt width: 200 to 5200 mm
- CNC-machined modular racks
- Parts: belts, idlers, drums
- Standard industry compatibility
Steep Incline & Double-Belt Conveyors
Patented VHV Cover Belt and Double Belt conveyors elevate bulk materials vertically up to 40 meters using standard smooth belts without buckets or pouches. Adjustable clamp and seal roller stations prevent backflow and material mixing. Key wear parts are smooth belts, pressure rollers and chutes.
- Vertical lift up to 40 m
- Standard smooth conveyor belts
- Cover Belt & Double Belt tech
- Adjustable clamp roller sets
VHV FlatFeeder Receiving Stations
VHV FlatFeeder serves as an above-floor receiving station and belt conveyor for grain sizes up to 40 (60) mm, buffering an approx. 22 m³ truckload and metering from 40 to over 400 m³/h without an underground pit. Service parts include feeder belts, idlers, drives and wear plates.
- Grain size: up to 40 (60) mm
- Truckload buffer: approx. 22 m³
- Metering: 40 to >400 m³/h
- Above-floor pitless design
VHV BigFeeder Direct Loading Units
VHV BigFeeder feeds bulk materials directly into conveyor lines without cumbersome hoppers, fault-prone grates or complicated dosing stages. Its open modular layout maintains continuous flow with minimal upkeep. Replaceable elements cover belts, side seals, idlers and drive units.
- Direct bulk loading without hoppers
- Eliminates fault-prone grates
- Low-maintenance modular layout
- Parts: belts, seals, idlers, drives
Dosing & Weighing Systems
VHV dosing systems combine bolted-segment box feeders, dosing belt conveyors with spindle or push shut-off gates and height-adjustable control gates, plus belt and batch liner scales. Throughput adjusts via belt speed and layer height. Spare parts include gates, liners, load cells and drives.
- Bolted-segment box feeders
- Spindle and push shut-off gates
- Belt and calibratable batch scales
- Adjustable speed & layer height
VHV Polygon Sieves
The VHV polygon sieve separates clods from spent foundry sand using pre-tensioned sprung sieve surfaces inside a galvanized torsion-resistant body. All replacement sieves in a series share identical outer dimensions across mesh sizes. Optional air supply supports sand pre-cooling.
- Uniform outer sieve dimensions
- Pre-tensioned sprung sieve meshes
- Galvanized torsion-resistant frame
- Optional air pre-cooling ducts
VHV Belt Scraper Systems
VHV scraper systems clean smooth belts internally and externally across indoor and outdoor lines. The range includes front segment scrapers, linear 45° scrapers, headscrapers and scraper plows. Service spares cover replacement scraper blades, tensioning arms and spring assemblies.
- Front segment & headscrapers
- Linear 45° belt scrapers
- Internal & external scraper plows
- Replaceable blades & tension arms
Ancillary Units & Belt Vulcanisation
VHV modular lines integrate spindle tensioning units, synchro material distributors, spillage return systems, metal detectors, magnet systems, deflector units, impact mats and fill sensors. Maintenance spares also cover standard rubber belts and hot or cold vulcanisation splicing kits.
- Spindle belt tensioning units
- Synchro material distributors
- Detectors, magnets & impact mats
- Hot & cold belt vulcanisation
Space-Saving Bulk Handling with Steep-Incline Conveyors
VHV Anlagenbau GmbH Cover Belt and Double Belt systems transport bulk solids at steep angles or vertically up to 40 meters without transfer towers, deep basement pits or bucket elevators.
Using commercially available smooth belts cuts replacement cost and prevents material deposits and batch cross-contamination.
Combined with an above-floor VHV FlatFeeder or VHV BigFeeder receiving station, plants avoid costly underground concrete bunkers while keeping truck dwell times, dust emissions and noise low.
Specifying Modular Conveyors, Dosing and Foundry Sieves
Modular VHV belt conveyors cover widths from 200 to 5200 mm with CNC-manufactured frames tailored to aggregate, concrete, ceramics, recycling and foundry plants.
For spent foundry sand processing, galvanized VHV polygon sieves break up sand clods with pre-tensioned sprung meshes of uniform outer dimensions.
Dosing requirements are met via bolted box feeders, dosing belts with spindle or push shut-off gates, and calibratable batch or inline belt scales, paired with scraper systems and metal detectors.
VHV Anlagenbau and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of VHV Anlagenbau and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Pilot Crushtec
- Equipment and parts for Wassara
- Equipment and parts for UVA LIDKÖPING
- Equipment and parts for Kolver
Documents and sources
- VHV Anlagenbau GmbH — Company profile and heritage since 1995
- VHV Anlagenbau — Modular product system overview
- VHV Belt Conveyors — Modular rack versions (200 to 5200 mm)
- VHV Steep Incline Conveyors — Cover Belt and Double Belt technology
- VHV FlatFeeder — Above-floor receiving and metering station
- VHV BigFeeder — Direct loading without hoppers or grates
- VHV Dosing, Weighing Systems and Polygon Sieves
- VHV Scraper Systems and Ancillary Conveyor Equipment
- VHV Assembly, Commissioning and Belt Vulcanisation
- VHV Maintenance, After Sales and Spare Parts Logistics
- VHV Anlagenbau — Industrial sectors and applications
