UVA LIDKÖPING Precision Grinding Machines
UVA LIDKÖPING (Sweden) machines under the LIDKÖPING and UVA trademarks: SUU, SUUC, High Volume, SSB 62, CL 630 and CL 660 centerless, DG double disc, UVAi, UVAe, UVAie and NomyOne. Selection by part and operation.
LIDKÖPING SUU Grinding Machines
SUU 240, 320, 600 and 800 form a platform for bearing rings set up for a single external or internal operation, with rib face grinding also on SUU 240. Hydrostatic length and cross slides with linear motors give a 1000 mm/s feed rate, 0.01 μm resolution and wheel speeds up to 80 m/s.
- SUU 240 workpiece OD: 20–240 mm
- SUU 320 workpiece OD: 100–320 mm
- SUU 800 workpiece OD: 370–820 mm
- SUU 600 machine weight: 21,000 kg
LIDKÖPING SUUC Simultaneous Grinding Machines
SUUC 240, 600 and 800 grind the outer surface and the bore, or the bore and the rib face of a ring simultaneously. The part sits on shoes with magnetic chucking, the wheel is dressed during workpiece loading, and the control is Siemens Sinumerik One.
- SUUC 240 workpiece OD: 80–250 mm
- SUUC 600 loading width: 250 mm
- SUUC 800 workpiece width: 30–180 mm
- SUUC 800 machine weight: 27,000 kg
LIDKÖPING High Volume and SSB 62 Machines
High Volume: SSB 150 and 320 grind ring bores, SGP 150 and 320 the outer surface, SFP 150 and 320 the rib face of inner rings. The hydrostatic length slide has a linear motor, wheel speed up to 60 m/s, and the work head swivels from −0.5 to 30°. SSB 62 grinds bores of rings with Ø 15–80 mm OD.
- SGP 150 and 320 wheel: Ø 610 mm
- SSB 320 workpiece OD: 50–320 mm
- SFP 150 machine weight: 7,500 kg
- SSB 62 machine weight: 4,500 kg
LIDKÖPING CL 630 and CL 660 Centerless Grinders
CL 630 and CL 660 run infeed or throughfeed centerless grinding depending on the shape of the part: bars, hydraulic spools, shafts and bearing outer rings. Cartridge-type spindles allow quick wheel change, a servomotor-driven CNC dresser dresses the wheel, and the control is Siemens or FANUC.
- CL regulating spindle: 10–750 rpm
- CL 630 workpiece OD: 2.5–125 mm
- CL 630 grinding width: 295 mm
- CL 660 machine weight: 13,500 kg
LIDKÖPING DG Double Disc Face Grinders
DG 300, 400, 700 and 800 grind two parallel surfaces simultaneously with two vertical grinding wheels. Spindles are belt driven by 7.5–33 kW motors with coolant fed through them, slides run on linear roller bearings with ball screws, and dressing uses a multipoint diamond or a diamond roller.
- DG 300 workpiece OD: 5–150 mm
- DG 800 workpiece OD: 300–820 mm
- DG 400 machine weight: 8,000 kg
- DG 700 machine weight: 12,500 kg
UVA UVAi Internal Grinding Machines
UVAi performs up to five internal, or four internal and one face grinding operation in a single chucking. UVAi Twin grinds in parallel on two work heads, UVAi Index has two indexing work heads, and UVAi mc grinds the part from both sides. Parts include common rail pumps, marine nozzles and sleeves.
- UVAi bore: Ø 0.5–100 mm
- UVAi Twin bore: Ø 0.5–36 mm
- UVAi mc bore: Ø 1–36 mm
- UVAi machine weight: 5,000 kg
UVA UVAe and UVAie Grinding Machines
UVAe handles multiple plunge external grinding operations and complicated profile dressing, and suits cubic boron nitride (CBN) abrasives and match grinding. Parts are chucked or center-supported. UVAie combines internal and external grinding in a single chucking.
- UVAe workpiece OD: 1–80 mm
- UVAe grinding width: 140 mm
- UVAe machine weight: 6,000 kg
- UVAie bore: Ø 1–36 mm
UVA NomyOne Compact Internal Grinder
NomyOne grinds small to medium size components typical of the bearing, compressor, hydraulic and fuel injection industries. It has a thermally stable cast iron base, hydrostatic slides, ball bearing work heads and the UVATRONIC Go control. The Single version takes up to 3 spindles, Twin up to 2.
- NomyOne spindles: 45,000–150,000 rpm
- NomyOne Single grinding: Ø 0.5–75 mm
- NomyOne floor footprint: 2.5 m²
- NomyOne Twin machine weight: 2,600 kg
Selecting a UVA LIDKÖPING Machine by Part and Operation
LIDKÖPING machines serve bearing rings: SUU for a single operation (SUU 240 for Ø 20–240 mm parts, SUU 800 for Ø 370–820 mm), SUUC for simultaneous bore and outer surface or bore and rib face grinding, and High Volume SSB, SGP and SFP for the bore, the outer surface and the rib face of rings up to Ø 320 mm.
Shafts, bars and spools are ground on the CL 630 and CL 660 centerless grinders, parallel faces on DG 300–800. Small fuel injection and hydraulic parts go to UVA machines: UVAi for Ø 0.5–100 mm bores, UVAe for Ø 1–80 mm outer surfaces and NomyOne Single for Ø 0.5–75 mm bores.
Slides, Spindles and Wheel Dressing
On SUU and SUUC the length and cross slides are hydrostatic and driven by linear motors, with a 1000 mm/s feed rate, 0.01 μm feed resolution and wheel speeds up to 80 m/s. On High Volume machines a direct driven grinding spindle gives wheel speeds up to 60 m/s.
SUU dressing can use a rotating diamond disc, a single point diamond, a full profile diamond roller or a hydrostatic CNC radius dresser. The torque motor of this dresser keeps the dressing tool perpendicular to the wheel profile.
Spare Parts, Repairs and Upgrades
LIDKÖPING spindles, slides and dressing units are repaired in the same precision assembly shop at the factory in Sweden that built them. A part sent in for repair is first controlled and evaluated, then a quote with the delivery time is prepared.
Machines are remanufactured and re-configured for a new workpiece, control systems are exchanged, and Acoustic Emission and AirSave retrofits are available. The manufacturer has service teams in Sweden, Germany, the USA, India and China.
UVA LIDKÖPING Company
The company history began in 1875 with Lidköpings Mekaniska Verkstad in Lidköping, which entered the machine tool industry in 1902. Ulvsunda Verkstäder (UVA) of Stockholm introduced its first grinding machine in 1943.
In 2007 UVA and KMT Lidköping merged into KMT Precision Grinding AB, and in 2017 the company took the name UVA LIDKÖPING.
Today UVA LIDKÖPING AB belongs to Dacke Industri AB of the Nordstjernan group. The headquarters and main manufacturing unit are in Lidköping, with a branch office in Bromma and subsidiaries in Germany, the USA, China and India. More than 10,000 of its machines are installed around the world.
UVA LIDKÖPING and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UVA LIDKÖPING and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for STUDER
- Equipment and parts for Tschudin
- Equipment and parts for Marposs
- Equipment and parts for JTEKT / TOYODA
Documents and sources
- Home page — UVA and LIDKÖPING trademarks
- Company — owner and sites
- History — milestones since 1875
- Beijing office — Chinese company name
- SUU 240 — specifications
- SUU 320 — specifications
- SUU 600 — specifications
- SUU 800 — specifications
- SUUC 240 — specifications
- SUUC 600 — specifications
- SUUC 800 — specifications
- High Volume SSB 150 — specifications
- High Volume SSB 320 — specifications
- High Volume SGP 150 — specifications
- High Volume SGP 320 — specifications
- High Volume SFP 150 — specifications
- High Volume SFP 320 — specifications
- SSB 62 — specifications
- CL 630 centerless — specifications
- CL 660 centerless — specifications
- DG 300 — specifications
- DG 400 — specifications
- DG 700 — specifications
- DG 800 — specifications
- UVAi — specifications
- UVAi Twin — specifications
- UVAi Index — design
- UVAi mc — specifications
- UVAe — specifications
- UVAie — specifications
- NomyOne — specifications
- Aftermarket — service teams
- LIDKÖPING repairs — spindles
- UVA repairs — spindle bearings
- UVA spare parts — cards and chucks
- Remanufacturing — re-configuration
- UVA upgrade — U3 kit
- Control system exchange — Siemens cabinet
- Centerless retrofit — ball screw and Harmonic Drive
- Acoustic Emission — wheel contact
- Dittel sensor — first wheel contact
- UVA dressing system — seat straightness
- AirSave — inlet air pressure
