Nakamura-Tome Multitasking Machines and CNC Lathes

Nakamura-Tome turning and milling machines: JX-50, JX-250, NTRX-300, NTY³-150V, WT-150V, WY-150V, SC-200II and GR loaders. Selection by technical specification.

JX-50 and RX-50 Compact ATC Machines

JX-50 and RX-50 have opposed twin spindles and the NT Smart Cube tool spindle, 299 mm long, with up to 30,000 rpm. The ATC magazine holds 60 tools as standard and up to 119 as an option. JX-50 adds a lower turret, while RX-50 has a turret-less layout.

  • NT Smart Cube spindle: 30,000 rpm
  • ATC: 60 tools, 119 as an option
  • JX-50: Ø42 mm bar capacity
  • RX-50: Ø65 mm left, Ø42 mm right

JX-200, JX-250, NTRX-300 and MX-100 ATC Machines

Multitasking machines with a tool spindle and an ATC magazine. JX-200 and JX-250 add a lower turret, and the JX-200 magazine holds 80 tools. The B-axis swivels 240° on JX-250 and 225° on NTRX-300. MX-100 has a 12,000 rpm tool spindle, 20,000 rpm as an option.

  • JX-250: 240° B-axis swivel
  • NTRX-300: Ø640 mm turning diameter
  • MX-100: 12,000 rpm tool spindle
  • JX-200: 80-tool ATC magazine

NTY³-100V, NTY³-150V and NTY³-250 Three-Turret Machines

Opposed twin spindles and three turrets with up to 72 tool stations. NTY³-250 has a Y-axis on all three turrets as standard. NTY³-150V takes an optional Ø80 mm bar on the left spindle with a 28/15 kW motor, and its 7.5/3.7 kW milling drive reaches 10,000 rpm.

  • Up to 72 tool stations
  • NTY³-250: Y-axis on all turrets
  • NTY³-150V: Ø80 mm bar, option
  • NTY³-150V: milling 10,000 rpm

NTJ-100 and Super NTJ Swiveling B-Axis Turret Machines

The upper turret swivels 182° on the B-axis, so angular drilling, end milling and contour milling run with standard driven-tool holders. Up to 48 tools and opposed twin spindles. Upper turret Y-axis travel is 80 mm on NTJ-100 and 90 mm on Super NTJ.

  • B-axis turret swivel: 182°
  • Up to 48 tool stations
  • NTJ-100: lower Y-axis 65 mm
  • Super NTJ: Ø65 mm left bar

WT and NT-Flex Two-Spindle, Two-Turret Machines

Upper and lower turrets cut simultaneously on opposed spindles, with up to 48 tools on WT-100, WT-150II and WT-250II. WT-300 has box-way slides on all axes and an optional Ø102 mm bar capacity. NT-Flex is 1.38 m deep, takes up to 96 tools and runs its spindles at 8,000 rpm.

  • WT-300: Ø102 mm bar, option
  • NT-Flex: 1.38 m machine depth
  • NT-Flex: 8,000 rpm spindles
  • WT-150V: FANUC αi-D servos

WY-100V, WY-150V and WY-250L Machines with Y-Axis on Both Turrets

Opposed twin spindles and two turrets, both with a standard Y-axis, and up to 48 tools. WY-100V and WY-150V use grease lubrication on all linear axes. WY-250L has 1,200 mm between spindles for long parts, and WY-150V accepts an optional Ø80 mm bar.

  • Y-axis on both turrets
  • WY-250L: 1,200 mm between spindles
  • WY-150V: Ø80 mm bar, option
  • WY-100V/150V: grease lubrication

AS and SC Single-Turret Machines

AS-200 has an 82 mm Y-axis stroke and milling as standard, with a FANUC 0i-TF Plus control and a 15-inch touch screen. SC-200II turns up to Ø390 mm with a 15/11 kW spindle motor. SC-300II has box-way slides on all axes and weighs 9,000 kg. SC-450L turns 1,520 mm long parts.

  • AS-200: 82 mm Y-axis stroke
  • SC-200II: Ø390 mm turning diameter
  • SC-300II: 9,000 kg machine weight
  • SC-450L: 1,520 mm turning length

GR, ZEN-BEI and HAI-BEI Loaders and Work Stockers

GR-210, GR-203 and GR-201 gantry loaders handle flanges and shafts, alongside the built-in Compact Loader and the HAKO-BEI+ and RoboSync robot systems. ZEN-BEI loads shafts of Ø10–51 mm and 100–1,000 mm long, and HAI-BEI unloads them. The single-layer stocker holds 20 to 120 pallets.

  • GR-210: parts up to 10 kg ×2
  • GR-210: flanges Ø20–220 mm
  • ZEN-BEI: shafts Ø10–51 mm
  • Stocker: 20 to 120 pallets

Selecting Nakamura-Tome Machines by Part

For small precision parts from bar there are the compact JX-50 (Ø42 mm bar) and RX-50 (Ø65 mm on the left spindle) with the NT Smart Cube tool spindle and a 60-tool magazine (119 as an option).

For larger and longer parts there are the JX-200, JX-250, NTRX-300 and NTRX-300L ATC machines: NTRX-300 turns up to 640 mm in diameter, and JX-250 and NTRX-300L have 1,850 mm between spindles.

For simultaneous cutting with several tools there are multi-turret machines: NTY³ with three turrets and up to 72 tool stations, WT and WY with two turrets, and NTJ-100 and Super NTJ with an upper turret that swivels 182°.

For simpler parts there are the AS-200 and SC single-turret machines; SC-450L turns parts up to 1,520 mm long. GR gantry loaders and the ZEN-BEI shaft loader handle loading and unloading.

Control Systems and NT Software

Machines with the NT SmartX control receive software updates through the NT Update service: NT-IPS, NT Collision Guard, NT NURSE and NT Manual Guide i. AS-200 and AS-200L use the FANUC 0i-TF Plus control with a 15-inch touch screen, and WT-150V uses FANUC αi-D servos.

Functions that need ladder, parameter and NC program changes (ATC Maintenance Navigator, NT Thermo Navigator AI, One Touch Production) are not added through NT Update; their availability is checked per machine.

Nakamura-Tome Company

Nakamura-Tome Precision Industry Co., Ltd. was established in December 1960; it grew out of Nakamura-Tome Iron Works, founded by Tomeo Nakamura in 1949. In 1974 the company presented its first NC turning center, the ATM-4M, at the 7th JIMTOF.

The head office is in Hakusan, Ishikawa Prefecture. Overseas sales offices are in Korea (plant), the USA (Boston), Germany (Ingelheim), China (Shanghai), Vietnam (Hanoi) and India (Bengaluru). Besides CNC machine tools, the company builds lens and glass processing machines.

Nakamura-Tome and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Nakamura-Tome and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.