Willemin-Macodel machining centers

Technical selection of Willemin-Macodel machining centers (Switzerland): 408MT, 408MTS, 408S2, 508MT2, 508MT2 X1000, 508S2, 701S2 and 808MT2, motorized spindles and options.

408MT mill-turn machining center

The 408MT is a 6 to 7-axis mill-turn center for parts from bar stock up to Ø36 mm or individual blanks. Its pick-up unit machines a part in a single cycle on all 6 sides. The HSK-E40 motorized spindle runs at 30,000 rpm, 42,000 rpm as an option; the magazine holds 48 tools, 72 as an option.

  • Bar stock up to Ø36 mm
  • 408MT spindle: 30,000 rpm
  • 48 tools (72 option)
  • Floor area 3 m²

408MTS mill-turn machining center

The 408MTS is an 8 to 9-axis center for complex parts from bar stock up to Ø36 mm. The A-axis and the multi-axis backworking unit machine two parts at the same time. The second S3 motorized spindle with an HSK-E25 taper runs at 45,000 rpm with its own 8-tool magazine; up to 80 tools in total.

  • 8 to 9 axes
  • 408MTS S3 spindle: 45,000 rpm
  • Backworking at 0°, 90°, 180°
  • Up to 80 tools

408S2 five-axis machining center

The 408S2 is a 5 to 6-axis milling and turning center for complex prismatic parts up to 150 mm in diameter. Two rotary indexing units give a B-axis from -100° to +30° and a C-axis turning at up to 4,000 rpm. The motorized spindle reaches 42,000 rpm and the magazine holds up to 96 tools.

  • Parts up to Ø150 mm
  • 408S2 C-axis: up to 4,000 rpm
  • B-axis -100° to +30°
  • Up to 96 tools

508MT2 mill-turn machining center

The 508MT2 is a 6 to 9-axis center with linear motors for parts from Ø42 mm bar stock (51 and 65 mm as options) or blanks. X-Y-Z travel is 400-200-385 mm at a feed of 60 m/min. An optional 3-position backworking turret carries a counter-spindle turning at up to 8,000 rpm, a vise and a tailstock.

  • Bar Ø42 mm (51/65 options)
  • 508MT2 travel 400-200-385 mm
  • Counter-spindle option: 8,000 rpm
  • Linear motor axes

508MT2 X1000 machining center

The 508MT2 X1000 is a 6 to 9-axis center with 1,000 mm of X travel for Ø51 mm bar stock (65 mm as an option). The milling spindle and the turning turret machine at the same time. The turret has 12 driven positions at up to 12,000 rpm and indexes in 0.6 sec; a 224-position tool magazine is optional.

  • X travel: 1,000 mm
  • 508MT2 X1000 turret: 12 positions
  • Bar Ø51 mm (65 option)
  • Option: 224-tool magazine

508S2 five-axis machining center

The 508S2 is a 5 to 6-axis linear motor center for complex prismatic parts up to 200 mm in diameter. X-Y-Z travel is 400-200-385 mm, the Ø180 mm table carries 12 kg, and the C-axis turns at up to 4,000 rpm. The motorized spindle reaches 42,000 rpm and the magazine holds up to 120 tools.

  • Parts up to Ø200 mm
  • 508S2 table: Ø180 mm, 12 kg
  • C-axis: up to 4,000 rpm
  • Up to 120 tools

701S2 micro-machining center

The 701S2 is a micro-machining center with parallel 3-axis delta kinematics, mainly for watchmaking. The work volume is Ø52 mm by 32 mm high, and the motorized spindle with a Ø6 mm cylindrical interface runs at 80,000 rpm. A workpiece turnover unit machines mainplates and bridges on both sides.

  • 701S2 spindle: 80,000 rpm
  • Work volume Ø52×32 mm
  • 72-tool magazine
  • Power draw 2 kW

808MT2 compact mill-turn center

The 808MT2 is a mill-turn center with linear motors and Direct Drive rotary axes for parts from bar stock up to Ø27 mm or piece by piece. The S1 HSK-A25 spindle runs at 42,000 rpm, 60,000 rpm as an option; turning reaches 10,000 rpm. The magazine has 74 positions (137 option), hydraulics 50 bar.

  • Bar stock up to Ø27 mm
  • 808MT2 spindle: 42,000 rpm
  • 74 positions (137 option)
  • Floor area 1.4 m²

Choosing a Willemin-Macodel machining center

Willemin-Macodel was founded in 1974 in Delémont, Switzerland. It develops and assembles machining centers and designs its own motorized spindles and rotary indexing units. The centers come in 4 series: 40, 50, 70 and 80.

For bar stock parts the range offers the 408MT, 408MTS, 508MT2, 508MT2 X1000 and 808MT2; for prismatic parts with simultaneous 5-axis machining, the 408S2 and 508S2; for micro-machining of watch mainplates and bridges, the 701S2 with parallel delta kinematics (series 70).

Bar machining: bar diameter and spindles

Bar diameter drives the choice of model: 808MT2 up to Ø27 mm, 408MT and 408MTS up to Ø36 mm, 508MT2 Ø42 mm (51 and 65 mm as options), 508MT2 X1000 Ø51 mm (65 mm as an option).

The S1 motorized spindle of the 408MT, 408MTS and 508MT2 has an HSK-E40 taper (HSK-A40 and CAPTO C4 as options) and runs at 30,000 rpm, 42,000 rpm as an option, with air-oil lubrication.

The 808MT2 spindle is HSK-A25 at 42,000 rpm, 60,000 rpm as an option; the 408MTS adds an S3 HSK-E25 spindle at 45,000 rpm.

Spare parts, upgrades and machine checks

Willemin-Macodel supplies spare parts throughout the life cycle of a machine and, after many years of work, offers a complete refurbishment of the center. To check machine condition the maker uses Ballbar tests, geometric checks of the axes and vibration analysis of motorized spindle bearings.

Willemin-Macodel subsidiaries operate in Germany, France, the USA, China, India, Ireland and Spain.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.