Shibaura Machine Injection Molding, Die Casting Machines and Machine Tools

Shibaura Machine equipment for plastics and metal molding, extrusion and machining: EC-SXIII, DC-R, TEM, BTD, MPC, UVM and robots. Selection by technical specification.

EC-SXIII All-Electric Injection Molding Machines

EC-SXIII all-electric machines run from EC50SXIII to EC3000SXIII, with EC30SXII for the 30-ton class. Solid Clamp uses a link line toggle, two piece platens and grease-less tie rods. The S-Cube injection unit works with the INJECTVISOR V70 controller. EC3000SXIII has an ESB screw with L/D 24.

  • Clamping: 30 to 3000 tons
  • INJECTVISOR V70 controller
  • Solid Clamp clamping unit
  • EC3000SXIII: ESB screw, L/D 24

DC-R, DC-J and DC-CS Die Casting Machines

Machines for aluminum, zinc and magnesium with die locking forces from 784 kN (80 tons) to over 39,200 kN (4000 tons). DC-R uses hydraulic servo injection with 70G acceleration, 100G on the high-grade model, and TOSCAST-888 control on all models. DC-J starts at 1,350 kN, large DC-CS at 9,800 kN.

  • Die locking from 784 kN (80 t)
  • DC-R: 70G and 100G injection
  • DC-R: TOSCAST-888 control
  • DC-CS: 9,800–39,200 kN

TEM Twin Screw Extruders, Sheet and Film Lines

TEM twin screw extruders include SX ultra high torque, SS/SSG deep channel and DS ultra deep channel models for reactive processing and devolatilizing, plus TEM-26SX and TEM-18SS/DS for R&D. SPU lines produce sheet, SFPU lines produce stretched film, and the EXTVISOR controller runs the process.

  • TEM-58SS: 2880 N·m screw torque
  • R&D: TEM-26SX, TEM-18SS/DS
  • SPU sheet: PP, PE, PS
  • EXTVISOR process controller

BTD, BTH, BMC and BSF Horizontal Boring Machines

Table type boring and milling machines: BTD with table traverse and BTH with column traverse. BMC horizontal machining centers have automatic pallet change, BM-Q has a quill spindle, floor type BF uses quill feed and BSF ram feed. BTD-S comes with a Ø110 or Ø130 mm spindle or a Ø200 mm quill.

  • BTD-110S.R16: 1400×1600 mm table
  • BTD-130S.R22: 12,000 kg load
  • BTD-200QS: Ø200 mm quill
  • BSF: ram type spindle feed

MPC, MPF-FS and MCW Double Column Machining Centers

MPC-B, MPC-EII, MPC-H and MPJ are double column centers with longitudinal X-axis table movement. MPF-FS is a vertical center with an integrated column and optional five-sided machining by attachment. On MCW the cross rail travels along X over a fixed table. MP-(U) adds turning and 5-axis machining.

  • MPF-FS: spindle up to 10,000 rpm
  • MPC-H: head up to 20,000 rpm, option
  • MCW: cross rail X-axis
  • MP-(U): turning and 5 axes

TUE, TMD and TDS Vertical Lathes and Turning Centers

Vertical lathes and turning centers of the TUE(S), TSS-C, TUD, TMD and TDS series. Versions differ by column: wall, single, box-shaped or double, with the single column specialized for large-diameter workpieces. The (S) versions add milling, and turning centers also handle drilling.

  • Wall, single or double column
  • Single column: large diameters
  • (S) version: milling
  • Turning center: turning, drilling

ULG, UVM, UMP-D and GMP Precision Machines

ULC/ULG and LG grinders machine aspheric and free-form surfaces of glass lenses and molds, UVM machining centers handle precision molds and parts. UMP-D and ULR cut micro grooves for light guide, prism sheet and Fresnel lens molds, USM slices SiC and glass, and GMP presses mold optical glass.

  • UMP-D: light guide molds to 70″
  • UVM-700E(5AD): simultaneous 5-axis
  • USM: SiC, glass, fine ceramics
  • GMP: optical glass molding press

SCARA, Vertical Articulated and Cartesian Robots

THE series SCARA robots work with the TS5000 controller, TVM vertical articulated robots carry up to 20 kg and TVL robots reach a standard cycle time under 0.4 seconds. COMPO ARM BA-III Cartesian robots come in single axis to 4-axis versions, with a single-axis stroke of up to 4450 mm.

  • THE400: payload up to 5 kg
  • THE600: payload up to 12 kg
  • TVM: payload up to 20 kg
  • BA-III: stroke up to 4450 mm

Selecting Shibaura Machine Equipment by Process

For plastics molding there are EC-SXIII all-electric injection molding machines from the 30-ton class (EC30SXII) to the ultra large EC3000SXIII. For aluminum, zinc and magnesium there are DC-J, DC-R and large DC-CS die casting machines with die locking forces from 784 kN to over 39,200 kN.

TEM twin screw extruders serve compounding, SPU and SFPU lines produce polymer sheet and film.

For machining there are BTD, BTH and BSF horizontal boring machines, BMC horizontal machining centers, MPC, MPF-FS and MCW double column centers, TUE, TMD and TDS vertical lathes, and large special machines including KT and KWA roll grinders and FBH and DBH deep drilling machines.

ULG, UVM, UMP-D and GMP serve optics and precision molds, THE, TVM and COMPO ARM robots serve assembly and inspection.

Control Systems and Retrofitting

EC-SXIII injection molding machines use the INJECTVISOR V70 controller; the range also includes INJECTVISOR-V50 and INJECTVISOR-S51. DC-R die casting machines come with hydraulic (R-*) or electrical (R-E*) die locking and the TOSCAST-888 control system.

For older machine tools the manufacturer offers retrofitting: overhaul, point repair and precision adjustment, and NC replacement. Since May 2024 machine tool after-sales service is run by the group company Shibaura Machine Engineering.

Shibaura Machine Company

SHIBAURA MACHINE CO., LTD. was founded in December 1938 as Shibaura Machine Tool Co. In 1961 the company was renamed Toshiba Machine Co., Ltd., and in April 2020 it became Shibaura Machine Co., Ltd. In 2002 its semiconductor equipment division was spun off as NuFlare Technology.

Headquarters are in Tokyo and Numazu (Shizuoka). Plants include Sagami in Japan and SHIBAURA MACHINE (SHANGHAI) in China.

Shibaura Machine and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Shibaura Machine and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.