Pulstec X-ray residual stress analyzers and instruments

Technical selection of Pulstec Industrial instruments (Hamamatsu, Japan, since 1969): μ-X360J portable residual stress analyzers, Hardness EYE hardened layer testers, muraR scanners, s-Laue systems and wavefront sensors.

μ-X360J residual stress analyzer

The μ-X360J portable X-ray analyzer (2024) applies the cos alpha method: a two-dimensional detector captures the full diffraction ring. It measures residual stress, full width at half maximum and retained austenite. Tube output is 30 kV, 1.6 mA; steel takes about 40 s per spot.

  • cos alpha method, full ring
  • Tube output 30 kV, 1.6 mA
  • Cr, V, Cu, Co, Mn targets
  • Steel: about 40 s per spot

Hardness EYE hardened layer tester

Hardness EYE (2024) measures the hardened layer depth of carburized and induction hardened steel from the X-ray diffraction FWHM, with no resin embedding or mirror polishing. Cr tube at 30 kV, 1.6 mA with air cooling, 0.2-10 mm range, OK or Not Good output, about 28 kg.

  • Layer depth 0.2-10 mm
  • Cr tube 30 kV, 1.6 mA
  • Weight about 28 kg
  • OK or Not Good output

muraR surface hardness variation scanner

muraR (2019) finds hardness variation on steel surfaces by non-contact, non-destructive inspection: machining burn, grinding burn and quenching variation after heat treatment. It replaces nital etching and visual inspection; the light sensor head suits in-line or robot inspection.

  • Non-contact inspection
  • Grinding burn detection
  • Replaces nital etching
  • In-line or robot mounting

s-Laue single crystal orientation system

The s-Laue desktop system (2022) acquires Laue spots of single crystal materials: tungsten tube up to 30 kV and 1.6 mA with air cooling, vertical downward incidence, φ0.8 mm spot, 33 mm sample distance, 80 s typical measurement. 6-axis sample stage, door interlock, about 30 kg, 150 W max.

  • W tube up to 30 kV, 1.6 mA
  • φ0.8 mm spot
  • About 80 s per measurement
  • 6-axis sample stage

PWS wavefront sensors and LC-1

PWS-1000 applies the Shack-Hartmann method to measure wavefront aberration in real time and evaluates light sources and lenses. PWS-500 serves optical systems of 3.5 mm or less. LC-1 checks convex and concave lenses by the double pass method and suits 100% inspection on a line.

  • PWS-1000: Shack-Hartmann method
  • PWS-500: optics up to 3.5 mm
  • LC-1 double pass method
  • 100% lens inspection

TDS-L 3D scanners

TDS-L scanners (2014) provide 3D data with a wide dynamic range for robot vision and customized measuring systems. The APC function removes the need for antihalation spray on glossy metal, and data are not averaged. Ambient light does not disturb work on production sites or outdoors.

  • No antihalation spray
  • APC automatic power control
  • Robot vision systems
  • Production sites and outdoors

Choosing a residual stress analyzer

The portable μ-X360J measures residual stress, full width at half maximum and retained austenite by the cos alpha method. Its two-dimensional detector captures the full diffraction ring, which also shows large crystal grains and crystal orientation.

The tube is chosen by the material: Cr, V, Cu, Co or Mn targets, with 30 kV, 1.6 mA output.

Applications include transportation equipment (railways, cars, ships, airplanes), bearings, iron and steel structures, electric power and heavy machines, for example when cracks appear in weld zones or after heat treatment.

For the hardened layer depth of steel, choose Hardness EYE (0.2-10 mm); for grinding burn and quenching variation on the line, choose muraR.

s-Laue for single crystals

s-Laue checks and adjusts cutting orientation, evaluates crystallinity and processing-related crystal growth, and serves manufacturing and R&D for semiconductor devices. The integrated microscope gives precise alignment of the sample.

For large samples or on-site work, such as single crystal turbine blades, the manufacturer proposes a portable type.

Wavefront sensors and 3D scanners

PWS sensors build on technologies created in the optical disc industries: PWS-500 serves development and verification of optical devices, optical pickup objective lens inclination adjustment and laser beam monitoring. LC-1 evaluates transmitted wavefront, including aspherical lenses.

A PWS-1000 DUV model followed in December 2025.

TDS-L scanners measure wear of consumables and correct the welding point with a welding torch attached to a robot.

Pulstec and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Pulstec and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.