Heise precision pressure gauges and calibrators
Technical selection of Heise instruments (Ashcroft Inc., USA): CM, CMM and CC dial gauges, 3084-3089 digital test gauges, the PTE-2 handheld calibrator, 901 and PM indicators, DXD and HPO transducers, HVC controllers and hand pumps.
CM precision dial gauges
CM is a mechanical Bourdon tube gauge to ASME B40.100 Grade 4A with ±0.1% of span accuracy. Ranges run from 15 to 100,000 psi, the pointer turns up to 350 degrees over up to 1500 divisions. Dials are 6, 8 1/2, 12 and 16 inches; no power is needed and the tube can be flushed of trapped gas.
- Accuracy ±0.1% of span
- Ranges 15 to 100,000 psi
- Pointer rotation up to 350°
- Up to 1500 dial divisions
CMM gauges with 660° pointer rotation
CMM is a precision gauge with 660 degrees of pointer rotation and up to 1600 divisions; a small scale indicator pointer shows which revolution the main pointer is on. Accuracy is ±0.1% of span, ranges run from 30 to 10,000 psi, and dials are 6, 8 and 12 inches.
- Pointer rotation 660°
- Up to 1600 dial divisions
- Ranges 30 to 10,000 psi
- Accuracy ±0.1% of span
CC gauges up to 30,000 psi
CC is a precision gauge with 300 degrees of pointer rotation and up to 1500 divisions, ranges from 12 to 30,000 psi and 8 1/2, 12 and 16 inch dials. Options: a slotted link protects the movement on a sudden pressure drop, and thermal compensation holds accuracy from -25 to +125 °F.
- Ranges 12 to 30,000 psi
- Pointer rotation 300°
- Option: slotted link
- Thermal compensation -25 to +125 °F
Digital test gauges 3084, 3086 and 3089
Battery powered digital test gauges with a silicone MEMS sensor. Total error band accuracy, including temperature from 0 to 150 °F, is ±0.25% of span for 3084, ±0.10% for 3086 and ±0.05% for 3089. Ranges go to 7,000 psi, the enclosure is IP65, and field recalibration is possible.
- 3089 accuracy ±0.05% of span
- 3084 accuracy ±0.25% of span
- Ranges up to 7,000 psi
- Enclosure rating IP65
PTE-2 handheld calibrator
PTE-2 measures pressure, temperature, current and voltage; two bays take interchangeable pressure modules from 0.25 in. H2O to 10,000 psi with accuracy from ±0.025% to ±0.1% of span. It logs up to 16,000 records, has USB and an SD slot, and supplies 24 V loop power up to 35 mA.
- Modules ±0.025% to ±0.1%
- Modules up to 10,000 psi
- Data log up to 16,000 records
- Loop power 24 V, 35 mA
901 and PM digital pressure indicators
The 901A and 901B indicators have a permanently installed pressure sensor, ±0.07% and ±0.035% of span accuracy, an LED display and an RS232 interface. The PM, with one or two permanently installed pressure or temperature sensors, is used where accurate secondary transfer standards are needed.
- 901A accuracy ±0.07% of span
- 901B accuracy ±0.035% of span
- PM: one or two sensors
- RS232 digital interface
DXD and HPO pressure transducers
DXD is a digital transducer with ±0.02% of span total error band and a 15 ms update rate: up to 99 units share one RS232 port, 32 on an RS-485 line, and a USB version exists. HPO is an analog transducer with ±0.05% of span accuracy and 0-5 V, 0-10 V, ±5 V or 4-20 mA output.
- DXD: ±0.02%, 15 ms update
- DXD: up to 99 units on RS232
- HPO accuracy ±0.05% of span
- HPO output 4-20 mA or 0-10 V
HVC volume controllers and hand pumps
HVC-1000 and HVC-3000 volume controllers set pressure precisely in a closed pneumatic system from vacuum to 1,000 and 3,000 psi, with 0.00025 and 0.0005 psi resolution; an integral balance valve equalizes pressure. The QTHP hydraulic hand pump reaches 345 bar, the DCAP pneumatic pump 45 bar.
- HVC-3000: up to 3,000 psi
- HVC-1000 resolution 0.00025 psi
- QTHP hydraulic: up to 345 bar
- DCAP pneumatic: up to 45 bar
Choosing a Heise dial gauge
Heise dial gauges cover ranges from 0-12 psi to 0-100,000 psi, with dials from 6 to 16 inches and single or double revolution pointers. All three series are rated at ±0.1% of span, and Heise accuracy specs use the terminal point method, so every point on the scale falls within tolerance.
CM is rated for pressures up to 100,000 psi with pointer rotation up to 350 degrees. CMM, with 660 degrees and up to 1600 divisions, gives a finer scale division in ranges to 10,000 psi. CC, with 300 degrees, goes to 30,000 psi on 8 1/2, 12 and 16 inch dials.
Digital gauges, calibrators and indicators
For checking instruments on site there are the 3084, 3086 and 3089 digital test gauges at ±0.25%, ±0.10% and ±0.05% of span, and the PTE-2 handheld calibrator in an IP65/NEMA 4X enclosure, which measures pressure with interchangeable modules as well as current and voltage.
For the laboratory, the 901A and 901B indicators have a permanently installed sensor (±0.07% and ±0.035% of span), and the PM with one or two sensors serves as a secondary transfer standard.
Transducers and pressure sources for test stands
Test stands and automated calibration systems use DXD transducers with RS232, RS-485 or USB digital output and HPO analog transducers with voltage or 4-20 mA output; both are offered from vacuum to 10,000 psi.
Test pressure comes from the HVC-1000 and HVC-3000 volume controllers in a pneumatic system, the QTHP hydraulic hand pump or the DCAP pneumatic pump. The DPPV combination pump switches from vacuum to pressure by twisting a knob.
Heise and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Heise and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
Documents and sources
- Home page — pressure instruments
- About — brand history
- Pressure gauges — series overview
- CM dial gauge — specifications
- CMM dial gauge — specifications
- CC dial gauge — specifications
- 3084, 3086 and 3089 digital gauges — specifications
- PTE-2 handheld calibrator — specifications
- 901A and 901B indicators — specifications
- PM dual display indicator — specifications
- DXD digital transducer — specifications
- HPO analog transducer — specifications
- HVC volume controllers — specifications
- QTHP hydraulic hand pump — specifications
- DCAP pneumatic hand pump — specifications
- DPPV pressure and vacuum pump — specifications
- Calibration service and repair — factory service
- CC, CM, CMM instructions — installation and operation
- 3084-3089 manual — setup and calibration
- PTE-2 data sheet — functions and modules
- HQS module upgrade — factory program
- ISO 17025 laboratory — instrument calibration
- FAQ — accuracy and methods
