Zippy Technology / EMACS Industrial Power Supplies & Micro Switches
EMACS industrial and server power supplies (CRPS 300-3200W, 1U/2U redundant, 54V AI, medical) and ZIPPY snap-action, IP67, and diagnostic micro switches by Zippy Technology Corp.
CRPS Redundant Modules EMACS (ZRH, ZRP, BZRH, DZRP, ZRE)
EMACS CRPS modules across ZRH, ZRP, BZRH, DZRP, and ZRE PoE series serve data centers, telecom racks, and edge servers. Output spans 300W to 3200W with 90-264VAC, 24VDC, and -48VDC inputs. Units provide PMBus 1.2 telemetry, hot-swap latches, and 5000m altitude operation.
- Power: 300W to 3200W
- Efficiency: >96% Titanium
- Size: 185x73.5x40 or 140 mm
- Control: PMBus 1.2 & FRU
1U, 2U & N+1 Redundant Systems EMACS (M1U, M1K, G1W, MRG)
EMACS 1U, 2U, Slim, and Mini Redundant assemblies including M1U, S1U, USP, M1K, G1W, MRG, and MRW operate in N+1 and N+N architectures. Cold redundancy and +/-3% active current balancing extend service life. Ruggedized builds cover -40C to 70C with 25-300 um conformal coating.
- Output: 60W to 3200W
- Current sharing: +/-3%
- Temp: -40C to 70C, 95% RH
- Protection: OVP, OCP, OTP, SCP
Single, AI Server & Medical PSUs EMACS (P1H, M1U, MHG2)
EMACS single power supplies across P1H, P1P, H1U, P2G, FLEX, ATX-PS2, and Open Frame deliver 50W to 2000W. For AI GPU servers, 54V models M1U-2AF0T48 and M1U-2AF0T54 reach 97.5% conversion efficiency. Medical units MHG2-P and MP1S meet IEC 60601-1 2xMOPP isolation.
- Wattage: 50W to 2000W
- 54V AI efficiency: 97.5%
- Form factors: 1U, 2U, FLEX, ATX
- Medical: IEC 60601-1 2xMOPP
Snap-Action Basic Micro Switches ZIPPY (DA, DF, DF3, SM, SM1)
ZIPPY snap-action switches in DA, DF, DF3, DM, DS, SM, SM1, SM1-N, and SM2 series fit automation controls, appliances, and precision peripherals. Footprints span 8.6x4.8x3.1 mm to 19.8x6.4x10.6 mm. Electrical ratings cover 0.1A to 16A at 125/250VAC and 30VDC.
- Series: DA, DF, DF3, SM, SM1
- Rating: 0.1A to 16A 250VAC
- Compact size: from 8.6x4.8x3.1 mm
- DF3-P1 life: 60M cycles
Waterproof IP67 Switches ZIPPY (DFW, DW, DW2, DW3, SW, SW2)
ZIPPY sealed switches across DFW, DW, DW2, DW3, DW32, DW33, SW, and SW2 series deliver IP67 ingress protection against moisture and dust. Options span 12A/250V SW2-12A power models to 0.1A/30VDC sliding-contact DW3 units. Available with pre-wired leads, levers, and rollers.
- Sealing: IP67 waterproof
- High load: SW2-12A 12A 250V
- Series: DFW, DW, DW2, DW3
- Sliding contact: DW3 / DW32
Diagnostic Switches & Assemblies ZIPPY (Resistor, AN, P1-P8, RE)
Holding 341 switch patents, Zippy builds diagnostic switches with built-in resistors across DFW, DW, DW2, SW, and SW2 for safety circuits. The range adds AN/KC rotary, P1-P8 push, RE/RF rocker, CNR low-torque, and DIP switches. Wire and PCB assemblies meet IATF 16949.
- Diagnostic: built-in resistor
- Types: AN/KC, P1-P8, RE/RF, DIP
- Patents: 341 switch patents
- Custom: wire & PCB assemblies
Industrial Power Architecture by Zippy Technology / EMACS
Founded in 1983, Zippy Technology Corp. markets server and industrial power supplies under the EMACS brand (established 1993) and precision micro switches under the ZIPPY brand.
Power portfolios span CRPS modules from 300W to 3200W, 1U/2U and N+1 redundant hot-swap assemblies, plus FLEX, ATX-PS2, and IEC 60601-1 2xMOPP medical units.
Engineering capabilities include PMBus 1.2 / SMBus telemetry with FRU logging, +/-3% active current sharing, 5000 m altitude rating, 80 PLUS Titanium efficiency above 96% (reaching 97.5% on 54V AI GPU server models M1U-2AF0T48/T54), and ruggedized options operating from -40C to 70C with 25-300 um conformal coating.
Selection Criteria for EMACS PSUs and ZIPPY Micro Switches
When specifying EMACS power supplies, confirm total wattage and N+1 redundancy headroom, input rail requirements (90-264VAC, 24VDC BZRH, or -48VDC DZRP/H), airflow direction, and chassis envelope (standard 185x73.5x40 mm CRPS or ultra-short 140 mm ZRH-2500KA).
For ZIPPY electromechanical switches (341 worldwide patents), match load current (0.1A logic signals in DA/DW3 vs. 12A-16A power loads in SW2-12A/SM1), IP67 sealing for harsh or wet environments, actuator geometry, and built-in resistor diagnostic configurations built under IATF 16949.
Zippy Technology / EMACS and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zippy Technology / EMACS and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZSE Electronic
- Equipment and parts for AutomationDirect
- Equipment and parts for Curtiss-Wright
- Equipment and parts for Alicat Scientific
Documents and sources
- About Zippy Technology Corp. (ZIPPY & EMACS)
- Electronic Components Business Unit & Diagnostic Switches
- Power Supply Division (EMACS)
- EMACS Industrial & Server Power Supply Catalog
- Titanium CRPS 300-3200W & ZRE PoE Power Solutions
- AI Server 54V Power Supply Solutions (M1U, USP)
- Ruggedized Power Supplies (-30C to 70C, Conformal Coating)
- ZIPPY Snap Action Microswitches Catalog (DA, DF, SM, SM1)
- ZIPPY Sealed Waterproof IP67 Switches (DFW, DW, DW2)
- ZIPPY Slide & Sliding-Contact Switches (DW3, DW32, DW33)
- Zippy Technology Corp. Traditional Chinese Portal
