Curtiss-Wright Exlar Actuators, Farris and Dyna-Flo Valves, Sensors

Curtiss-Wright industrial lines: Exlar roller screw actuators, joysticks and position sensors, Farris pressure relief valves and Dyna-Flo control valves. Selection by technical specification.

Exlar GTX Integrated Motor Actuators

Exlar GTX actuators combine an inverted roller screw with a T-LAM brushless servo motor in a package similar in form to a hydraulic cylinder. Frames GTX060, GTX080 and GTX100 (AC only), IP66S sealing, Hiperface, EnDat 2.2, resolver or incremental encoder feedback.

  • GTX060: 5,336 N peak (AC)
  • GTX080: 16,730 N peak (AC)
  • GTX100: 30,784 N peak
  • IP66S sealing

Exlar FTX High-Force Actuators

FTX linear actuators use a planetary roller screw to move machines from hydraulic to electric actuation. Frames FTX095 to FTX215 deliver 22 to 178 kN continuous force with strokes up to 1200 mm. All models are sealed to IP65 and mount to almost any flange mount motor.

  • FTX095: 22 kN continuous
  • FTX215: 178 kN continuous
  • Stroke: up to 1200 mm
  • IP65 sealing

Exlar KX Linear Actuators

KX compact roller screw actuators replace pneumatic cylinders and take an external DC, stepper or servo motor. Frames KX60, KX75 and KX90 offer strokes of 150 to 900 mm and 6, 11.1 and 15.6 kN continuous force. The body is sealed to IP65S.

  • KX60: 6 kN continuous
  • KX75: 11.1 kN continuous
  • KX90: 15.6 kN continuous
  • Stroke: 150–900 mm

Tritex EVA080 Valve Actuators

Tritex EVA080 is an electromechanical valve actuator for separators, plunger lifts, injection pumps and other wellhead valve applications. It integrates a servo drive, motor and roller screw actuator and is rated for a 100% duty cycle in continuous modulation.

  • Valve close: from 1 s
  • Duty cycle: 100%
  • Valve jam protection
  • Integrated servo drive

JC6000 and JC8000 Joysticks

Industrial Division joysticks for cranes, excavators, skid steer loaders and forestry machines. JC6000: single or dual axis, Hall effect or potentiometric sensing, IP66 above the panel. JC8000: Hall effect sensing, rated for 5 million cycles, 78 mm under-panel depth, IP69K electronics.

  • JC6000: IP66 above panel
  • JC8000: 5 million cycles
  • JC8000: 78 mm under panel
  • JC8000: IP69K electronics

ICT, SRH and NRH Position Sensors

Contactless sensors from the Industrial Division. ICT800 fits inside hydraulic and pneumatic cylinders: 8 mm body, 25–1000 mm range, up to 670 bar, -40 to +125 °C. The SRH880P rotary sensor is submersible to 2 m, IP68. NRH271 has one output, NRH272 adds a redundant one.

  • ICT800: 25–1000 mm range
  • ICT800: up to 670 bar
  • SRH880P: IP68 sealing
  • NRH271/272: 20–360° angle

Farris Pressure Relief Valves

Farris Engineering builds pressure relief valves. Process series 2600 and 2600L conform to API 526, with a full nozzle design, adjustable blowdown and an optional balanced bellows for air, gas, steam or liquid service. The 4200 series is a flanged spring loaded boiler safety valve.

  • 2600 Series: API 526
  • 2600 Series: bellows option
  • 4200 Series: boiler steam
  • 3800 and 6400 Series

Dyna-Flo Control Valves

DF400 is an eccentric rotary plug valve with a spring-and-diaphragm actuator: 1–6″ (DN 25–150), ASME Class 150–600, Class IV shutoff with a metal seat and VI with a PTFE seat. The 320 valve with multi-stage AxFlo trim covers 2–8″ (DN 50–200), Class 300–1500.

  • DF400: DN 25–150
  • DF400: ASME Class 150–600
  • 320 AxFlo: DN 50–200
  • 320: ASME Class 300–1500

Selecting Exlar Actuators by Force and Stroke

Exlar actuators are selected by force, stroke and motor mounting. To replace pneumatic cylinders there are KX60, KX75 and KX90 with 6–15.6 kN continuous force and 150–900 mm strokes. To replace hydraulic cylinders there are FTX095 to FTX215 with 22–178 kN continuous force and strokes up to 1200 mm.

With an integrated servo motor there are GTX060, GTX080 and GTX100 with peak force up to 30,784 N, and GSX20 to GSX60 with 2.6 to 51.3 kN continuous force. For wellhead and pipeline valves there is Tritex EVA080 with an integrated servo drive.

Curtiss-Wright Valves, Sensors and Joysticks

Farris pressure relief valves: process series 2600 and 2600L conforming to API 526 for air, gas, steam and liquid, process series 1890, 2700 and 3800, and steam safety valve series 4200 and 6400.

Dyna-Flo control valves: DF400 rotary plug valve for DN 25–150 and ASME Class 150–600, and the 320 valve with AxFlo trim for DN 50–200 and Class 300–1500.

For mobile machines the Industrial Division makes JC6000, JC8000 and JC2000 joysticks, ICT800 and ICT820 in-cylinder transducers with CAN SAE J1939 output, and SRH880P, NRH271 and NRH272 rotary sensors.

Curtiss-Wright Company

Curtiss-Wright Corporation (NYSE: CW) is a US group headquartered in Davidson, North Carolina, with a history going back to 1929. Its revenue comes from three segments: Aerospace & Industrial, Defense Electronics, and Naval & Power.

Exlar was founded in 1990 and is now an actuator brand of Curtiss-Wright Sensors & Actuation; Dyna-Flo is a business unit of the Curtiss-Wright Valves Division. This page covers industrial lines with open technical data.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.