Valcor Engineering solenoid, cryogenic and nuclear valves
Technical selection of Valcor Engineering (USA) products: SV91, SV95, SV97 cryogenic valves, general purpose, diaphragm isolated and pinch valves, nuclear valves, dispensing pumps, clutches and brakes.
SV91, SV95, SV97 cryogenic valves
Valcor cryogenic solenoid valves have two designs. SV91 uses the patented Floating Seal gate design with straight through flow, normally closed or open, Cv .20 to 4.90, up to 1,200 psi. SV95 and SV97 are direct acting poppet valves with PTFE or PFA seal disks for high cycle duty, up to 1,000 psi.
- SV91 pressure: up to 1,200 psi
- SV95, SV97: up to 1,000 psi
- SV91 flow: Cv .20 to 4.90
- SV91 design: Floating Seal
General purpose solenoid valves
Valcor 2, 3 and 4-way valves come in direct acting, piloted diaphragm, balanced poppet and piloted piston designs, with plastic, brass and stainless steel bodies. SV11/12 work up to 1,000 PSI, SV321/421 give Cv 3.3 to 29 up to 250 PSI, and SV350/450 go up to 2,200 PSI.
- SV350/450: up to 2,200 PSI
- SV321/421 flow: Cv 3.3 to 29
- Zero differential: SV320, SV327
- Seals: Buna, EPR, PTFE, Rulon
SV51/52 diaphragm isolated valves
In SV51 and SV52 valves an elastomeric or PTFE diaphragm keeps the fluid away from the internal metal operating parts. Bodies are PTFE or polypropylene, normally closed or normally open, rated up to 125 psig. For high purity, corrosive, viscous and abrasive fluids in sterilizers and analyzers.
- SV51/52 pressure: up to 125 psig
- Body: PTFE or polypropylene
- Diaphragm: elastomer or PTFE
- Normally closed or open
SV74–SV76 isolation valves
Miniature direct acting valves: SV74 normally closed, SV76 normally open and SV75 universal 3-way. Wetted parts are PTFE, PEEK, PPS or PCTFE, and a PTFE isolating diaphragm seals on the PTFE body seat. Rated from vacuum to 30 psi, 100 psi as an option; used in chromatographs and mass spectrometers.
- Pressure: vacuum to 30 psi
- High pressure option: 100 psi
- Wetted: PTFE, PEEK, PPS, PCTFE
- Ports, surface mount, manifolds
SV23 pinch valves
SV23 pinch valves close medical grade silicone tubing, so the fluid never touches valve parts. Versions take 1, 2, 4 or 8 tubes and work as normally closed, normally open, diverter or selector valves, up to 30 psig. Tubing changes need no valve disassembly; for medical instruments and analyzers.
- SV23 pressure: up to 30 psig
- Tubes: 1, 2, 4 or 8
- Medical grade silicone tubing
- Tubing change, no disassembly
SV500 and SV600 dispensing pumps
Solenoid and pneumatic dispensing pumps are positive displacement, piston driven devices accurate to ±2%. SV560 delivers 35 to 350 ul per stroke, SV500 100 to 1250 ul and polypropylene SV603 100 to 1500 ul; SV560 makes up to 120 strokes/min on water. They feed reagents and samples to analyzers.
- Accuracy: ±2%
- SV560: 35 to 350 ul per stroke
- SV500: 100 to 1250 ul per stroke
- SV603: 100 to 1500 ul per stroke
V526 nuclear process valves
Valcor process solenoid valves for nuclear plants are designed to ASME Section III, Classes 1, 2 and 3, and qualified to IEEE 323, 344 and 382. 2-way V526B give Cv up to 50 at up to 3000 PSIG, pilot assisted V526P Cv up to 180 at 4000 PSIG, V526D and V526G up to 2500 PSIG.
- V526B: up to 3000 PSIG
- V526P flow: Cv up to 180
- Code: ASME Section III
- Continuous duty, no cool down
Air pilot valves 70900 and 13300
Valcor air pilot solenoid valves feed and exhaust air pressure to the air actuator of nuclear plant process valves and are qualified for use inside containment. Standard bodies are brass; 3-way 70900-65 give Cv 0.2 to 1.2 up to 150 PSIG, 4-way 13300-27 Cv 2.2 up to 200 PSIG. Continuous duty.
- 70900-65: up to 150 PSIG
- 13300-27: up to 200 PSIG
- 70900-65 flow: Cv 0.2 to 1.2
- Qualified inside containment
Choosing a Valcor valve
Valcor Engineering Corporation was founded in 1951 in Newark, New Jersey; its first product was a floating seal valve, where an optically flat seal disc floats between two flat seats and wipes the seat clean during actuation.
Since 1980 the plant has been in Springfield, with over 100,000 square feet and a staff of over 300 people.
The Scientific & Industrial line makes valves and pumps for medical, analytical, commercial and industrial applications: a library of more than 18,000 designs and pressures from vacuum to 2,200 psi. The Nuclear line serves nuclear power plants, laboratories and waste treatment facilities.
Valves for nuclear plants
V526 process valves are designed to ASME Section III, Classes 1, 2 and 3: V526B give Cv up to 50 at up to 3000 PSIG, V526P Cv up to 180 at 4000 PSIG, V526D and V526G up to 2500 PSIG. Air pilot valves 70900 and 13300 operate valve air actuators and are qualified for use inside containment.
Bellows sealed V522 instrument isolation valves (V522-7000, V522-7050) are rated 0 to 2000 PSIG and -320 to 1200 °F. V520 check valves work with fluid temperatures up to 650 °F; pressure and flow regulators are N stamped, and cavitating venturis limit flow regardless of downstream pressure.
Motion Control clutches and brakes
The Motion Control group, formerly Electroid, makes electromagnetic clutches and brakes for factory automation, packaging and conveyor systems. FSB failsafe brakes stop a rotating shaft in milliseconds after power interruption; some models offer a manual lever release and response as fast as 4 ms.
Power-on clutches transmit rotary motion from a motor to a parallel shaft when energized, with a zero backlash armature. Friction slip clutches and brakes handle tension control on packaging, winding and unwinding equipment.
Valcor Engineering and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Valcor Engineering and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ASCO
- Equipment and parts for Conval
- Equipment and parts for Severn Glocon
- Equipment and parts for Cryomech
- Equipment and parts for Marsh Bellofram
Documents and sources
- Home page — components since 1951
- About Valcor — history and plant
- FAQ — location and repair kits
- Scientific and industrial — overview
- Scientific and industrial support — repair
- Cryogenic solenoid valves — SV91, SV95, SV97
- General purpose solenoid valves
- Diaphragm isolated and PTFE valves
- Miniature isolation valves
- Pinch valves — SV23 series
- Dispensing and metering pumps
- Nuclear and power division
- Nuclear process solenoid valves
- Air pilot solenoid valves
- Instrument isolation valves
- Check and excess flow check valves
- Pressure and flow regulators
- Cavitating venturis
- Motion control — overview
- Failsafe brakes — FSB series
- Power-on clutches
- Slip clutches and brakes
