Valex UHP tube, fittings and ball valves

Technical selection of Valex (USA) products: 401, 301, LDEP UHP tube and fittings, HP and CFOS tube, V22 alloy, ASME BPE, manifolds, high-purity ball valves, PCW valves and sticks, CFOS gas sticks.

UHP tube and fittings 401, 301, LDEP

Electropolished Valex tube, pipe and fittings in 316L stainless steel for ultra-high purity systems. The 401 line uses single melt 316L with Ra 5, 7 and 10 µin; the 301 line has Ra 10 µin and the LDEP line Ra 20 µin. Inch tube as well as JIS and NPS pipe are made.

  • 401 line: Ra 5, 7, 10 µin
  • 301 line: Ra 10 µin
  • LDEP line: Ra 20 µin
  • 316L, electropolished

HP and CFOS tube 201, 101

Non-electropolished Valex tube and fittings for high-purity and inert gas systems; the 201, 101 and CFOS lines are cleaned for oxygen service (CFOS). Alloys are 304L, 316L or 304; the 201 line has Ra 20 and 25 µin, the 101 line Ra 30, 40 and 200 µin.

  • 201 line: Ra 20 and 25 µin
  • 101 line: Ra 30, 40, 200 µin
  • Alloys: 304L, 316L, 304
  • Cleaned for oxygen service

V22 alloy (N06022) tube

Valex 222 and 444 tube and fittings use N06022 nickel-chromium-molybdenum-tungsten alloy for corrosive gases like chlorine and bromine. The alloy resists pitting and crevice corrosion. Sizes are 1/4" to 1/2"; 222 is non-electropolished with Ra 20 µin, 444 is electropolished with Ra 5 and 10 µin.

  • 222 line: Ra 20 µin
  • 444 line: Ra 5 and 10 µin
  • Size: 1/4" to 1/2"
  • Alloy: UNS N06022

ASME BPE tube and fittings

Valex True BPE tube and fittings serve bioprocess lines in pharmaceutical production and liquid cooling in data centers. Material is 316L or 304L with mechanical or electropolished options and SF1 20 Ra or SF4 15 Ra surface finish. Inch tube runs from 1/4" to 6".

  • SF1 finish: 20 Ra
  • SF4 finish: 15 Ra
  • 316L or 304L
  • Tube: 1/4" to 6"

Manifolds and integrated assemblies

Valex manifolds, tee-headers and integrated assemblies serve UHP, CFOS and process cooling water (PCW) systems. The main run is up to 24 ft long and up to NPS 12; branches reach 6" or NPS 6. Ball, diaphragm or bellows valves can be built into the manifold.

  • Main run: up to NPS 12
  • Main run length: up to 24 ft
  • Branch: up to 6" or NPS 6
  • Valves: ball, diaphragm, bellows

High-purity ball valves

Valex high-purity ball valves fit 1/4" to 6" O.D. tube, JIS 15A to 250A and NPS 1/2 to 14, rated -29 °C to 177 °C; they are assembled in a Class 5 cleanroom and helium-leak tested. Mini ball valves, 1/4" to 3/4", are rated 1000 psig (69 barg) and up to 232 °C for nitrogen and clean air.

  • High-purity: -29 to 177 °C
  • Mini: 1000 psig (69 barg)
  • Mini: -29 to 232 °C
  • Helium-leak tested: 100%

PCW ball valves and stick assemblies

Valex valves and stick assemblies for process cooling water (PCW) loops in fabs and data centers. Full-port PCW ball valves, NPS 1/2 to 6, use oil-free stainless steel, 3-piece construction for easy maintenance and a floating ball. PCW sticks cover 5 to 100 GPM with 3/8" to 2" connections.

  • PCW valves: NPS 1/2 to 6
  • Sticks: 5 to 100 GPM
  • Connections: 3/8" to 2"
  • Valve body: 3-piece

CFOS gas sticks

The Valex CFOS gas stick combines a shut-off valve, forged pressure regulator and gauge into one stainless steel assembly. Connections are 1/4", 3/8", 1/2" and 3/4", regulators Cv 0.15 and 1.8, control pressure 15 to 150 psig (1.0 to 10.3 barg). Every stick is helium-leak and flow tested.

  • Regulator: Cv 0.15 and 1.8
  • Control: 15 to 150 psig
  • Connections: 1/4" to 3/4"
  • Helium-leak and flow tested

Choosing Valex products

Since 1976 Valex has made ultra-high purity (UHP) process components for the semiconductor, TFT/LCD and solar industries: stainless steel tube, fittings, ball valves, manifolds and gas sticks.

The headquarters is in Ventura, California, with a site in Round Rock, Texas, and plants in Pyeongtaek, Korea and Haiyan, Jiaxing, China. Valex is a subsidiary of Reliance, Inc.

Tube lines differ by processing and surface finish: electropolished 401, 301 and LDEP in 316L for UHP systems, non-electropolished 201, 101 and CFOS, cleaned for oxygen service, for high-purity and inert gas systems, 222 and 444 in N06022 alloy for chlorine, bromine and other corrosive gases, and True BPE for pharmaceutical lines.

Sizes run from 1/8" tube to NPS 24 pipe depending on the line.

Vacuum, chromatography and data center cooling

Valex vacuum tube, fittings and components serve the semiconductor, space research, material science and analytical instrumentation industries. Chromatography HPLC tubing is supplied electropolished, with inner diameter from .070" and outer diameter from .125".

For data centers Valex makes manifolds, tubing, fittings and valves for cold plate cooling, dielectric cooling and immersion cooling; process cooling water (PCW) loops use full-port PCW ball valves and PCW stick assemblies.

Quality control and testing

Assembly and cleaning take place in ISO Class 4, 5 and 6 cleanrooms per ISO 14644, and welding uses computer-controlled enclosed orbital welders.

Surface roughness is measured per ASME B46.1, surfaces are examined by scanning electron microscope per SEMI F73 and Auger electron spectroscopy per SEMI F72.

Products are helium-leak tested, tube and fittings come with an EN 10204 type 3.1 inspection document, and parts are pin stamped and laser marked.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.