Nor-Cal Products Vacuum Flanges, Traps and Feedthroughs
Nor-Cal Products (USA, Pfeiffer Vacuum brand, Busch Group): CF and ISO-KF flanges, flexible hoses, foreline and molecular sieve traps, viewports, vacuum feedthroughs, manipulators and chambers.
CF Flanges and Sealing Hardware
Nor-Cal CF flanges are 304 stainless, DN16 to DN350, rotatable and fixed. The 212-000D double sided blank is DN 25 CF (2.12″ OD) with 4 bolt holes, rated −200…450 °C with a metal seal. Joints are made with copper or silver-plated gaskets and 12-point head bolts.
- CF flanges: DN16–DN350
- 212-000D: DN 25 CF
- 212-000D metal seal: to 450 °C
- 212-000D gasket: G-212
ISO-KF Flanges and Flexible Hoses
Nor-Cal ISO-KF (NW) flanges follow ISO 2861 in DN10 to DN50, in 304 or 316L; bored weld rings fit tubes from 3/8 to 2 inches. ISO-KF flexible hoses combine 321 stainless formed bellows with 304 flanges in thin, medium and thick wall, with or without braid.
- ISO-KF flanges: DN10–DN50
- Standard: ISO 2861
- Hose bellows: 321 stainless
- Weld rings: 3/8–2″ tube
Foreline Traps and Filters
Nor-Cal traps are installed in-line in 304 stainless bodies. Particulate traps come with a 10-micron polyester or fiberglass filter, metal sieve traps with stainless steel or copper gauze, water cooled traps with up to three 1/4″ 316L coils. LN2 traps come in 4″ and 6″ bodies.
- Particulate filter: 10 micron
- 316L water coils: up to three
- LN2 traps: 4″ and 6″ bodies
- Trap body: 304 stainless
Molecular Sieve Traps and Heaters
Nor-Cal molecular sieve traps hold Zeolite 13X desiccant to remove hydrocarbons and water vapor, with a 120VAC or 208-240VAC heater. FTMS2V-40410 has a KF40 flange, a 4″ 304 stainless body and runs on 240VAC, 42W. Heater elements for repair are sold as replacement parts.
- Sieve media: Zeolite 13X
- Heater: 120 or 208-240VAC
- FTMS2V-40410: KF40 flange
- FTMS2V-40410: 240VAC, 42W
Viewports and Access Doors
Nor-Cal 7056 glass viewports come with NW, ISO and CF flanges, standard length in DN-16, 25, 40 and 50. Glass CF viewports withstand bakeout up to 400 °C, quartz CF ones no higher than 200 °C, NW and ISO viewports 200 °C. 304 stainless access doors fit 70–254 mm flanges, −20…200 °C.
- Glass CF viewports: to 400 °C
- Quartz CF viewports: to 200 °C
- Standard length: DN-16, 25, 40, 50
- Access doors: 70–254 mm
Power, Thermocouple and LN2 Feedthroughs
Nor-Cal electrical feedthroughs use alumina ceramic insulators, OFHC copper or nickel conductors and 304 stainless CF or NW flanges. Medium current ratings: copper 150 A and 5 kV, nickel 56 A and 12 kV. Thermocouple types are type K (chromel/alumel). LN2 feedthroughs use .25 and .375″ tubing.
- Medium current copper: 150 A
- Medium current nickel: 56 A, 12 kV
- Thermocouple: type K
- LN2 metal seal: −270…450 °C
Motion Feedthroughs and Manipulators
Nor-Cal magnetically coupled linear/rotary feedthroughs deliver up to 48″ of linear motion and 360° continuous rotation; bakeout is up to 200 °C with the drive removed. MLRC-275-48 has a DN 40 CF flange and 48″ stroke. Wobble sticks give Z-axis and tilt movement.
- Magnetic feedthrough: to 48″
- Rotation: 360° continuous
- MLRC-275-48: DN 40 CF
- Bakeout, drive removed: to 200 °C
Custom Vacuum Chambers
Nor-Cal chambers are made in Yreka in 304, 304L, 316 or 316L, aluminum on request; they are helium leak tested to ≤ 1×10⁻⁹ mbar·L/sec and CMM-inspected. The SAC-12 spherical chamber has 17 ports and is bakeable to 450 °C; SAC-12 300CF uses a DN 300 CF base flange, SAC-12WS a 300 WS flange.
- Leak test: ≤ 1×10⁻⁹ mbar·L/sec
- SAC-12: 17 ports
- SAC-12 300CF: DN 300 CF base
- SAC-12 bakeout: to 450 °C
Selecting Nor-Cal Products Vacuum Components
The Nor-Cal catalogue covers vacuum chambers and custom fabrication, flanges and fittings, traps and filters, viewports and doors, vacuum feedthroughs, motion feedthroughs and manipulators.
Flanges come in ISO-KF (NW), ISO-K, ISO-F, CF, ASA, Wire Seal and EVAC styles, with over 2,500 standard stainless steel flanges, fittings and hardware items in the range.
Ratings are given per part number: the 212-000D blank flange runs at −20…180 °C with an FKM seal and −200…450 °C with a metal seal. The FTMS2V-40410 trap page also lists legacy part number FTMS-4-1502-NWB-240 for matching older nameplates. The manufacturer catalogue was last updated in 2019.
Trap Maintenance and Replacement Parts
Except for in-line models with permanently sealed one-piece bodies, Nor-Cal traps disassemble with an FKM O-ring and clamps; the standard finish is beadblast, with electropolish on request. Service and consumable replacement parts are available for all trap models.
Water cooled traps have internal baffles that increase gas residence time. On LN2 traps the cold Dewar is removed without disconnecting the trap body from the vacuum line. Molecular sieve zeolite is regenerated by baking, except when the trap collects hydrocarbons.
Nor-Cal Products and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Nor-Cal Products and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for VAT Group
- Equipment and parts for Solid Sealing Technology
- Equipment and parts for Cryomech
- Equipment and parts for Montana Instruments
Documents and sources
- Home page — company and group
- Company history — timeline
- Merger news — Pfeiffer Vacuum
- Legal information — address
- Catalogs and documentation — list
- Flanges and fittings — types
- CF flanges — sizes
- 212-000D blank flange — specifications
- CF hardware — gaskets and bolts
- ISO-KF flanges — sizes
- ISO-KF hoses — materials
- Traps and filters — overview
- Particulate filter traps — filters
- Metal sieve traps — gauze
- Water cooled traps — coils
- LN2 traps — bodies
- Molecular sieve traps — zeolite
- FTMS2V-40410 trap — specifications
- Trap heaters — replacement parts
- 7056 glass viewports — bakeout
- Access loadlock doors — sizes
- Power feedthroughs — materials
- Medium current feedthroughs — ratings
- Thermocouple feedthroughs — type K
- LN2 feedthroughs — tubing
- Magnetically coupled feedthroughs — torque and stroke
- MLRC-275-48 feedthrough — specifications
- Wobble sticks — movements
- Custom chambers — materials and testing
- Surface analysis chambers — SAC-12
