Azbil / Yamatake Control Valves, Smart Positioners & Field Instruments
Azbil / Yamatake (former Yamatake Corporation, Tokyo, founded 1906): 6000 and CV3000 control valves, 700/300/200 smart positioners, GTX pressure transmitters, MagneW and F4Q flowmeters, C3A/SDC35 controllers, FL7M sensors and AUD flame detectors.
Control valves series 6000 and CV3000
Azbil 6000 and Yamatake CV3000 control valves use CFD-optimized paths for high rated Cv and wide rangeability. Models span single-seated, cage, double-seated, angle, rotary, and three-way valves. Replacement parts include trim, seats, stems, packing, and actuators.
- CFD-optimized high rated Cv flow
- Single-seated, cage and angle valves
- Rotary, three-way and anticorrosion
- Trim, seats, stems and actuators
Smart valve positioners series 700, 300 and 200
Azbil / Yamatake 700, 300, and 200 smart positioners provide current-pneumatic control with HART and FOUNDATION Fieldbus diagnostics. The 200 series uses a remote detector linked by a dedicated cable. Diagnostics pair with the AZ-1SHM HART modem and Plug-in Valstaff.
- 700, 300, 200 and rotary series
- HART and FOUNDATION Fieldbus
- Remote detector on 200 series
- AZ-1SHM modem and Plug-in Valstaff
Pressure transmitters AT9000 GTX, PTG, DSTJ 3000 and level meters
Microprocessor transmitters AT9000 GTX, DSTJ 3000 Ace+, and compact PTG measure pressure, flow, and level of gas, liquid, and vapor. The range also includes displacement and immersion level transmitters plus pneumatic instruments. Spare items cover sensor cells, seals, and boards.
- AT9000 GTX and DSTJ 3000 Ace+
- Compact gauge transmitter PTG
- Displacement and immersion level
- Sensor modules, diaphragms, boards
MagneW Plus+ flowmeters, vortex meters and F4Q mass flow controllers
Electromagnetic flowmeters MagneW Plus+ and two-wire loop-powered MagneW Neo Plus cover liquid flow measurement in process plants. Digital mass flow controller F4Q with large LED and LCD display joins vortex and micro-liquid meters. Serviceable parts include flow sensors and electronics.
- MagneW Plus+ and MagneW Neo Plus
- Digital mass flow controller F4Q
- Vortex and micro liquid flowmeters
- Flow sensor assemblies and PCBs
Single loop controllers C3A/C3B, SDC35 and HART interfaces
Single loop controllers C3A/C3B, C2A/C2B, and Yamatake SDC35 regulate temperature and process loops. Supporting devices include recorders, BU100H HART I/O modules, HNU gateways, and InnovativeField Organizer. Spare parts cover terminal bases, power units, and I/O boards.
- Models C3A/C3B and C2A/C2B
- SDC35 / SDC15 temperature series
- BU100H HART I/O and HNU unit
- Terminal bases and power modules
Proximity switches FL7M, photoelectric HP7 and limit switches
Discrete sensing spans cylindrical FL7M proximity switches, stainless-face FL7S units, and square FL2R/FL2S/FL2B models. Photoelectric lines include HP7 amplifiers, HPF fiber units, and harsh-duty H2B switches. General and explosion-proof limit switches pair with PA7/PA5 connectors.
- Cylindrical FL7M and FL7S sensors
- Square FL2R / FL2S / FL2B series
- Photoelectric HP7, HPF and H2B
- Limit switches and PA7/PA5 plugs
Burner safety controllers BC-R, AUR, AUD and GV-A gas valves
Combustion hardware spans RX, BC-R15/R25/R35, AUR255/355/455/890, and FRS100 multiburner controllers. Flame detection uses AUD100/300C/500/700 ultraviolet sensors and explosion-proof AUD900 units. Spare items include GV-A/D/G/H gas valves, CCM21/CCV20 actuators, and ATN110 transformers.
- BC-R15/25/35 and AUR/FRS100
- UV flame detectors AUD300C–AUD900
- Gas valves GV-A/D/G/H and CCV20
- Igniters S7200A and ATN110 units
Selecting Azbil / Yamatake control valves, positioners and field instruments
Selection of Azbil / Yamatake 6000 and CV3000 series control valves, 700/300/200 smart positioners, GTX transmitters, C3A/C3B controllers, F4Q mass flow controllers, and AUD/AUR flame safeguards requires full model code, process fluid, stroke, and communication protocol.
Because Yamatake Corporation was renamed Azbil Corporation in 2012, legacy Yamatake nameplate codes map across the current Azbil Advanced Automation lineup.
For pneumatic and process loops, confirm actuator action, rated Cv flow, flange standard, HART or FOUNDATION Fieldbus interface, and hazardous-area classification alongside FL7M/FL7S/HP7 switch wiring and PA7/PA5 connectors.
Combustion safety hardware and flow measurement systems by Azbil / Yamatake
Industrial furnaces and boilers rely on RX, BC-R15/R25/R35, AUR255/355/455/890, and FRS100 burner controllers paired with AUD100/300C/500/700 or explosion-proof AUD900 ultraviolet flame detectors, GV-A/D/G/H gas shutoff valves, CCM21/CCV20 proportional valves, and ATN110 ignition transformers.
Liquid and gas flow loops utilize MagneW Plus+ and two-wire MagneW Neo Plus electromagnetic flowmeters, vortex meters, and digital F4Q mass flow controllers with large LED and LCD status indicators.
Azbil / Yamatake and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Azbil / Yamatake and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Yamaichi Electronics
- Equipment and parts for Hardy Process Solutions
- Equipment and parts for Zwick Armaturen
- Equipment and parts for YMER Technology
Documents and sources
- Azbil Corporation official global website (former Yamatake Corporation)
- Azbil Corporation company overview and corporate data
- Azbil Advanced Automation portal (6000 valves, C3A/C3B, F4Q)
- Azbil HART/Fieldbus field devices: 700/300/200 positioners, GTX, MagneW
- Azbil switches and sensors: FL7M, FL7S, FL2R, HP7, PA7/PA5
- Azbil combustion safety: BC-R, AUR, AUD flame detectors, GV-A gas valves
- Azbil valve diagnostics service and smart HART modem AZ-1SHM
- Plug-in Valstaff control valve maintenance support system
