Zwick Armaturen (Zwick Valves) — TRI-CON, TRI-CHECK, TRI-BLOCK & TRI-SHARK Valves

German-engineered triple-offset metal-seated butterfly valves, damped check valves, DBB units, and throttling control valves from -215 °C to +815 °C.

TRI-CON Triple-Offset Valves

TRI-CON triple-offset butterfly valves with cone-in-cone seating operate on steam, gases, and liquids from -215 to +815 °C. Sizes DN 50–2200 cover PN 10–250 (ANSI 150–1500) to EN 12266-1 Rate A. Serviceable parts include laminated disc seals, clamp rings, and shaft keys.

  • DN 50–2200 / 2"–80"
  • PN 10–250 / ANSI 150–1500
  • Temp -215 °C to +815 °C
  • Laminate seal & clamp ring

TRI-CON Cryogenic & H2 Series

TRI-CON Cryogenic, Low Temperature, and Top Entry valves handle LNG, hydrogen H2, and natural gas lines. Cryogenic sizes DN 50–1800 operate from -215 to +450 °C per BS 6364 with extended bonnets. Top Entry DN 80–900 allows inline replacement of laminate seals, packing, and bushings.

  • DN 50–1800 Cryo / 80–900 Top Entry
  • LNG, H2 & natural gas duty
  • Temp -215 °C to +450 °C
  • Inline seal & packing service

TRI-CHECK Heavy-Duty Check Valves

TRI-CHECK metal-seated check valves use triple-offset geometry to prevent reverse flow and water hammer on pump lines. Rated DN 50–1200 (2"–48") and PN 6–160 (ANSI 150–900), hydraulic damping operates from 2 bar dp and ~3 m/s flow. Spare parts cover laminate seals, shaft bushings, and damper seals.

  • DN 50–1200 / 2"–48"
  • PN 6–160 / ANSI 150–900
  • Min 2 bar dp / ~3 m/s flow
  • Damper, counterweight & seals

TRI-BLOCK Double Block & Bleed

TRI-BLOCK DBB/DIB valves integrate two TRI-CON discs and up to two bleed ports inside one EN 558-1 body for tank storage, C3/C4 hydrocarbons, and NH3. Built for DN 80–1200, PN 10–100 (ANSI 150–600) at -50 to +425 °C. Service items include dual laminate seals, shaft linkages, and packing bushes.

  • DN 80–1200 / 3"–48"
  • PN 10–100 / ANSI 150–600
  • Temp -50 °C to +425 °C
  • Up to 2 bleed ports / 1 actuator

TRI-SHARK Control Valves

TRI-SHARK valves pair triple-offset shut-off with a Sharktooth trim cartridge for 100:1 throttling and low cavitation. Sizes DN 80–900 cover PN 10–160 (Class 150–900) at -196 to +815 °C. Replaceable parts include the trim cartridge, gasket, retainer, and cap screws.

  • DN 80–900 / 3"–36"
  • PN 10–160 / Class 150–900
  • Rangeability up to 100:1
  • Field-replaceable trim cartridge

Lamellar Seals & Sealed Bearings

For cracking media, Zwick offers patented sealed bearings and low-dead-space clamp rings to prevent shaft jamming. Graphite shaft packing meets TA-Luft VDI 2440, ISO 15848-1, and API 641. Spare kits cover laminate seals, bushings, clamp screws, and body cover gaskets.

  • TA-Luft VDI 2440 / ISO 15848-1
  • Patented sealed bearing option
  • Stainless-graphite laminate seals
  • Bearing bushings & cover gaskets

Actuation & IOM Service Intervals

Valves pair with gearboxes and pneumatic, hydraulic, or electric actuators set so the closed stop lands inside the seat. Per IOM Zw-TriCon-2020, checks run every 25,000 hours with spare replacement every 50,000 hours. Hydrotests are capped at 1.5x PS open and 1.1x dp closed.

  • Closed end stop in valve seat
  • Spare interval: 50,000 / 100,000 h
  • Hydrotest 1.5x PS / 1.1x dp max
  • Packing nuts 1/4-turn tightening

Special Alloys, O2 Duty & Standards

Bodies and trim use carbon steel (WCB, LCC), stainless grades (A351 CF8M, CF8, CF3), Duplex, Monel, Inconel, Hastelloy, and HVD-1. Oxygen-service valves undergo grease-free cleaning with UV inspection. Designs meet Fire-Safe API 607 5th ed., ISO 10497, BS 6755, SIL 3, and PED H.

  • WCB, LCC, CF8M, CF8, CF3, Duplex
  • Monel, Inconel, Hastelloy, HVD-1
  • Grease-free O2 UV inspection
  • API 607, ISO 10497, SIL 3, PED H

Selecting Zwick Armaturen Series by Process Duty

Zwick Armaturen (Zwick Valves) triple-offset metal-seated valves replace bulky gate and ball valves across steam, gas, chemical, petrochemical, cryogenic, and power-generation pipelines.

Standard shut-off and throttling lines use TRI-CON (DN 50–2200, PN 10–250 / ANSI 150–1500, -215 to +815 °C).

Pump discharge lines prone to water hammer use TRI-CHECK with adjustable hydraulic damping (min 2 bar dp, ~3 m/s), isolation manifolds use single-body TRI-BLOCK DBB/DIB valves per EN 558-1, and throttling loops use TRI-SHARK with Sharktooth cartridges up to 100:1 rangeability.

Alloys, Standards, and Nameplate Traceability

Bodies and internal trims are produced in carbon steel (WCB, LCC), stainless grades (A351 CF8M, CF8, CF3), Duplex, Monel, Inconel, Hastelloy, and HVD-1, meeting Fire-Safe API 607 5th ed., ISO 10497, BS 6755, TA-Luft VDI 2440, ISO 15848-1, API 641, SIL 3, and PED 2014/68/EU Module H.

For existing installations, PED and ASME nameplates record model code M.No., serial S.No., DN, PN/Class, PS/TS limits, and alloy codes for body, disc, shaft, body seat, and replaceable laminate seal.

Zwick Armaturen GmbH (Ennepetal, industrial valves) is distinct from ZwickRoell testing machines and Zwicky filtration equipment.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.