Yamaichi Electronics — IC Sockets, Connectors and YFLEX®

Burn-in and test sockets for semiconductor packages, MSA-compliant 1.6 Tbps CN176/CN214 connectors, Y-Circ-M push-pull M12 connectors, H001 4.0 GHz automotive coax, LCP-based YFLEX® boards, and Koshin Kogaku optical filters.

IC Burn-In Sockets

Yamaichi Electronics burn-in sockets come in Open Top, Clamshell, and Cardedge designs for LCC, PLCC, BGA, LGA, QFP, QFN, SOP, SON, DIP, and PGA packages. Versions support large current and thermal control. Replaceable contacts and latches extend board service life.

  • Open Top, Clamshell, Cardedge
  • BGA, LGA, QFP, QFN, SOP
  • Thermal control and heat sink
  • Replaceable contact inserts

Test Sockets and Probe Cards

Test sockets utilize spring probe and cantilever contacts for validating memory, logic, analog, RF, optical, and power devices. Configurations include Kelvin sensing, non-magnetic housings, and system-level test heads. Spring pins and alignment plates are field-serviceable.

  • Probe and cantilever contacts
  • Kelvin 4-wire measurement
  • High-frequency and SLT
  • Serviceable pins and guides

High-Speed I/O and Optical Interconnects

The CN176 stack-type and CN214 OSFP-XD interface connectors comply with MSA standards for 1.6 Tbps Ethernet optical transceivers, alongside 800 Gbps Ethernet and 224G/ch data center interconnects. Used in WDM equipment, switches, servers, and storage. Cages and headers are replaceable.

  • CN176 and CN214: 1.6 Tbps
  • 800 Gbps and 224G/ch links
  • MSA optical transceiver fit
  • WDM, switches, and servers

Y-Circ-M Industrial M12 Connectors

Y-Circ-M circular M12 connectors are offered in overmolded and field-assembled versions featuring a push-pull lock compatible with conventional screw-lock plugs. Engineered for CNC machine tools, PLCs, servo amplifiers, and industrial robots. Field-assembled inserts simplify replacement.

  • M12 push-pull lock design
  • Overmolded and field-assembled
  • Screw-lock plug compatible
  • CNC, PLC, and robotics

Automotive Coaxial and High-Temp FPC

H001-series coaxial connectors come in pigtail and direct relay options with 4.0 GHz transmission performance for automotive cameras, ADAS, ETC, and GPS modules. High-temperature FPC connectors operate up to 150°C in vehicles and semiconductor tools. Mating headers and pigtails are replaceable.

  • H001 coaxial up to 4.0 GHz
  • Pigtail and direct relay types
  • FPC rated up to 150°C
  • ADAS cameras, ETC, and GPS

YFLEX® LCP Circuits and Optical Filters

YFLEX® flexible printed wiring boards use LCP (liquid crystal polymer) dielectric for low loss, impedance matching, and noise immunity when mating with LCD and IF connectors. Optical solutions by Koshin Kogaku Co., Ltd. deliver multilayer thin-film filters, tunable lasers, and optical modules.

  • LCP resin low-loss dielectric
  • Impedance-matched, low crosstalk
  • Mates with LCD and IF headers
  • Koshin Kogaku optical filters

Semiconductor Burn-In and Test Socket Architecture

Founded in 1956 in Tokyo (TSE Prime 6941), Yamaichi Electronics Co., Ltd. engineers high-reliability IC sockets for semiconductor validation and screening. Burn-in sockets span Open Top, Clamshell, and Cardedge configurations, while test sockets utilize spring probe and cantilever contacts.

Supported packages cover LCC, PLCC, BGA, LGA, QFP, QFN, SOP, SON, DIP, SIP, ZIP, PGA, QFJ, SOJ, and Cardedge, with specialized options for large current, heat dissipation, thermal control, non-magnetic operation, Kelvin sensing, and system-level testing.

High-Speed Interconnects, YFLEX® LCP Boards, and Optical Filters

For telecommunications and hyperscale data centers, Yamaichi Electronics manufactures MSA-compliant transceiver interfaces including CN176 and CN214 connectors rated for 1.6 Tbps Ethernet, alongside 800 Gbps Ethernet and 224G/ch interconnects.

Industrial automation lines rely on field-assembled and overmolded Y-Circ-M M12 push-pull connectors, while automotive cameras and ADAS modules use H001 4.0 GHz coaxial and 150°C FPC connectors.

YFLEX® flexible printed wiring boards built on LCP (liquid crystal polymer) dielectric deliver impedance matching and low crosstalk when mating with LCD and IF connectors, complemented by optical multilayer thin-film filters, tunable lasers, and optical modules from group company Koshin Kogaku Co., Ltd.

Yamaichi Electronics and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Yamaichi Electronics and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.